分别介绍了Ti(C,N)陶瓷材料、Ti(C,N)基金属陶瓷材料和Ti(C,N)基复相陶瓷材料的组织结构、性能、优势及其制备方法.Ti(C,N)陶瓷材料的制备方法主要有气相沉积法、激光熔覆法和自反应喷涂法,Ti(C,N)基金属陶瓷材料的制备方法主要有粉末冶金法和自蔓延高温合成法,Ti(C,N)基复相陶瓷材料的制备方法主要有自反应喷射成形法和自反应喷涂法.最后介绍了Ti(C,N)材料的应用及其应用的局限性.
参考文献
| [1] | Mridha S .Titanium nitride layer formation by TIG surface melting in a reactive environment[J].Journal of Materials Processing Technology,2005,168:471. |
| [2] | 郑勇,熊惟皓,宗校军,余立新,李国安.Ti（C,N）基金属陶瓷氮化处理后的表面组织结构及形成机理[J].硅酸盐学报,2003(03):262-267. |
| [3] | Rebelo de Figueiredo M;Neidhardt J;Kaindl R et al.Formation mechanisms of low-friction tribo-layers on arc-evaporated TiC1-x Nx hard coatings[J].Wear,2008,265:525. |
| [4] | Park S;Kang S .Toughened ultra-fine (Ti,W)(CN)-Ni cermets[J].Scripta Materialia,2005,52:129. |
| [5] | Lavrenko V A;Panasyuk A D et al.Kinetics and mechanism of electrolyticcorrosion of titanium-based ceramics in 3%NaCl solution[J].Journal of the European Ceramic Society,2005,25:1813. |
| [6] | Bolognini S;Feusier G;Mariet D et al.TiMoCN-based cermets:High-temperature deformation[J].International Journal of Refractory Metals and Hard Materials,2003,21(1-2):19. |
| [7] | Xiong J et al.Preparation of ultra-fine TiC0.7 N0.3-based cermet[J].International Journal of Refractory Metals and Hard Materials,2008,26:212. |
| [8] | 刘荣祥,郭立新,雷廷权.激光重熔NiCrBSi+TiN复合涂层及界面组织[J].中国激光,2005(02):292-296. |
| [9] | N. Liu;Y.-D. Xu;H. Li .Effects of addition of TiN nanoparticles on microstructure and mechanical properties of TiC based cermets[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2002(5):586-590. |
| [10] | Joardar J;Kim S W;Kang S .GI-XRD studies on surface structure of ultrafine Ti (C0.5 N00.5)-WC-Ni cermets at high temperature[J].Wear,2006,261(3-4):360. |
| [11] | Tracey V A .Nickel in bard metals[J].RM ＆ HM,1992,11(01):137. |
| [12] | Ehira M Aegami .Mechanical properties and microstructure of submicron cermets[J].International Journal of Refractory Metals and Hard Materials,1995,13:313. |
| [13] | Bolognini S;Feusier G;Marl D et al.High temperature mechanical behavior of Ti(C,N)-Mo-Co cermets[J].International Journal of Refractory Metals and Hard Materials,1998,16:257. |
| [14] | Zackrisson J;Andren H O .Effect of carbon content on the microstructure and mechanical properties of (Ti,W,Ta,Mo)(C,N)-(Co,Ni) cermets[J].International Journal of Refractory Metals and Hard Materials,1999,17:265. |
| [15] | D' Errico G E;Bngliosi S;Cuppini D et al.A study of cermets' wears behavior[J].Wear,1997,204-204:242. |
| [16] | Chen L.;Lengauer W. .Advances in modern nitrogen-containing hardmetals and cermets[J].International Journal of Refractory Metals & Hard Materials,2000(2/3):153-161. |
| [17] | George levi .Structure refinement of titanium carbonitride (TiCN)[J].Materials Letters,1998(5/6):344-350. |
