欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. 丁腈橡胶增韧改性环氧树脂的研究进展

材料导报, 2009, 23(17): 67-70.

丁腈橡胶增韧改性环氧树脂的研究进展

杨国栋 1, , 朱世根 2, , 李山山 3, , 杨占峰 4,

1.东华大学材料科学与工程学院,上海,201620

2.东华大学材料科学与工程学院,上海,201620;东华大学机械工程学院,上海,201620

3.东华大学材料科学与工程学院,上海,201620

4.东华大学材料科学与工程学院,上海,201620

基金项目:   上海市重点学科建设项目(B602)  

关键词： 丁腈橡胶 , 环氧树脂 , 增韧机理 , 进展

Progress in Research on Toughening Epoxy Resin Using Nitrile Rubbers

综述了丁腈橡胶增韧改性环氧树脂的研究现状及发展过程,讨论了不同活性端基的丁腈橡胶时环氧树脂性能的影响,评述了银纹、橡胶颗粒的拉伸撕裂和孔洞剪切屈服3种增韧机理,分析了目前丁腈橡胶增韧改性环氧树脂存在的问题,并展望了其发展方向.

参考文献

[1] Liu WB;Qiu QH;Wang J;Huo ZC;Sun H .Curing kinetics and properties of epoxy resin-fluorenyl diamine systems[J].Polymer: The International Journal for the Science and Technology of Polymers,2008(20):4399-4405.
[2] Pearce PJ.;Ennis BC.;Morris CEM. .RUBBER TOUGHENING OF PRACTICAL TETRAGLYCIDYL METHYLENEDIANILINE PIPERIDINE ADDUCT SYSTEMS[J].Polymer: The International Journal for the Science and Technology of Polymers,1996(7):1137-1150.
[3] R. J. Day;P. A. Lovell;A. A. Wazzan .Toughened carbon/epoxy composites made by using core/shell particles[J].Composites science and technology,2001(1):41-56.
[4] L. Calabrese;A. Valenza .The effect of a liquid CTBN rubber modifier on the thermo-kinetic parameters of an epoxy resin during a pultrusion process[J].Composites science and technology,2003(6):851-860.
[5] Thomas R;Durix S;Sinturel C;Omonov T;Goossens S;Groeninckx G;Moldenaers P;Thomas S .Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin - Effects of a liquid rubber inclusion[J].Polymer: The International Journal for the Science and Technology of Polymers,2007(6):1695-1710.
[6] Calabrese L.;Valenza A. .Effect of CTBN rubber inclusions on the curing kinetic of DGEBA-DGEBF epoxy resin[J].European Polymer Journal,2003(7):1355-1363.
[7] Gouri C;Rarnaswamy R;Ninan K N .Studies on the adhesive properties of solid elastomer-modified novolac epoxy resin[J].International Journal of Adhesion and Adhesives,2000,20(04):305.
[8] Maazouz A;Sautereau H .Gerard J K Toughening of epoxy networks using preformed core-shell particles or reactive rubbers[J].Polymer Bulletin,1994,33(01):67.
[9] Bobby Russell;Richard Chartoff .The influence of cure conditions on the morphology and phase distribution in a rubber-modified epoxy resin using scanning electron microscopy and atomic force microscopy[J].Polymer: The International Journal for the Science and Technology of Polymers,2005(3):785-798.
[10] Mitsukazu Ochi;Takahide Morishita;Shinobu Kokufu;Miyuki Harada .Network chain orientation in the toughening process of the elastomer modified mesogenic epoxy resin[J].Polymer: The International Journal for the Science and Technology of Polymers,2001(24):9687-9695.
[11] D.Ratna .Phase separation in liquid rubber modified epoxy mixture. Relationship between curing conditions, morphology and ultimate behavior[J].Polymer: The International Journal for the Science and Technology of Polymers,2001(9):4209-4218.
[12] Ramos VD;da Costa HM;Soares VLP;Nascimento RSV .Hybrid composites of epoxy resin modified with carboxyl terminated butadiene acrilonitrile copolymer and fly ash microspheres[J].Polymer Testing,2005(2):219-226.
[13] Tripathi G;Srivastava D .Effect of carboxyl-terminated poly (butadiene-co-acrylonitrile) (CTBN) concentration on thermal and mechanical properties of binary blends of diglycidyl ether of bisphenol-A (DGEBA) epoxy resin[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):262-269.
[14] J.M. Morancho;J.M. Salla .Relaxation in partially cured samples of an epoxy resin and of the same resin modified with a carboxyl-terminated rubber[J].Polymer: The International Journal for the Science and Technology of Polymers,1999(10):2821-2828.
[15] Morancho JM.;Salla JM. .Relaxation in a neat epoxy resin and in the same resin modified with a carboxyl-terminated copolymer[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,1998(0):596-599.
[16] Apicella A;Nicolais L;Astarita G et al.Hygrotherrnal history dependence of equilibrium moisture sorption in epoxy resins[J].Polymer,1981,22(08):1064.
[17] Browning C E .The mechanisms of elevated temperature property losses in high performance structural epoxy resin matrix materials after exposures to high humidity environments[J].Polymer Engineering & Science,1978,18(01):16.
