Al<,2>O<,3>-TiC/Ti(C,N)系陶瓷复合材料具有广阔的应用前景,但综合性能还有待进一步改善.分析讨论了TiC/Ti(C,N)主要成分含量对组织性能的影响,综述了Cr<,2>O<,3>、Y<,2>O<,3>、ZrO<,2>等化合物添加物和Fe、Al、Co、Ni、Mo等金属添加物对Al<,2>O<,3>-TiC/Ti(C,N)系陶瓷复合材料中组织和性能影响的研究结果,并比较分析了其各自的特点.
参考文献
| [1] | 蔡克峰;南策文;袁润章.Al2O《,3》-TiC复合陶瓷的研究进展[J].材料导报,1995(01):45. |
| [2] | Inoue M;Otsu H;Kominami H et al.Glyeothermal synthesis rare earth aluminium gamets[J].Journal of Alloys and Compounds,1995,226:146. |
| [3] | Davis J.B.;Marshall D.B. .Ceramic composites for thermal protection systems[J].Composites, Part A. Applied science and manufacturing,1999(4):483-488. |
| [4] | Baldacim S A;Santos C;Silva O M et al.Cermies composites Si《,3》N《,4》-SiC(w) containing rare earth concentrate (CRE) as sintering adis[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,367:312. |
| [5] | Terao R;Tatami J;Meguro T et al.Fracture behavior of AIN ceramics with rare earth oxides[J].Journal of the European Ceramic Society,2002,22:1051. |
| [6] | Santos C;Strecker K;Baldacim S A et al.Mechanical properties improvement related to the isothermal holding time in Si《,3》N《,4》 ceramics sintered with an alternative additive[J].International Journal of Refractory Metals and Hard Materials,2003,21:245. |
| [7] | Uhlmann D R;Boulton J M;Teowee G .New optical materials by wet chemical processing[J].Journal of Non-Crystalline Solids,1996,196:2. |
| [8] | 任萍萍,刘宁,许育东,陈名海.TiC/TiN/Al2O3复合陶瓷的研究进展[J].合肥工业大学学报(自然科学版),2004(01):75-79. |
| [9] | Cai K F;Melaehlan D S;Axen N et al.Preparation,microstructures and properties of Al2O《,3》-TiC composites[J].Ceramics International,2002,28:217. |
| [10] | Wabi R P;Ilsehner B .Fracture behavior of composites based on Al2O《,3》-TiC[J].Journal of Materials Science,1980,15(04):877. |
| [11] | Guo S Y;Li J;Mao D S.Friction-wear behavior of Al2O《,3》-TiC-Co advanced ceramic during in-situ SEM[J].WEAR,1997(203-204):319. |
| [12] | Gong J H;Miao H Z;Zhao Z et al.Effect of TiC paticle size on the toughness characteristics of Al2O《,3》-TiC composites[J].Materials Letters,2001,49:235. |
| [13] | Goto Y;Porz F .Mechanical properties of unidireetionally oriented SiCw whisker-reinforced Si《,3》N《,4》 fabricated by extrusion and hot-pressing[J].Journal of the American Ceramic Society,1993,76(06):1420. |
