Grain refinement is one of the effective methods to develop new generation low carbon microalloyed steels possessing excellent combination of mechanical properties. The microstructural evolution and ferrite grain refinement at the de-formation temperature of 865℃, above Ar3, with different strain rates were investigated using single pass isothermal hot compression experiments for a low carbon Nb-Ti microalloyed steel. The physical processes that occurred during deformation were discussed by observing the optical microstructure and analyzing the true stress-true strain responses.At strain rates of 0.001 and 0.01 s-1, there is no evidence of work hardening behavior during hot deformation and strain-induced transformation (SIT) leads to dynamic flow softening in flow curves. Optical microscopy observation shows that ultrafine and equiaxed ferrite with grain sizes of 2μm can be obtained by applying deformation with strain rate of 0.1 s-1 due to SIT just after deformation. Furthermore, increasing the strain rate from 0.001 to 0.1 s-1reduces both the grain size of the equiaxed ferrite and the amount of deformed ferrite.
参考文献
| [1] | P. J. Hurley;P. D. Hodgson .Formation of ultra-fine ferrite in hot rolled strip: Potential mechanisms for grain refinement[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(2):206-214. |
| [2] | R Priestner;P D Hodgson .[J].Materials Science and Technology,1992,8:849. |
| [3] | L Sunghak;K Dongil;K L Young;K Ohjoon .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1995,26:1093. |
| [4] | P J Hurley;P D Hodgson;B C Muddle .[J].Scripta Materialia,1999,40:433. |
| [5] | R. Priestner;Y. M. Al-Horr;A. K. Ibraheem .Effect of strain on formation of ultrafine ferrite in surface of hot rolled microalloyed steel[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2002(9):973-980. |
| [6] | M. Niikura;M. Fujioka;Y. Adachi;A. Matsukura;T. Yokota;Y. Shirota;Y. Hagiwara .New concepts for ultra refinement of grain size in super metal project[J].Journal of Materials Processing Technology,2001(3):341-346. |
| [7] | P.D.Hodgson;M.R.Hickson .The production and mechanical properties of ultrafine ferrite[J].Materials Science Forum,1998(0):63-72. |
| [8] | B.EGHBALI;A. ABDOLLAH-ZADEH .The Influence of Thermomechanical Parameters in Ferrite Grain Refine-ment-in a Low Carbon Nb-Microalloyed Steel[J].Scripta materialia,2005(1):41-45. |
| [9] | M. R. Hickson;P. D. Hodgson .Effect of preroll quenching and post-roll quenching on production and properties of ultrafine ferrite in steel[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1999(1):85-90. |
| [10] | H Yada;Y Matsumura;I Tamura.Proc of Int Conf on Physical Metallurgy of Thermomechanical Processing of Steel and Other Materials[C].ISIJ Tokyo,1988:200. |
| [11] | P.D.Hodgson;M.R.Hickson;R.K.Gibbs .ULTRAFINE FERRITE IN LOW CARBON STEEL[J].Scripta materialia,1999(10):1179-1184. |
| [12] | J K Chio;D H Seo;J S Lee;K K Um,W Y Choo .[J].ISIJ International,2003,43:746. |
| [13] | D.B. Santos;R.K. Bruzszek;P.C.M. Rodrigues .Formation of ultra-fine ferrite microstructure in warm rolled and annealed C-Mn steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):189-195. |
| [14] | C.J. Huang;D.Z. Li;Y.Y. Li .A finite element analysis of strain induced transformation rolling and an experimental study on the grain refinement potential of severe undercooling thermo-mechanical treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):136-143. |
| [15] | B. Q. Han;S. Yue .Processing of ultrafine ferrite steels[J].Journal of Materials Processing Technology,2003(1/3):100-104. |
| [16] | Y.D. Huang;L. Froyen .Important factors to obtain homogeneous and ultrafine ferrite-pearlite microstructure in low carbon steel[J].Journal of Materials Processing Technology,2002(1/2):216-226. |
| [17] | G.L. KELLY;H. BELADI;P.D. HODGSON .Ultrafine Grained Ferrite Formed by Interrupted Hot Torsion Deformation of Plain Carbon Steel[J].ISIJ International,2002(12):1585-1590. |
| [18] | S C Hong;S H Lim;K J Lee;D H Shin,K S Lee .[J].ISIJ International,2003,43:394. |
| [19] | A. Ghosh;Samar Das;S. Chatterjee .Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):299-308. |
| [20] | S H Cho;K B Kang;J J Jonas .[J].ISIJ International,2001,41:63. |
| [21] | P. A. MANOHAR;D. P. DUNNE;T. CHANDRA;C. R. KILLMORE .Grain Growth Predictions in Microalloyed Steels[J].ISIJ International,1996(2):194-200. |
| [22] | S. F. MEDINA;J. E. MANCILLA .Influence of Alloying Elements in Solution on Static Recrystallization Kinetics of Hot Deformed Steels[J].ISIJ International,1996(8):1063-1069. |
| [23] | B Eghbali;A Abdollah-zadeh.[J].Mater Process Technol,2005 |
| [24] | Z Yang;R Wang .[J].ISIJ International,2003,43:761. |
| [25] | H.Yada;C.M.Li .Dynamic #gamma# -> #alpha# transformation during hot deformation in iron-nickel-carbon alloys[J].ISIJ International,2000(2):200-206. |
| [26] | M R Hickson;R K Gibbs;P D Hodgson .[J].ISIJ International,1999,39:1176. |
| [27] | P.J. HURLEY;B.C. MUDDLE;P.D. HODGSON .Nucleation Sites for Ultrafine Ferrite Produced by Deformation of Austenite During Single-Pass Strip Rolling[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(6):1507-1517. |
| [28] | L Du;C Zhang;H Ding;X Liu,G Wang .[J].ISIJ International,2002,42:1119. |
| [29] | D N Hanlon;J Sietsma;S van der Zwaag .[J].ISIJ International,2001,41:1028. |
| [30] | Y Adatchi;T Tomida;S Hinotani .[J].ISIJ International,2000,40:S194. |
| [31] | Y Weng .[J].ISIJ International,2003,43:1675. |
| [32] | P.A.Manohar .Continuous Cooling Transformation Behaviour of Microalloyed Steels Containing Ti, Nb, Mn and Mo[J].ISIJ International,1996(12):1486-1493. |
| [33] | X Liu;J K Solberg;R Gjengendal .[J].Materials Science and Technology,1996,12:345. |
| [34] | P J Hurley;B C Muddle;P D Hodgson .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2001,32:507. |
| [35] | D N Hanlon;J Sietsma;S van der Zwaag .[J].ISIJ International,2001,41:1028. |
| [36] | T A Kop;Y V Leeuwen;J Sietsma;S V D Zwaag .[J].ISIJ International,2000,40:13. |
| [37] | J Majta;A K Zurek .[J].International Journal of Plasticity,2003,19:707. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%