研究了不同时效热处理后挤压态γ-TiAl合金在高温期间显微组织的稳定性.结果表明:在1 330 ℃将Ti-47Al-2Cr-2Nb-0.15B合金挤压得到近片层组织,将α单相区热处理后得到全片层组织,在700～1 000 ℃停留不同时间后进行时效处理,从平行挤压方向上观察,在全片层晶界处出现细小γ晶粒,随着时效时间的延长,γ晶粒增大,其体积分数增加;全片层晶粒晶界处的非连续界面处首先发生不连续粗化,最终转变为拉长的γ晶粒,然后层片晶团内部各片层之间的连续界面处发生连续粗化,具有小曲率的薄α2片层开始以逐步变薄的方式断开和溶解,γ片层得到粗化.
参考文献
| [1] | HUANG Shyh-chin;HALL ERNEST L .Plastic deformation and fracture of binary TiAl-base alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1991,22:427-439. |
| [2] | LIPSITT H A.In high-temperature ordered intermetallic alloys[A].Pittsburgh,PA,USA,1985:351-364. |
| [3] | MAZIASZ P J;LIU C T .Development of ultrafine lamellar structure in two-phase γ-TiAl alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29:105-117. |
| [4] | SEMIATIN S L;SEETHARAMAN V;JAIN V K .Microstructure development during conventional and isothermal hot-forging of a near-gamma titanium aluminide[J].Metallurgical and Materials Transactions,1994,25:2753-2768. |
| [5] | JAIN V K;GOETZ R L;SEMIATIN S L .Can design for nonisothermal pancake forging of gamma titanium aluminide alloys[J].Eng Industry,1996,118:155-160. |
| [6] | Jiancheng Tang;Baiyun Huang;Kechao Zhou;Wensheng Liu;Yuehui He;Yong Liu .Factors affecting the lamellar spacing in two-phase TiAl alloys with fully lamellar microstructures[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2001(9):1737-1742. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%