采用铜模喷铸和单辊甩带分别制备AZ91D镁合金非平衡凝固试样,利用ProCAST数值模拟软件及理论公式分别估算相应冷却速率.综合采用光学显微镜、扫描电镜、能谱分析仪、X射线衍射仪及差热分析仪对比研究冷却速率对镁合金非平衡凝固组织的影响规律.结果表明:随冷却速率提高,AZ91D合金的初生相形貌从粗大枝晶向细小等轴晶发生转变,晶粒发生明显细化,平均尺寸从铸态条件下的800 μm降低到单辊甩带条件下的5μm以内.共晶相从连续网状向不连续弥散状分布转变,体积分数不断减小,单辊甩带条件下可制备出单相固溶体组织.快速凝固条件下合金基体中Mg和Al元素成分分布均匀,溶质偏析得到有效控制.
参考文献
| [1] | MORDIKE B L;EBERT T .Magnesium propertiesapplications-potential[J].Materials Science and Engineering A,2001,302(01):37-45. |
| [2] | ELIEZER D;AGHION E;FROES F H .Magnesium science,technology and applications[J].ADVANCED PERFORMANCE MATERIALS,1998,5(03):201-212. |
| [3] | H. Friedrich;S. Schumann .Research for a "new age of magnesium" in the automotive industry[J].Journal of Materials Processing Technology,2001(3):276-281. |
| [4] | YAMASHIA A;HORITA I;LANGDON T G .Improving the mechanical properties of magnesium and magnesium alloy through severe plastic deformation[J].Materials Science and Engineering A,2001,300(01):142-147. |
| [5] | K. Kubota;M. Mabuchi .Review Processing and mechanical properties of fine-grained magnesium alloys[J].Journal of Materials Science,1999(10):0-0. |
| [6] | Chen Jihua;Wei Juying;Yan Hongge;Su Bin;Pan Xueqiang .Effects of cooling rate and pressure on microstructure and mechanical properties of sub-rapidly solidified Mg-Zn-Sn-Al-Ca alloy[J].Materials & design,2013(Mar.):300-307. |
| [7] | Jones H. .A perspective on the development of rapid solidification and nonequilibrium processing and its future[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):11-19. |
| [8] | 肖冬飞,谭敦强,欧阳高勋,陈伟.镁合金快速凝固技术的研究现状及进展[J].铸造,2007(09):909-913. |
| [9] | 徐锦锋,翟秋亚,袁森.AZ91D镁合金的快速凝固特征[J].中国有色金属学报,2004(06):939-944. |
| [10] | 盛绍顶,严红革,陈振华.快速凝固粉末冶金AZ91镁合金的组织性能[J].矿冶工程,2010(01):69-72. |
| [11] | KAWAMARA Y;HAYASHI K;INOUE A .Rapidly solidified power metallurgy Mg97Zn1Y2 alloys with excellent tensile yield strength above 600 MPa[J].Materials Transactions JIM,1999,42(07):1172-1176. |
| [12] | Haitao Teng;Xiaoli Zhang;Zhongtao Zhang .Research on microstructures of sub-rapidly solidified AZ61 Magnesium Alloy[J].Materials Characterization,2009(6):482-486. |
| [13] | 徐春杰,郭学锋,刘礼,张忠明.往复挤压准晶增强快速凝固Mg92.5Zn6.4Y1.1合金[J].中国稀土学报,2007(02):224-228. |
| [14] | 周涛,夏华,周志明,彭成允,陈康,库美芳,陈振华.快速凝固Mg-6Zn-5Ce合金的微观组织研究[J].材料导报,2011(04):97-99,110. |
| [15] | SHENG Shao-ding,陈鼎,CHEN Zhen-hua,陈刚,YAN Hong-ge.快速凝固/粉末冶金AZ91/SiCp镁基复合材料的相组成及界面[J].中国有色金属学报,2008(07):1185-1190. |
| [16] | Waterloo G.;Jones H. .MICROSTRUCTURE AND THERMAL STABILITY OF MELT-SPUN AL-ND AND AL-CE ALLOY RIBBONS[J].Journal of Materials Science,1996(9):2301-2310. |
| [17] | KURZ W;FISHER D J.Fundamentals of solidification[M].Switzerland:Trans Tech Publications Inc,1998:125-127. |
| [18] | 刘楚明;朱秀荣;周海涛.镁合金相图集[M].长沙:中南大学出版社,2006:4. |
| [19] | W. Yang;F. Liu;H.F. Wang .Non-equilibrium transformation kinetics and primary grain size distribution in the rapid solidification of Fe-B hypereutectic alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2011(6):2903-2908. |
| [20] | AZIZ M J .Model for solute redistribution during rapid solidification[J].Journal of Applied Physics,1982,53:1158-1168. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%