使用两步离子交换法制备工程应力分布玻璃( ESP玻璃)。两步离子交换中第一步交换时间较长,第二步交换时间较短。主要研究经过不同第一步离子交换工艺制度后的ESP玻璃性能上的区别。本文对ESP玻璃测试了弯曲强度,显微硬度,K+分布状态,并根据弯曲强度,K+分布状态计算得出Weibull模量以及离子扩散系数。结果表明：第二步离子交换会降低第一步离子交换玻璃的弯曲强度,而两步离子交换后的ESP玻璃其Weibull模量有所升高。显微硬度趋势与弯曲强度趋势一致。结合抗折强度以及K+分布状态,可知第一步离子交换最佳温度为450℃,时间30 h；第二步离子交换最佳温度为400℃,时间33 min。
Two step ion-exchanged method for preparing engineered stress profile glass ( ESP glass ) is used in this paper. The first step ion-exchanged time is longer than the second step ion-exchanged time in the two step ion-exchanged method. The difference in the performance of ESP glass after different first step ion-exchanged process is studied. In this paper, the ESP glass is tested by the bending strength test, micro hardness test, EPMA test. Weibull modulus could be calculated by the bending strength, and the ion diffusion coefficient could be calculated by the K ion distribution. The results show:the second step ion-exchanged could reduce the bending strength of the first step ion-exchanged glass. But after the two step ion-exchanged process, ESP glass has a higher Weibull modulus. The trend of micro hardness is consistent with the trend of bending strength. Combined with the bending strength and K ion distribution, the best temperature of the first step ion-exchanged is 450℃, and the time is 30 h. The second step ion-exchanged temperature is 400 ℃, and the time is 33 min.
参考文献
| [1] | 王海风;贺雅飞;郭明星;韩文爵.化学钢化工艺对钢化玻璃耐磨性的影响[J].摩擦学学报,2007(6):524-528. |
| [2] | 贲静;李宇.化学钢化玻璃强度影响因素控制[J].玻璃,2004(5):53-55. |
| [3] | 程金树;朱连英;楼贤春.玻璃钢化方法的探讨[J].材料导报,2012(z1):135-137,162. |
| [4] | Sglavo VM;Prezzi A;Alessandrini M.Processing of glasses with engineered stress profiles[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,20041/2(1/2):73-78. |
| [5] | 刘永华;祖成奎;包亦望;陈江;万德田.无碱铝硅酸盐钢化玻璃的安全性评价[J].硅酸盐通报,2011(6):1264-1267. |
| [6] | Matthew B. Abrams;David J. Green.Prediction of crack propagation and fracture in residually stressed glass as a function of the stress profile and flaw size distribution[J].Journal of the European Ceramic Society,200613(13):2677-2684. |
| [7] | 赵国华;马婧;田纯祥.影响化学钢化玻璃强度的因素[J].玻璃,2009(4):31-34. |
| [8] | 许杰;吴云龙;赵芳红;张保军;马眷荣.工程应力分布玻璃研究进展[J].硅酸盐学报,2009(12):2135-2141. |
| [9] | Phillip Jannotti;Ghatu Subhash;Peter Ifju.Influence of ultra-high residual compressive stress on the static and dynamic indentation response of a chemically strengthened glass[J].Journal of the European Ceramic Society,20128(8):1551-1559. |
| [10] | 王艳霞;陈志红;刘学理.离子交换增强玻璃研究进展[J].玻璃,2014(6):34-37. |
| [11] | Green DJ..Critical parameters in the processing of engineered stress profile glasses[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,20031(1):35-41. |
| [12] | 宋世学;邱学农.关于脆性陶瓷材料R-曲线行为表达式的讨论[J].济南大学学报（自然科学版）,2007(3):197-199. |
| [13] | 许杰;赵芳红;张保军;马眷荣.高温处理对离子交换玻璃力学性能的影响[J].武汉理工大学学报,2009(22):110-112. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%