针对目前微观偏析模型形式复杂、求解困难等问题,在比较了目前几个主要的微观偏析模型的计算结果后,基于Scheil模型的方程形式和CK模型在1℃/s冷却速率下的变化趋势,建立了适合连铸坯凝固的简易微观偏析模型.研究表明,该模型可快速并准确预测枝晶间液相浓度与钢的零强度温度(ZST),并可对连铸坯各元素间宏观偏析的关系进行定量判断,大幅度降低了使用难度.
参考文献
| [1] | 蔡兆镇,朱苗勇.钢凝固两相区溶质元素的微观偏析及其对连铸坯表面纵裂纹的影响[J].金属学报,2009(08):949-955. |
| [2] | 冯妍卉,张欣欣.微观偏析对凝固传热传质数值模拟的影响[J].工程热物理学报,2003(01):115-117. |
| [3] | Voller V R.Modeling Micro Scale Phenomena Application in Solidification Process Simulations[A].San Francisco:[s.n.],2000:1011. |
| [4] | Brody H D;Flemings M C .Solute Redistribution During Dendritic Solidification[J].Transactions of the Metallurgical Society of AIME,1966,236:615. |
| [5] | Clyne T W;Kurz W .Solute Redistribution During Solidification With Rapid State Diffusion[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1981,12(06):965. |
| [6] | Ohnaka I .Mathematical Analysis of Solute Redistribution During Solidification With Diffusion in Solid Phase[J].Transactions of the Iron and Steel Institute of Japan,1986,26(06):1045. |
| [7] | Voller V R .A Semi-Analytical Model of Microsegregation in a Binary Alloy[J].Journal of Crystal Growth,1999,197(1-2):325. |
| [8] | Voller V R;Beckermann C .Approximate Models of Micro-Segregation With Coarsening[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1999,30(11):3016. |
| [9] | Nastac L;Stefanescu D M .An Analytical Model for Solute Redistribution During Solidification of Planar,Columnar,or Equiaxed Morphology[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1993,24(09):2107. |
| [10] | Hoseon Yoo;Raymond Viskanta .Solute Redistribution Limit in Coarsening Dendrite Arms During Binary Alloy Solidification[J].International Journal of Heat and Mass Transfer,1997,40(16):3875. |
| [11] | Won Y;Thomas B G .Simple Model of Micro-Segregation During Solidification of Steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2001,32(06):1755. |
| [12] | 蔡开科.连铸坯质量控制[M].北京:冶金工业出版社,2010 |
| [13] | 王芳 .钢液凝固过程中微观偏析模型和传热模型的研究[D].北京:北京科技大学,2010. |
| [14] | Zhongzhu LIU;Jun WEI;Kaike CAI .A Coupled Mathematical Model of Microsegregation and Inclusion Precipitation during Solidification of Silicon Steel[J].ISIJ International,2002(9):958-963. |
| [15] | Matsumiya T;Kajioka H;Mizoguchi S et al.Mathematical Analysis of Segregation in Continuously Cast Slabs[J].Transactions of the Iron and Steel Institute of Japan,1984,24(11):873. |
| [16] | 罗森,朱苗勇,祭程,蔡兆镇.钢连铸过程的溶质微观偏析模型[J].钢铁,2010(06):31-36. |
| [17] | Tuyosi NAKAGAWA;Takateru UMEDA;Jun MURATA .Deformation Behavior during Solidification of Steels[J].ISIJ International,1995(6):723-729. |
| [18] | Schmidtmann E;Rakoski F .Influence of the Carbon Content of 0.015 to 1％ and of the Structure on the High Temperature Strength and Toughness Behavior of Structural Steels After Solidification From the Melt[J].Arch Eisenhutten News,1983,54(09):357. |
| [19] | Adams C J.Hot Ductility and Strength of Strand Cast Steels up to Their Melting Point[A].New York:Lew a Cummings Co.,Inc,1971:290. |
| [20] | Suzuki H G;Nishimura S;Nakamura Y .Improvement of Hot Ductility of Continuously Cast Carbon Steels[J].Iron Steel Inst Jpn,1984,24(01):54. |
| [21] | Shin G;Suzuki T;Umeda T .Effect of Solute Content and Solidification Rate on the Micro-Segregation of Carbon Steels[J].Tetsu To Hagane-Journal of the Iron & Steel Institute of Japan,1992,78(02):275. |
| [22] | ZHONG Zeng-yong;Oeters F .Macro-Segregation in Ternary Systems[J].Steel Research International,1985,56(07):359. |
| [23] | S. K. CHOUDHARY;Suvankar GANGULY .Morphology and Segregation in Continuously Cast High Carbon Steel Billets[J].ISIJ International,2007(12):1759-1766. |
| [24] | 孙齐松,王平,岳增玉.轴承钢小方坯轴向心部组织的不均匀性[J].钢铁,2004(09):28-30,38. |
| [25] | 陈伟庆,南晓东,张克强.高碳钢连铸小方坯缩孔及中心偏析的研究[J].河南冶金,2003(01):8-9,11. |
| [26] | 卢盛意.影响高碳钢连铸小方坯中心偏析的因素[J].连铸,2006(06):22-24,31. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%