利用高能超声辅助法制备纳米SiC颗粒(n-SiC_p)增强AZ91D镁基复合材料(n-SiC_p/AZ91D),并对其显微结构和室温力学性能进行测试分析.结果表明:纳米SiC颗粒的加入能够起到细化晶粒的作用,纳米颗粒在基体中的分布比较均匀,超声波辅助技术能够有效地分散纳米颗粒,在重力铸造下所制备的复合材料的抗拉强度、屈服强度和硬度均高于基体,尤其是屈服强度较基体提高了57%.
Magnesium matrix composites reinforced with nano-sized SiC particles (n-SiC_p/AZ91D) were fabricated by high intensity ultrasonic assisted casting. The microstructure of the nanocomposites was investigated by optical microscopy, scanning electronic microscopy (SEM) methods and room-temperature mechanical properties were measured using a universal electronic material tester. The results showed that n-SiC_p addition can refine the grains, and the distribution of n-SiC_p in magnesium alloy melts is significantly improved by ultrasonic processing. Compared with the unreinforced AZ91D matrix, mechanical properties of the nanocomposites including tensile and yield strengths and hardness are remarkably improved; in particular the yield strength is increased by 57% after gravity permanent mould casting.
参考文献
| [1] | Lan J;Yang Y;Li X C .[J].Materials Science and Engineering A,2004,386:284. |
| [2] | Cao G;Kobliska J;Konishi H et al.[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2008,39(04):880. |
| [3] | Cao, G;Konishi, H;Li, X .Mechanical properties and microstructure of SiC-reinforced Mg-(2,4)A1-1Si nanocomposites fabricated by ultrasonic cavitation based solidification processing[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):357-362. |
| [4] | 陶杰;赵玉涛;潘蕾.金属基复合材料制备新技术导论[M].北京:化学工业出版社,2007:82. |
| [5] | 王俊;周尧和;舒光冀 et al.[J].铸造,1997,12:40. |
| [6] | Clyne T W;Whther P J;Yu Yongning(余永宁);Fang Zhigang(房志刚).金属基复合材料导论[M].北京:冶金工业出版社,1996:79. |
| [7] | 潘蕾,陶杰,刘子利,陈照峰.超声复合法制备的SiCP/ZA27复合材料的力学性能[J].南京航空航天大学学报,2005(05):653-658. |
| [8] | 马立群;陈锋;舒光冀 .[J].东南大学学报,1995,25(02):50. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%