通过对不同含碳量的ER50-6盘条控冷工艺研究。结果发现含碳量和冷却工艺的控制是生产具有优良加工性能的ER50-6盘条的重要保证。ER50-6盘条碳含量控制在＜0.070％时，可以使盘条的抗拉强度的值控制在较低水平 。
The control cooling process of ER50-6 wire rod with different carbon content was studied . The result shows that the most important factor to manufacture quality wire rod is to cooling the carbon content ,and cooling rate after rolling .The strength of wire rod with carbon conten below 0.07% is relative low.
参考文献
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%