| [18] | Zhang S Y .Titanium carbonitride-based cermets:Processes and properties[J].Materials Science and Engineering,1993,A163(03):141. |
| [19] | Cardinal S;Malchère A et al.Microstructure and mechanical properties of TiC-TiN based cermets for tools application[J].International Journal of Refractory Metals and Hard Materials,2009,27:521. |
| [20] | Karisson L;Huitman L et al.Growth,microstructure and mechanical properties of arc evaporated TiCx N1-x (0≤x≤1)films[J].Surface and Coatings Technology,2000,126:1. |
| [21] | Yang Q.;Lengauer W. .Hardness and elastic properties of Ti(C_xN_(1-x)), Zr(C_xN_(1-x)) and Hf(C_xN_(1-x))[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2000(1/2):L5-L9. |
| [22] | J.Xiang;Z.Xie .Synthesis of Ti(C,N) ultrafine powders by carbothermal reduction of TiO_2 derived from sol-gel process[J].Journal of the European Ceramic Society,2000(7):933-938. |
| [23] | 徐滨士.表面工程的理论与技术[M].北京:国防工业出版社,1999 |
| [24] | 张叶成,张津,郭小燕,许洪斌.PCVD技术在模具强化中的应用与进展[J].模具工业,2008(02):64-68. |
| [25] | 王昕,马大衍,马胜利,徐可为.脉冲直流 PCVD制备Ti（C,N）薄膜及其组织结构分析[J].稀有金属材料与工程,2004(02):204-206. |
| [26] | Herranen M.;Carlsson JO.;Hogmark S.;Wiklund U. .Corrosion behaviour of Ti/TiN multilayer coated tool steel[J].Surface & Coatings Technology,1998(1/2):191-196. |
| [27] | 周孝重;陈大凯.等离子体热处理技术[M].北京:机械工业出版社,1990 |
| [28] | 潘应君,陈淑花,吴新杰,李平生,张细菊.金属有机物PCVD法沉积Ti（CN）涂层[J].中国有色金属学报,2004(z1):272-275. |
| [29] | 李俊昌.激光热处理优化控制研究[M].北京:冶金工业出版社,2001 |
| [30] | 谢明.材料表面的激光熔覆技术及展望[J].邵阳学院学报(自然科学版),2004(03):47-48,51. |
| [31] | 齐勇田,邹增大,曲仕尧,朱庆军.Ti（C0.3N0.7）/铁基复合耐磨熔覆层激光熔覆[J].焊接学报,2007(11):33-36. |
| [32] | 齐勇田,施瀚超.Ti（C、N）陶瓷颗粒对镍基激光熔覆层组织和性能影响[J].中国表面工程,2008(02):26-30. |
| [33] | 杜心康,叶明惠,周珑,王建江,陆大勤.自蔓延反应喷涂表面涂层技术进展[J].军械工程学院学报,2003(04):6-10,26. |
| [34] | ZHU Lin,HE JiNing,YAN DianRan,XIAO LiSong,DONG YanChun,XUE DingChuan,MENG DeLiang.Titanium carbonitride thick coating prepared by plasma spray synthesis and its tribological properties[J].科学通报（英文版）,2007(13):1849-1855. |
| [35] | 郑勇,刘文俊,游敏,袁泉.Cr3C2和VC对Ti（C,N）基金属陶瓷中环形相的价电子结构和性能的影响[J].硅酸盐学报,2004(04):422-428. |
| [36] | Liu N;Yin W H;Zhu L W .Effect of TiC/TiN powder size on microstructure and properties of Ti(C,N)-based cermets[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,445-446:707. |
| [37] | 邱小林.Ti（C,N）基金属陶瓷的研究进展[J].材料导报,2006(z1):420-423,427. |
| [38] | Liu N;Liu X S et al.Effect of carbon content on the microstructure and mechanical properties of superfine Ti(C,N)-based cermets[J].Materials Characterization,2008,59:1440. |
| [39] | Zhou S Q;Zhao W et al.Effect of Mo and Mo2C on the microstructure and properties of the cermets based on Ti(C,N)[J].Acta Mathematicae Applicatae Sinica(English Series),2008,21(03):211. |