| [14] | Rak Z S;Czechowski J.Manufacture and properties of Al2O《,3》-TiN particulate composites[J].Key Engineering Materials,1997(132-316):2048. |
| [15] | 李景国,高濂,郭景坤.原位氮化法制备纳米TiN-Al2O3复合粉体[J].无机材料学报,2002(03):437-442. |
| [16] | 朱流,郦剑,李军,姚继鹏.热压烧结工艺对超韧Al2O3-TiC-Co复合陶瓷性能的影响[J].材料热处理学报,2007(05):20-24. |
| [17] | Rui-xia Shi;Jia Li;Dong-zhi Wang;Yan-sheng Yin .Mechanical Properties and Thermal Shock Resistance of Al_2O_3-TiC-Co Composites[J].Journal of Materials Engineering and Performance,2009(4):414-419. |
| [18] | 邢国红,王志,张雷,丁寅森.Ni对MF/Al2O3复合材料力学性能的影响[J].济南大学学报（自然科学版）,2010(03):251-254. |
| [19] | 李合琴,何晓雄,曹闰,秦晓英.纳米Ni-20Fe颗粒增韧Al2O3复合材料的力学性能与磁性能[J].复合材料学报,2006(03):103-107. |
| [20] | 何林,黄传真,刘玉先,孙静,刘含莲.Ti（C,N）基金属陶瓷的力学性能与显微结构的研究[J].硅酸盐学报,2003(03):324-328. |
| [21] | 国外硬质合金编辑部.国外硬质合金[M].北京:冶金工业出版社,1976:344. |
| [22] | 郑勇 等.Mo含量对TiCN基金属陶瓷性能的影响[J].硬质合金,1993,10(02):65. |
| [23] | 张卫方;韩杰才;郝晓东 等.自蔓延高温合成TiC-Al2O《,3》-Fe系金属陶瓷的致密化研究[J].材料科学与工艺,1998,6(04):30. |
| [24] | 张金玲,崔洪芝,张文静.Fe含量对燃烧合成TiB2-Al2O3复相陶瓷组织与性能的影响[J].热加工工艺,2006(16):1-3,6. |
| [25] | 张卫方,陶春虎,习年生,韩杰才,杜善义.TiC-Al2O3-Fe复合材料的微观组织研究[J].无机材料学报,2001(01):173-177. |
| [26] | 张化宇,韩杰才,张卫方,杜善义.TiC-Al2O3-Fe金属陶瓷的自蔓延高温合成研究[J].材料工程,1999(05):23-26. |
| [27] | 张卫方;韩杰才;陈贵清 等.Fe含量对自蔓延高温合成TiC-Al2O《,3》-Fe复合材料的影响[J].中国有色金属学报,1999,9(01):178. |
| [28] | 杨波;张二林;曾松岩 等.SHS快速加压合成TiC,Al2O《,3》/Al复合材料的工艺研究[J].材料科学与工艺,1999,7(01):56. |
| [29] | 胡明,张继堂,郑小红,陈秋华.工艺参数对原位自生Al2O3-TiCP/Al复合材料组织结构的影响[J].宇航材料工艺,2008(03):76-80. |
| [30] | Hu Qiaodan;Luo Peng;Yan Youwei .Microstructures,densification and mechanical properties of TiC-Al2O《,3》-Al cornposite by field-activated combustion synthesis[J].Materials Science and Engineering,2008,215-221:486. |
| [31] | 尹龙卫;李凤照;刘援朝 .Y-TZP增韧Al2O《,3》-TiC陶瓷复合材料的研究[J].机械工程材料,1997,21(06):35. |
| [32] | 孝煦,许崇海,赵诗奎.ZrO2含量对Al2O3/Ti（C,N）/ZrO2纳微米复合陶瓷工模具材料力学性能和微观结构的影响[J].山东陶瓷,2009(02):3-6. |
| [33] | 董倩,唐清,李文超.燃烧合成-热压制备A12O3-Tic-ZrO2纳米复合陶瓷的力学性能与显微结构[J].金属学报,2001(12):1285-1288. |
| [34] | 曾照强,胡晓清,林旭平,苗赫濯.添加Cr2O3对Al2O3-TiC陶瓷烧结及纳米结构形成的影响[J].硅酸盐学报,1998(02):178-181. |
| [35] | Watanabe T;Shoubu R;Egorov F .Interphase interaction in material of TiC-C and TiC-Cr2O《,3》 system[J].Solid State Phenomena,1989,8:383. |
