研究了1.3%Si无取向硅钢双辊连铸薄带和热轧板坯在冷轧退火过程中组织、织构和磁性能演化的特点。结果表明：铸带组织和热轧板坯初始组织的明显差异影响了冷轧退火再结晶组织和织构的演化。在相同冷轧和退火条件下,铸带试样再结晶晶粒比例较后者热轧板坯低试样,但是晶粒尺寸较大,而且Cube和Goss等有利织构组分比例高于热轧板坯试样,有害的γ组分较弱,这使得铸带试样具有较高的磁感和较低的铁损。
Evolution of recrystallized texture, microstructure and magnetic properties in a 1.3% Si non-oriented electrical steel processed by both twin-roll casting strip and hot-rolling were investigated. The results show that the differences of the initial microstructure determined by the two forming processes have significantly effects on microstructure and texture in the annealed state. Under the same cold rolling and annealing condition,compared with the hot-rolled specimen, the twin-roll casting strip specimen has lower recrystallized fraction, coarse grain size, stronger Goss and Cube fiber and weaker γ-fiber,which result in a higher magnetic induction and lower core loss.
参考文献
| [1] | 何忠治.电工钢[M].北京:冶金工业出版社,1996:41-120. |
| [2] | da Cunha MA;Paolinelli SD .Low core loss non-oriented silicon steels[J].Journal of Magnetism and Magnetic Materials,2008(20):2485-2489. |
| [3] | Taisei Nakayama;Noriyuki Honjou .Effect of aluminum and nitrogen on the magnetic properties of non-oriented semi-processed electrical steel sheet[J].Journal of Magnetism and Magnetic Materials,2000(1/2):87-94. |
| [4] | Hou C K .Effect of silicon on the loss separation and permeability of laminated steels[J].Journal of Magnetism and Magnetic Materials,1996,162(2-3):280-290. |
| [5] | Cunha M A;Paolinelli S C .Effect of hot temperature on the structure and magnetic properties of high permeability non-oriented silicon steel[J].Steel Research International,2005,76(06):421-425. |
| [6] | PremKumar R.;Samajdar I.;Viswanathan NN.;Singal V.;Seshadri V. .Relative effect(s) of texture and grain size on magnetic properties in a low silicon non-grain oriented electrical steel[J].Journal of Magnetism and Magnetic Materials,2003(1):75-85. |
| [7] | Wechsler R .The status of twin roll casting technology[J].Scandinavian Journal of Metallurgy,2003,32(01):58-63. |
| [8] | Haitao Liu;Zhenyu Liu;Chenggang Li .Solidification structure and crystallographic texture of strip casting 3 wt.% Si non-oriented silicon steel[J].Materials Characterization,2011(5):463-468. |
| [9] | Park, JT;Szpunar, JA .Effect of initial grain size on texture evolution and magnetic properties in nonoriented electrical steels[J].Journal of Magnetism and Magnetic Materials,2009(13):1928-1932. |
| [10] | Jongtae Park;Jerzy A. Szpunar;Kyuseok Han .Effect of Initial Grain Size Prior to Cold Rolling on Annealing Texture in Non-Oriented Electrical Steel[J].Materials Science Forum,2002(Pt.2):1257-1262. |
| [11] | Jong-Tae Park;Jerzy A. Szpunar .Evolution of recrystallization texture in nonoriented electrical steels[J].Acta materialia,2003(11):3037-3051. |
| [12] | Haratani T;Hutchinson B;Dillamore I L.Contribution of shear banding to origin Goss texture in silicon iron[J].Metal Science Journal,1984(02):57-65. |
| [13] | U shioda K;Hutchinson W B .Role of shear bands in annealing texture formation in 3% Si-Fe ( 111 ) [ 112 ] single crystals[J].ISIJ International,1989,29(11):862-867. |
| [14] | Paolinelli S C;Cunha M A;Cotab A B .The influence of shear bands on final structure and magnetic properties of 3% Si non-oriented silicon steel[J].Journal of Magnetism and Magnetic Materials,2008,320:641-644. |
| [15] | Jong-Tae PARK;Jerzy A. SZPUNAR;Sang-Yun CHA .Effect of Heating Rate on the Development of Annealing Texture in Nonoriented Electrical Steels[J].ISIJ International,2003(10):1611-1614. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%