欢迎登录材料期刊网

材料期刊网

高级检索

通过Gleeble热模拟试验建立动态再结晶动力学模型,研究氧化夹杂对1235铝合金的动态再结晶行为的影响。研究表明,经不同净化处理的1235铝合金在热变形条件下均发生一定程度的动态再结晶。动态再结晶体积分数的计算值与实测值接近(相关系数R大于0.92),相关性高。在相同热变形条件下,含杂量越低,热压缩时动态再结晶的速度越慢,细小的夹杂物阻碍了动态再结晶晶粒的长大,再结晶晶粒细小。

Effect of oxide inclusion on dynamic recrystallization behavior of 1235 aluminum alloy were investigated by hot compression deformation tests on a Gleeble-1500 simulator and a dynamic recrystallization kinetics model was established.Results show that dynamic recrystallization occurred in 1235 aluminum alloy treated by different purification processes during hot deformation.The predicted results of dynamicaly recrystallized volume fraction by the model agrees well with the measured ones.At the same condition of deformation,the process of dynamic recrystallization occurs more slowly in the alloy with less impurities.Tiny inclusions inhibite the growth of recrystallized grains.As a result,the recrystallization grains are smaller.

参考文献

[1] 程杰.铝箔生产及深加工[M].长沙:中南大学出版社,2010:8-18.
[2] 徐光;张丕军.金属低温变形理论与技术[M].北京:冶金工业出版社,2007:116-138.
[3] Gourdet S;Montheillet F .An experimental study of recrystallization mechanism during hot deformation of aluminum[J].Material Science andEngineering A,2000,283:274-288.
[4] G.S. Fu,W.Z. Chen,K.W. Qian.BEHAVIOR OF FLOW STRESS OF ALUMINUM SHEETS USED FOR PRESSURE CAN DURING COMPRESSION AT ELEVATED TEMPERATURE[J].金属学报(英文版),2005(06):756-762.
[5] Alankar;Loannis N;Mastorakoos .Development of a 3D crystal plasticity model that tracks dislocation density evolution[J].Acta Materials,2009,57:5936-5946.
[6] Attallah M M;Davis C L;Strangwood M .Influence of base metal microstructure on microstructural development in aluminum based alloy friction stirwelds[J].Journal of Materials Science,2007,42:7299-7232.
[7] 马博,彭艳,刘云飞,贾斌.低合金钢Q345B动态再结晶动力学模型[J].材料热处理学报,2010(04):141-146.
[8] Deng, Y.;Yin, Z.;Huang, J. .Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(3):1780-1786.
[9] Hakan Hallberg;Mathias Wallin;Matti Ristinmaa .Modeling of continuous dynamic recrystallization in commercial-purity aluminum[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(4/5):1126-1134.
[10] 陈永禄,傅高升,陈文哲,王火生.均匀化退火对Al-1Mn-1Mg合金高温压缩流变应力的影响[J].材料热处理学报,2008(02):103-107.
[11] Miyamoto H;Ota K;Mimaki T .Viscous nature of deformation of ultra-fine grain aluminum prosessed by equal-channel angular pressing[J].Scripta Materialia,2006,54:1721-1725.
[12] Robson, J.D.;Henry, D.T.;Davis, B. .Particle effects on recrystallization in magnesium-manganese alloys: Particle pinning[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(12):4239-4247.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%