In hot-dip galvanizing process, air jet wiping control is so crucial to decide the coating thickness and uniformity of the zinc layer on the steel strip. The mathematical models developed predict the zinc coating thickness as a function of pressure and shear stress. The required pressure and shear stress profile on the strip surface were calculated using regression analysis, and carried out using numerical simulation as FLUENT, a finite element analysis software. The influences of the outlet pressure, the nozzle to strip distance, the slot opening, the edge baffle plate, as well as the tilting angle of air knife were discussed. Combining with these results and regression analysis on the practical data, four first-order polynomial multi-parameter models were established for different targeted coating thicknesses with better regression coefficients. The validated model was used to carry out sensitivity analysis to determine the favorable controlling regime for the air jet wiping process.
参考文献
| [1] | |
| [2] | Tae-Seok CHO,.Young-Doo KWON, Soon-Bum KWON. A Study of the Influence of Air-knife Tilting on Coating Thickness in Hot-dip Galvanizing[J].Tae-Seok CHO,.Young-Doo KWON, Soon-Bum KWON. A Study of the Influence of Air-knife Tilting on Coating Thickness in Hot-dip Galvanizing[J]. Journal of Thermal Sciencel.Vol.18, No. 3 (2009): 262.[2]K.Myrillas, et al. Technique for delaying splashing in jet wiping process[J]. Chemical Engineering and Processing: Process Intensification. (2010), doi:10.1016/j.cep.2010.09.011:5899[3]HUI ZHANG. Numerical simulation of hot-dip metallic coating process[J]. Int.J.Heat Mass Transfer. Vol. 38,No.2(1995): 241. [4]F. Quignon, L. Schwartzbrod, F. Thomas. Use of Doehlert matrices for study of poliovirus-1 absorption[J].J. Virol. Methods 68 (1997):33.[5]N.Guelton,A.Lerouge. Coating Weight Control on ArcelorMittal’s Galvanizing Line at Florange Works[J].Control Engineering Practice:(2010), doi:10.1016:2. [6]Yang Hong-xia, Yang Hong-yu, Cui Li-li. How to Control and Apply CLECIM DAK Dynamic Air Knives on Galvanizing Line[J]. 2009 CSM Annual Meeting Proceedings 2009,No2:143(in Chinese).[7]Pravin.H, Ananya.M, Shantanu.C. Mathematical Modelling of Jet Finishing Process for Hot-dip Zinc Coating on Steel Strip[J]. ISIJ International, Vol.45(2005),No.2:209[8]Jalel Ben nasr , Ali Snoussi, Chedly Bradai . Optimization of hot-dip galvanizing process of reactive steels: Minimizing zinc consumption without alloy additions[J]. Materials Letters 2008,adoi:10.1016:3328.[9]Soon-Bum KWON, Dong-Won LEE, Young-Doo KWON: Experimental and Computational Studies on Coanda Nozzle Flow for the Air Knife Application[J]. Journal of Thermal Science 2007,Vol.16,No.2:164.[10]CHENG Ji-min, YAN Hong-kai, NIE Xing-li. Numerical simulation of the air knife in hot-dip galvanizing[J]. Heavy-duty Machinery 2009,No2:37.[11]YUAN Yin-mei , LI Chao-xiang. Numerical simulation of the hot galvanizing line[J]. Journal of Anhui University of Technology and Science 2006,Vol21.No.4:27. [12]Deng Chun-rui, Fang Yi-ming, Liu Wen-shu. The Dynamic Air Knife Application in Hot Dip Galvanizing Line[J]. 2009 CSM Annual Meeting Proceedings 2009,No8:789(in Chinese).[13]CHANG Tie-zhu, ZHANG Qing-dong, JIANG Zheng-lian. FEM Simulation of Strip Edge Over Coating During Hot-Dip Galvanizing[J]. Iron and Steel 2009,Vol44,No.1:51. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%