采用水冷铜模法和水淬法制备得到Mg<,65+x>(Cu<,0.66>Y<,0.34>)<,30-x>Zn<,5>(x=5,10,15)非晶及其复合材料.并通过xRD、SEM对材料结构进行表征,研究Mg含量和冷却速度对样品微观结构的影响.结果表明:由水冷铜模法得到的x=5样品为单一非晶,x=10和15样品是由非晶相与Mg固溶体相组成的非晶复合材料.而利用冷速较低的水淬法得到的样品为非晶复合材料,其主要由Mg,Mg<,2>Cu,MgZnY和非晶相组成.通过研究合金在NaCl中性溶液中的腐蚀行为,发现随着Mg含量的增加,样品的耐腐蚀性能有所下降.并且对于同成分的合金,由冷速较快的水冷铜模法得到的样品耐蚀性相对较好.
参考文献
[1] | Kang H G;Park E S;Kim W T et al.[J].Materials Transactions-Japan Institute of Metals,2000,41:846. |
[2] | Amiya K;Inoue A .[J].Materials Transactions-Japan Institute of Metals,2000,41:1460. |
[3] | Amiya K;Inoue A .[J].Materials Transactions-Japan Institute of Metals,2001,42:543. |
[4] | Park ES.;Kim WT.;Kim DH.;Kang HG. .The effect of Ag addition on the glass-forming ability of Mg-Cu-Y metallic glass alloys[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2001(2/3):154-160. |
[5] | Men H;Hu Z Q;Xu J et al.[J].Scripta Materialia,2002,46:699. |
[6] | Ma H.;Ma E.;Xu J. .A new Mg65Cu7.5Ni7.5Zn5Ag5Y10 bulk metallic glass with strong glass-forming ability[J].Journal of Materials Research,2003(10):2288-2291. |
[7] | Men H;Kim W T;Kim D H et al.[J].Materials Transactions-Japan Institute of Metals,2003,44:2141. |
[8] | Ma H;Shi L L;Xu J et al.[J].Applied Physics Letters,2005,87:181915. |
[9] | Zheng Q;Cheng S;Strader J H et al.[J].Scripta Materialia,2007,56:161. |
[10] | Hui X;Dang W;Chen G L et al.[J].Acta Materialia,2007,55:907. |
[11] | 李国强,郑立静,李焕喜.Mg65Cu25Gd10非晶合金的腐蚀行为[J].稀有金属材料与工程,2009(01):110-114. |
[12] | Gebert A;Buchholz K;Leonhard A et al.[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1999,267(02):294. |
[13] | Gebert A;Mummert K;Eckert J et al.[J].Materials and Corrosion,1997,48(05):293. |
[14] | Gebert A.;John A.;Eckert J.;Schultz L.;Wolff U. .Stability of the bulk glass-forming Mg65Y10Cu25 alloy in aqueous electrolytes[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):125-135. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%