| [40] | Wang J;Liu Y;Zhang P et al.Effect of WC on the microstructure and mechanical properties in the Ti (C0.7 No0.3)xWC-Mo2C-(Co,Ni) system[J].International Journal of Refractory Metals and Hard Materials,2009,27:9. |
| [41] | 康新婷;刘素英;蒋纪麟 .Ti(C,N)基金属陶瓷的制备与应用[J].硬质合金,1999,16(01):51. |
| [42] | Wang J;Liu Y;Feng Y et al.Effect of NbC on the microstructure and sinterability of Ti (C0.7,No0.3)-based cermets[J].International Journal of Refractory Metals and Hard Materials,2009,27:549. |
| [43] | Wang Jun;Liu Ying;Zhang Ping;Ye Jinwen;Tu Mingjing .Effect of VC and nano-TiC addition on the microstructure and properties of micrometer grade Ti(CN)-based cermets[J].Materials & design,2009(6):2222-2226. |
| [44] | Xiao B Z;Liu N;Rong C L et al.Microstructure and mechanical properties of TiC-TiN-Zr-WC-Ni-Co cermets[J].Ceramics International,2009,35:1187. |
| [45] | Zhou S Q;Zhao W;Xiong W H .Microstructure and properties of the cermets based on Ti(C,N)[J].International Journal of Refractory Metals and Hard Materials,2009,27:26. |
| [46] | Mari D;Bolognini S et al.TiMoCN based cermets.Part Ⅱ:Microstructure and room temperature mechanical properties[J].International Journal of Refractory Metals and Hard Materials,2003,21:47. |
| [47] | Gong J H;Pan X T;Miao H Z et al.Effect of metallic binder content on the microstructure of TiCN-based cermets[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2003,359:391. |
| [48] | 刘峰晓,贺跃辉,黄伯云,刘咏.Ti（C,N）基金属陶瓷的发展现状及趋势[J].粉末冶金技术,2004(04):236-240. |
| [49] | 丰平,熊惟皓,余立新.Ti（C,N）基金属陶瓷烧结过程的冶金基础及其显微组织特征Ⅱ芯-环结构的形成机理及烧结过程中的脱气演化[J].材料导报,2004(03):6-8,37. |
| [50] | 望军,刘颖,张平,彭建财,叶金文,涂铭旌.烧结压力对Ti（CN）基金属陶瓷微观结构及力学性能的影响[J].四川大学学报(工程科学版),2008(01):101-106. |
| [51] | 刘文俊,郑勇,游敏.烧结温度对细晶粒Ti（C,N）基陶瓷组织和性能的影响[J].三峡大学学报(自然科学版),2003(02):114-117. |
| [52] | 周书助,王社权,彭卫珍,王零森.烧结气氛对Ti（CN）基金属陶瓷组织和性能的影响[J].中国有色金属学报,2005(09):1350-1357. |
| [53] | 周书助,卓海宇,胡茂中.纳米晶Ti（CN）基金属陶瓷的研究[J].硬质合金,2006(01):5-7. |
| [54] | 余立新,李晨辉,熊惟皓,曾古桥.Ti（C,N）基金属陶瓷在烧结-热等静压条件下的组织、性能研究[J].硬质合金,2001(02):69-73. |
| [55] | Córdoba J M;Sánchez-López J C et al.Properties of Ti(C,N) cermets synthesized by mechanically induced self-sustaining reaction[J].Journal of the European Ceramic Society,2009,29:1173. |
| [56] | Lei Zhan;Ping Shen;Shenbao Jin .Combustion synthesis of Ti(C, N)-TiB_2 from a Ti-C-BN system[J].Journal of Alloys and Compounds,2009(2):315-320. |
| [57] | 刘宏伟,张龙,王建江,杜心康.自反应喷射成形Ti（C, N）-TiB2复合陶瓷坯件的反应转化机理[J].热加工工艺,2008(12):26-29,114. |
| [58] | 王建江,杜心康,刘宏伟,陆大勤,薛锦,潘希德.TiC-TiB2复相陶瓷涂层的反应火焰喷涂制备[J].复合材料学报,2006(04):100-105. |
| [59] | 刘宏伟 .Ti(C,N)-TiB2基金属陶瓷坯件的白反应喷射成形研究[D].石家庄:军械工程学院,2008. |
| [60] | 刘宏伟,张龙,王建江,杜心康.自反应喷射成形制备TiC-TiB2复合陶瓷[J].材料研究学报,2008(03):274-278. |
| [61] | 王建江,刘宏伟,张龙,李伟波.反应火焰喷涂工艺对复相陶瓷涂层孔隙率和硬度的影响[J].金属热处理,2008(03):59-62. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%