欢迎登录材料期刊网

材料期刊网

高级检索

采用溶胶凝胶法,并经高温热处理在炭纤维表面制备SiC/SiO2陶瓷涂层.通过X-射线光电子能谱、X-射线衍射、扫描电镜等分析SiC/SiO2涂层的结构与形貌.通过热重分析研究炭纤维涂层前后的抗氧化性能.结果表明,均匀、无裂纹的SiC/SiO2涂层可改善炭纤维的抗氧化性能,而且涂层炭纤维的抗氧化性能随着溶胶浓度和热处理温度的升高而增加.与原始炭纤维相比,具有300nm涂层厚度的炭纤维起始氧化温度提高了200℃.但是当涂层超过一定厚度时,涂层开裂脱落,炭纤维的抗氧化性能降低.SiC/SiO2涂层炭纤维的拉伸强度与原始纤维相比降低了37.7%,在700℃等温氧化90 min,涂层纤维的拉伸强度为1.37 GPa,仍保留一定的强度.

参考文献

[1] Arshad Hussain Wazir,Lutfullah Kakakhe.沥青基炭纤维的制备及其表征[J].新型炭材料,2009(01):83-88.
[2] Wang YQ.;Wang ZM.;Zhou BL. .OXIDATION PROTECTION OF CARBON FIBERS BY COATINGS[J].Carbon: An International Journal Sponsored by the American Carbon Society,1995(4):427-433.
[3] 冉丽萍,易茂中,蒋建献,葛毅成.炭/炭复合材料MoSi2/SiC高温抗氧化复合涂层的制备及其结构[J].新型炭材料,2006(03):231-236.
[4] L. A. Tkachenko;A. Yu. Shaulov;A. A. Berlin .High-Temperature Protective Coatings for Carbon Fibers[J].Inorganic materials,2012(3):213-221.
[5] Armin Feldhoff;Eckhard Pippel;Jorg Woltersdorf .Interface engineering of carbon-fiber reinforced Mg-Al alloys[J].Advanced Engineering Materials,2000(8):471-480.
[6] Baklanova NI;Zima TM;Boronin AI;Kosheev SV;Titov AT;Isaeva NV;Graschenkov DV;Solntsev SS .Protective ceramic multilayer coatings for carbon fibers[J].Surface & Coatings Technology,2006(6):2313-2319.
[7] Hackl G;Gerhard H;Popovska N .Coating of carbon short fibers with thin ceramic layers by chemical vapor deposition[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2006(1/2):217-222.
[8] Jun-Sheng Li;Chang-Rui Zhang;Bin Li .Preparation and characterization of boron nitride coatings on carbon fibers from borazine by chemical vapor deposition[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2011(17):7752-7757.
[9] Kern F.;Gadow R. .Liquid phase coating process for protective ceramic layers on carbon fibers[J].Surface & Coatings Technology,2002(0):418-423.
[10] Baklanova, N;Zhilitskaya, L;Titov, A .Organometallic polymer-derived interfacial coatings on carbon and SiC fibers[J].Progress in Organic Coatings,2009(2/3):216-220.
[11] P. Peng;X.D. Li;G.F. Yuan .Aluminum oxide/amorphous carbon coatings on carbon fibers, prepared by pyrolysis of an organic-inorganic hybrid precursor[J].Materials Letters,2001(3):171-177.
[12] Bo-Hye Kim;Chang Hyo Kim;Kap Seung Yang;Ki-Young Kim;Young-Jun Lee .SiC/SiO_2 coating for improving the oxidation resistive property of carbon nanofiber[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2010(5):1607-1611.
[13] Hasegawa Y;Iimura M;Yajima S .Synthesis of continuous silicon-carbide fiber.2.conversion of polycarbosilane fiber into silicon-carbide fibers[J].Journal of Materials Science,1980,15(03):720-728.
[14] Chomel, AD;Dempsey, P;Latournerie, J;Hourlier-Bahloul, D;Jayasooriya, UA .Gel to glass transformation of methyltriethoxysilane: A silicon oxycarbide glass precursor investigated using vibrational spectroscopy[J].Chemistry of Materials,2005(17):4468-4473.
[15] Olejniczak Z;Leczka M;Cholewa-Kowalska K;Wojtach K;Rokita M;Mozgawa W .Si-29 MAS NMR and FTIR study of inorganic-organic hybrid gels[J].Journal of Molecular Structure,2005(0):465-471.
[16] N.Takamura;K.Taguchi;T.Gunji .Preparation of Silicon Oxycarbide Ceramic Films by Pyrolysis of Polymethyl-and Polyvinylsilsesquioxanes[J].Journal of Sol-Gel Science and Technology,1999(3):227-234.
[17] Gian Domenico Soraru;Stefano Modena;Emanuel Guadagnino .Chemical Durability of Silicon Oxycarbide Glasses[J].Journal of the American Ceramic Society,2002(6):1529-1536.
[18] Xiaofei Wang;Cairong Gong;Guoliang Fan .Preparation and mechanical properties of silicon oxycarbide fibers from electrospinning/sol-gel process[J].Materials Research Bulletin,2011(12):2398-2402.
[19] Corriu R J P;Leclercq D;Mutin P H et al.Preparation and structure of silicon oxycarbide glasses derived from polysiloxane precursors[J].Journal of Sol-Gel Science and Technology,1997,8(1-3):327-330.
[20] Soraru GD.;Campostrini R.;Babonneau F.;Mariotto G.;Dandrea G. .STRUCTURAL CHARACTERIZATION AND HIGH-TEMPERATURE BEHAVIOR OF SILICON OXYCARBIDE CLASSES PREPARED FROM SOL-GEL PRECURSORS CONTAINING SI-H BONDS[J].Journal of the American Ceramic Society,1995(2):379-387.
[21] R. Gadiou;S. Serverin;P. Gibot .The synthesis of SiC and TiC protective coatings for carbon fibers by the reactive replica process[J].Journal of the European Ceramic Society,2008(11):2265-2274.
[22] 王浩静,王红飞,李东风,朱星明,贺福,王心葵.石墨化温度对炭纤维微观结构及其力学性能的影响[J].新型炭材料,2005(02):157-163.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%