| [36] | 孙德明,刘立红,许崇海,刘玉婷,鹿晓阳,赵国群.Al2 O3/Cr3C2/（W,Ti）C陶瓷抗弯强度的研究[J].机械工程材料,2005(08):43-45. |
| [37] | 许崇海,黄传真.钇对陶瓷刀具材料Al2O3/TiCN的强韧化效应[J].中国稀土学报,1999(01):24. |
| [38] | 李喜坤,邱关明,丘泰,赵海涛,白华,孙旭东.热压烧结制备Al2O3/TiCN-0.2%Y2O3复合材料[J].中国稀土学报,2006(06):705-709. |
| [39] | 许崇海,孙德明.模具用Ti（C,N）/Al2O3陶瓷材料的微观结构与力学性能[J].粉末冶金技术,2005(04):243-247. |
| [40] | 许崇海,慈国庆,商锡佐.稀土强化Al2O3/Ti（C,N）陶瓷材料的组分设计及其使用性能研究[J].人工晶体学报,2007(02):400-404. |
| [41] | 徐兴宪.稀土[M].北京:冶金工业出版社,1995 |
| [42] | Liu Youming;Xu Bofan et al.The effeet rare earth CeO2 on microstructure and properties of in situ TiC/Al-Si composite[J].Materials Letters,2004,58:432. |
| [43] | 许伯藩,李安敏,潘应君,张细菊.CeO2对激光熔覆TiCp/Ni基复合涂层的影响[J].热加工工艺,2002(06):10-12. |
| [44] | 胡明,郑小红,张继堂.CeO2对原位自生Al2O3-TiCP/Al基复合材料组织结构的影响[J].佳木斯大学学报（自然科学版）,2007(05):618-621. |
| [45] | 耿在丹,张波.LaO2对Al2O3-TiCp/Al基复合材料组织结构的影响[J].河南广播电视大学学报,2008(03):109-110. |
| [46] | 刘宁,黄新民,周杰,田春艳,熊惟皓,张杰,崔昆.Er对Ti（C,N）基金属陶瓷结构和力学性能的影响[J].硅酸盐学报,2000(01):72-76. |
| [47] | 荆阳,庞思勤,张学恒,徐承俊.TiAlN-MoS2/TiAlN硬质润滑膜研究[J].北京理工大学学报,2002(04):457-459,468. |
| [48] | Fox V;Jones A;Renevier N M et al.Hard lubricating coatings for cutting and forming tools and mechanical components[J].Surface and Coatings Technology,2000,19(125):347. |
| [49] | Liu You-Rong;Du Zhi;Liu Jia-Jun .Cutting performance and wear mechanism of ceramic cutting tools with MoS_2 coating deposited by magnetron sputtering[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(2):285-292. |
| [50] | Carrapighano J M;Gomes J R;Silvar F .Tribological behaviour of Si《,3》N《,4》-BN ceramic materials for dry sliding applications[J].WEAR,2002,23(253):1070. |
| [51] | Burn R;Murray G T .Plasticity and dislocation etch pits in CaF2[J].Journal of the American Ceramic Society,1962,45:251. |
| [52] | 曹同坤,邓建新.添加固体润滑剂的Al2O3/TiC陶瓷材料力学性能和显微结构[J].材料科学与工艺,2006(01):5-8. |
| [53] | 韩杰才;韩荣第;吴忍畊 .Si《,3》N《,4》添加剂对Al2O《,3》/TiC的组织与性能的影响[J].硅酸盐通报,1990,9(02):57. |
| [54] | 韩荣第 .Al2O《,3》+TiC+Si《,3》N《,4》陶瓷刀具材料的切削性能试验[J].工具技术,1993,27(07):36. |
| [55] | 仝建峰,陈大明,陈宇航.纳米SiC-Al2O3/TiC多相陶瓷复合材料显微结构的研究[J].硅酸盐学报,2001(05):427-430. |
| [56] | 仝建峰,陈大明,陈宇航.纳米SiC对Al2O3/TiC基多相陶瓷材料显微结构的影响[J].硅酸盐通报,2002(04):8-11. |
| [57] | 黄政仁;谭寿洪;江东亮 .SiC晶须增强Al2O《,3》-TiC复相陶瓷的研究[J].硅酸盐学报,1993,21(04):349. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%