[18] Iain McEwan;Richard A. Pethrick;Stephen J. Shaw .Water absorption in a rubber-modified epoxy resin; carboxy terminated butadiene acrylonitrile-amine cured epoxy resin system[J].Polymer: The International Journal for the Science and Technology of Polymers,1999(15):4213-4222.
[19] Ramos VD;da Costa HM;Soares VLP;Nascimento RSV .Modification of epoxy resin: a comparison of different types of elastomer[J].Polymer Testing,2005(3):387-394.
[20] Zeng Minfeng;Sun Xudong;Xiao Huiquan .Investigation of free volume and the interfacial,and toughening behavior for epoxy resin/rubber composites by positron annihilation[J].Radiation Physics and Chemistry,2008(3):245-251.
[21] Wise C.W. .CTBN rubber phase precipitation in model epoxy resins[J].Polymer: The International Journal for the Science and Technology of Polymers,2000(12):4625-4633.
[22] Frigione M E;Mascia L;Acierno D .Oligomeric and polymeric modifiers for toughening of epoxy resins[J].European Polymer Journal,1995,31(11):1021.
[23] Kunz S C et al.Morphology and toughness characterization of epoxy resins modified with amine and carboxyl terminated rubbers[J].POLYMER,1982,23(13):1897.
[24] Yamanaka K;Takagi Y;Inoue T .Reaction-induced phase separation in rubber-modified epoxy resins[J].Polymer,1989,30(10):1839.
[25] Butta E;Levita G;Marchetti A et al.Morphology and mechanical properties of amine-terminated butadiene-acrylonitrile/epoxy blends[J].Polymer Engineering and Science,1986,26(01):63.
[26] Chikhi N.;Fellahi S.;Bakar M. .Modification of epoxy resin using reactive liquid (ATBN) rubber[J].European Polymer Journal,2002(2):251-264.
[27] Verchere D et al.Rubber-modified epoxies.Ⅰ.Influence of carboxyl-terminated butadiene-acrylonitrile random copoly mers (CTBN) on the polymerization and phase separation processes[J].Journal of Applied Polymer Science,1990,41(3-4):467.
[28] Verchere D;Pascault J P;Sautereau H et al.Rubber-modified epoxies.Ⅳ.Influence of morphology on mechanical properties[J].Journal of Applied Polymer Science,1991,43(02):293.
[29] Moschiar S M et al.Rubber-modified epoxies.Ⅲ.Analysis of experimental trends through a phase separation model[J].Journal of Applied Polymer Science,1991,42(03):717.
[30] M.L.Auad;P.M.Frontini;J.Borrajo;M.I.Aranguren .Liquid rubber modified vinyl ester resins: fracture and mechanical behavior[J].Polymer: The International Journal for the Science and Technology of Polymers,2001(8):3723-3730.
[31] O. Gryshchuk;N. Jost;J. Karger-Kocsis .Toughening of vinylester-urethane hybrid resins by functional liquid nitrile rubbers and hyperbranched polymers[J].Polymer: The International Journal for the Science and Technology of Polymers,2002(17):4763-4768.
[32] E.J.Robinette;S.Ziaee;G.R.Palmese .Toughening of vinyl ester resin using butadiene-acrylonitrile rubber modifiers[J].Polymer: The International Journal for the Science and Technology of Polymers,2004(18):6143-6154.
[33] Bucknall C B;Smith R R .Stress-whitening in high-impact polystyrenes[J].Polymer,1966,6(08):437.
[34] Kuns-Douglass S;Beaumont P W R;Ashby M F .A model for the toughness of epoxy-rubber particulate composites[J].Journal of Materials Science,1980,15(05):1109.
[35] Bascom W D;Cottington R L;Jones R L et al.The fracture of epoxy-and elastomer-modified epoxy polymers in bulk and as adhesives[J].Journal of Applied Polymer Science,1975,19(09):2545.
[36] Baseom W D;Ting R Y;Moulton R J et al.The fracture of an epoxy polymer containing elastomeric modifiers[J].Journal of Materials Science,1981,16(10):2657.
[37] Kinloch A J;Shaw S J et al.Deformation and fracture behaviour of a rubber-toughened epoxy:1.Mierostrueture and fracture studies[J].Polymer,1983,24(10):1341.
[38] Kinloch A J;Shaw S J;Hunston D L .Deformation and fracture behaviour of a rubber-toughened epoxy:2.Failure criteria[J].Polymer,1983,24(10):1355.
[39] Pearson R A;Yee A F .Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies[J].Journal of Materials Science,1991,26(14):3828.
[40] Donald A M;Kramer E J .The competition between shear deformation and crazing in glassy polymers[J].Journal of Materials Science,1982,17(07):1871.
[41] Szeluga U;Kurzeja L;Galina H .Dynamic mechanical properties of epoxy/novolac system modified with reactive liquid rubber and carbon filler[J].Journal of thermal analysis and calorimetry,2008(3):813-820.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net