Al/Mg alloy multilayered composites were produced successfully at the lower temperature (280℃) by accumulative roll bonding (ARB) processing technique. The microstructures of Al and Mg alloy layers were characterized by scanning electron microscopy and transmission electron microscopy.Vickers hardness and three-point bending tests were conducted to investigate mechanical properties of the composites. It is found that Vickers hardness, bending strength and stiffness modulus of the Al/Mg alloy multilayered composite increase with increasing the ARB pass. Delamination and crack propagation along the interface are the two main failure modes of the multilayered composite subjected to bending load. Strengthening and fracture mechanisms of the composite are analyzed.
参考文献
| [1] | F.H.Kavarana;K.S.Ravichandran .NANOSCALE STEEL-BRASS MULTILAYER LAMINATES MADE BY COLD ROLLING: MICROSTRUCTURE AND TENSILE PROPERTIES[J].Scripta materialia,2000(10):947-954. |
| [2] | A. Misra;J. P. Hirth;R. G. Hoagland .Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites[J].Acta materialia,2005(18):4817-4824. |
| [3] | P.J. Hsieh;Y.P. Hung;J.C. Huang .Transformation into nanocrystalline or amorphous materials in Zr-X binary systems using ARB route[J].Scripta materialia,2003(2):173-178. |
| [4] | J. McKeown;A. Misra;H. Kung .Microstructures and strength of nanoscale Cu-Ag multilayers[J].Scripta materialia,2002(8):593-598. |
| [5] | M.C. Chen;H.C. Hsieh;W. Wu .The evolution of microstructures and mechanical properties during accumulative roll bonding of Al/Mg composite[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2006(1/2):169-172. |
| [6] | M. Eizadjou;A. Kazemi Talachi;H. Danesh Manesh;H. Shakur Shahabi;K. Janghorban .Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process[J].Composites science and technology,2008(9):2003-2009. |
| [7] | M.Z. Quadir;M. Ferry;O. Al-Buhamad .Shear banding and recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding[J].Acta materialia,2009(1):29-40. |
| [8] | S. Ohsaki;S. Kato;N. Tsuji .Bulk mechanical alloying of Cu-Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process[J].Acta materialia,2007(8):2885-2895. |
| [9] | C F. FENG;L.FROYEN .IN-SITU P/M Al/(ZrB2+Al2O3) MMCs: PROCESSING, MICROSTRUCTURE AND MECHANICAL CHARACTERIZATION[J].Acta materialia,1999(18):4571-4584. |
| [10] | V.L. Tagarielli;N.A. Fleck;V.S. Deshpande .Collapse of clamped and simply supported composite sandwich beams in three-point bending[J].Composites, Part B. Engineering,2004(6/8):523-534. |
| [11] | Y.P. Li;G.P. Zhang;W. Wang;J. Tan;S.J. Zhu .On interface strengthening ability in metallic multilayers[J].Scripta materialia,2007(2):117-120. |
| [12] | M. Pozuelo;F. Carreno;O.A. Ruano .Delamination effect on the impact toughness of an ultrahigh carbon-mild steel laminate composite[J].Composites science and technology,2006(15):2671-2676. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%