通过脉冲电沉积方法制备纳米晶Ni镀层.采用浸泡法和电化学方法研究了不同温度低温退火纳米晶Ni镀层在3.5wt.%NaCl和5wt.%HCl溶液中的腐蚀行为.结果表明:150℃以下退火,晶粒未出现明显长大.在3.5wt.%NaCl溶液中,镀层耐蚀性随退火温度的升高而提高;200℃退火后镀层的耐蚀性最好,镀层表面均有钝化现象.在5wt.%HCI溶液中,退火后镀层的耐蚀性有所提高,但退火温度的影响不大,镀层腐蚀过程中未观察到钝化现象.
参考文献
| [1] | Kh.M.S. Youssef;C.C. Koch;P.S. Fedkiw .Improved corrosion behavior of nanocrystalline zinc produced by pulse-current electrodeposition[J].Corrosion Science,2004(1):51-64. |
| [2] | Kh.M.S. Youssef;C.C. Koch;P.S. Fedkiw .Improved corrosion behavior of nanocrystalline zinc produced by pulse-current electrodeposition[J].Corrosion Science,2004(1):51-64. |
| [3] | Wang LP;Zhang JY;Gao Y;Xue QJ;Hu LT;Xu T .Grain size effect in corrosion behavior of electrodeposited nanocrystalline Ni coatings in alkaline solution[J].Scripta materialia,2006(7):657-660. |
| [4] | A. Hasnaoui;H. Van Swygenhoven;P.M. Derlet .On non-equilibrium grain boundaries and their effect on thermal and mechanical behaviour: a molecular dynamics computer simulation[J].Acta materialia,2002(15):3927-3939. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%