在650℃、保温10～50 min下对纯钛进行再结晶等温加热处理.保温开始阶段,晶粒尺寸增长速率较慢,由于热轧态下纯钛不同晶粒间晶格畸变能的较大差异,出现了晶粒竞争生长现象,保温初期晶粒尺寸差异明显,一些大晶粒内出现孪晶；在随后的加热过程中,由于晶体内高晶格畸变能,并伴孪生切变,晶粒生长过程中原子扩散速率逐步提高,晶粒增长速率增加,晶粒尺寸趋于均匀.进一步研究更长时间的再结晶加热过程发现:由于晶粒晶格畸变能及孪晶的消失,晶粒增长速率将会逐步降低.
参考文献
| [1] | Ti based biomaterials, the ultimate choice for orthopaedic implants - A review[J].Progress in materials science,2009(3):397. |
| [2] | 陈军,杨海瑛,赵永庆,王廷询.热处理对TC4-DT钛合金棒材组织和性能的影响[J].热加工工艺,2010(06):143-145,148. |
| [3] | I. Gurrappa .Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications[J].Materials Characterization,2003(2/3):131-139. |
| [4] | Rack HJ;Qazi JI .Titanium alloys for biomedical applications[J].Materials science & engineering, C. Biomimetic and supramolecular systems,2006(8):1269-1277. |
| [5] | 樊亚军,曹继敏,王卫民,陈志宏.医用植入物β型钛合金的力学相容性[J].金属热处理,2010(12):24-28. |
| [6] | N. Poondla;T.S. Srivatsan;A. Patnaik .A study of the microstructure and hardness of two titanium alloys: Commercially pure and Ti-6Al-4V[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2009(1/2):162-167. |
| [7] | 付文杰,赵西成,杨西荣,兰新哲.室温ECAP和冷轧复合变形工业纯钛的组织和性能[J].材料研究学报,2008(03):303-306. |
| [8] | 陈常强,李守新,李广义,艾素华.低氢含量工业纯钛循环变形的微观结构Ⅰ.γ氢化物附近的晶体旋转及胞结构的形成[J].金属学报,2004(03):235-240. |
| [9] | O.M. Ivasishin;S.L. Semiatin;P.E. Markovsky .Grain growth and texture evolution in Ti-6Al-4V during beta annealing under continuous heating conditions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):88-96. |
| [10] | 李文鹏,陈永楠,李中伟,魏建锋,赵永庆.热循环温度对Ti-6Al-4V合金组织和力学性能的影响[J].材料热处理学报,2012(01):106-109. |
| [11] | Li SJ;Zhang YW;Sun BB;Hao YL;Yang R .Thermal stability and mechanical properties of nanostructured Ti-24Nb-4Zr-7.9Sn alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):101-108. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%