To reduce defects, such as the shrinkage cavity and the surface cracks caused by non-homogeneous metal flow in extrusion process, an extrusion method was proposed by using a die with the guiding angle. Numerical simulation and experiment were conducted to investigate the metal flow in this extrusion process. It is shown that the stress state at the bottom of the die is changed. The tendency to generate the dead zone is decreased by employing the guiding angle at the die entrance. The shrinkage cavity is reduced because the non-homogeneous metal flow at the final stage of extrusion is improved. The axial stress is decreased greatly so that the surface cracks caused by additional stress are avoided.
参考文献
| [1] | L. Li;J. Zhou;J. Duszczyk .Prediction of temperature evolution during the extrusion of 7075 aluminium alloy at various ram speeds by means of 3D FEM simulation[J].Journal of Materials Processing Technology,2004(3):360-370. |
| [2] | Shijian YUAN;Feng LI;Gang LIU .[J].Acta Metallurgica Sinica,2007,43(02):1909. |
| [3] | P Ulysse .[J].International Journal of Mechanical Sciences,2002,44(02):319. |
| [4] | Q. Li;C.J. Smith;C. Harris .Finite element modelling investigations upon the influence of pocket die designs on metal flow in aluminium extrusion Part II. Effect of pocket geometry configurations on metal flow[J].Journal of Materials Processing Technology,2003(2/3):197-203. |
| [5] | R. Narayanasamy;P. Srinivasan;R. Venkatesan .Computer aided design and manufacture of streamlined extrusion dies[J].Journal of Materials Processing Technology,2003(1/3):262-264. |
| [6] | Q. Li;C.J. Smith;C. Harris .Finite element investigations upon the influence of pocket die designs on metal flow in aluminium extrusion/Part I. Effect of pocket angle and volume on metal flow[J].Journal of Materials Processing Technology,2003(2/3):189-196. |
| [7] | S.W. Chung;W.J. Kim;K. Higashi .The effect of die geometry on the double shear extrusion by parametric FVM simulation[J].Scripta materialia,2004(11):1117-1122. |
| [8] | P Ulysse;R E Johnson .[J].International Journal of Mechanical Sciences,1999,41(09):1067. |
| [9] | Feng LI;Shijian YUAN;Gang LIU .[J].Journal of Aeronautical Materials,2006,26(03):83. |
| [10] | S. Z. Qamar;A. F. M. Arif;A. K. Sheikh .A new definition of shape complexity for metal extrusion[J].Journal of Materials Processing Technology,2004(0):1734-1739. |
| [11] | B V Mehta;I Al-Zkeri;J S Gunasekera;A Buijk .[J].Journal of Materials Processing Technology,2001,113(1-3):93. |
| [12] | H R Darani;M Ketabchi .[J].Materials & Design,2004,25(06):535. |
| [13] | L Zou;J C Xia;X Y Wang;G A Hu .[J].Journal of Materials Processing Technology,2003,142(03):659. |
| [14] | M. Bakhshi-Jooybari .A theoretical and experimental study of friction in metal forming by the use of the forward extrusion process[J].Journal of Materials Processing Technology,2002(0):369-374. |
| [15] | H R Darani;M Ketabchi .[J].Materials & Design,2004,25(06):535. |
| [16] | R. Ponalagusamy;R. Narayanasamy;P. Srinivasan .Design and development of streamlined extrusion dies a Bezier curve approach[J].Journal of Materials Processing Technology,2005(3):375-380. |
| [17] | A M Arif .[J].Finite Elements in Analysis and Design,2003,39(10):1007. |
| [18] | Feng LI;Shijian YUAN;Zhubin HE .[J].Materials Science and Technology,2007,15(i):15. |
| [19] | Lian Zhou .[J].Journal of Plasticity Engineering,2006,13(02):67. |
| [20] | 闫洪,夏巨谌,李志刚,董湘怀,杨国泰,何成宏.工艺参数对铝型材挤压变形规律的影响[J].中国有色金属学报,2002(06):1154-1161. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%