Nanostructured (NS) W- Cu composite powder was prepared by mechanical alloying ( MA ), and nanostructured bulk of W- Cu contact material was fabricated by hot press sintering in an electrical vacuum furnace. The microstructure, electric conductivity, hardness and break down voltage of NS W-Cu alloys were measured and compared to those of conventional W- Cu alloys prepared by powder metallurgy. The experimental results show that microstructural refinement and uniformity can improve the breakdown behavior and the electric arc stability of nanostructured W- Cu contacts materials. Also, the nanostructured W- Cu contact material shows the characteristic of spreading electric arcs, which is of benefit to electric arc erosion.
参考文献
| [1] | LASZLO J. KECSKES;MATTHEW D. TREXLER;BRADLEY R. KLOTZ .Densification and Structural Change of Mechanically Alloyed W-Cu Composites[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(11):2885-2893. |
| [2] | Bregel T.;Krauss-Vogt W. .On the application of W/Cu materials in the fields of power engineering and plasma technology[J].IEEE transactions on components, hybrids, and manufacturing technology,1991(1):8-13. |
| [3] | C S Xiong;Y H Xiong;H Zhu;T F Sun et al.Synthesis and Structural Studies of the Cu-W Alloys Prepared by Mechanical Alloying[J].Nano-Structured Materials,1995,5(05):425. |
| [4] | Jin-Chun Kim;Sung-Soo Ryu;Young Do Kim;In-Hyung Moon .Densification behavior of mechanically alloyed W-Cu composite powders by the double rearrangement process[J].Scripta materialia,1998(6):669-676. |
| [5] | Jin-Chun Kim;Sung-Soo Ryu;In-Hyung Moon .Nanostructural Characteristics and Sintering Behavior of W-Cu Composite Powder Prepared by Mechanical Alloying[J].Journal of advanced materials,1999(4):37-44. |
| [6] | D. Y. Ying;D. L. Zhang .Effect of high energy ball milling on solid state reactions in Al-25 at. - percent Ni powders[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2001(7):815-822. |
| [7] | J C Kim;I H Moon .Sintering of Nanostructured W-Cu Alloys Prepared by Mechanical Alloying[J].Nano-Structured Materials,1998,10(02):283. |
| [8] | J Kaczmar .Effect of Production Engineering Parameters on Structure and Proerties of Cu-W Composite Powders[J].POWDER METALLURGY,1989,32(03):171. |
| [9] | Bingjun Ding;Zhimao Yang .Influence of microstructure on dielectric strength of CuCr contact materials in a vacuum[J].IEEE Transactions on Components, Packaging, and Manufacturing Technology. Part A,1996(1):76-81. |
| [10] | H Zhang;Z Yang;B J Ding .Characteristic of W-ThO2 Thermionic Cathode Activated with Nanoscale Oxide[J].IEEE Trans On CPT Part A,1999,22(03):455-459. |
| [11] | Y Wang;B J Ding .The Preparation and Properties of Microcrystalline and Nanocrystalline CuCr Contact Materials[J].IEEE Trans On CPT Part A,1999,22(03):467-472. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%