设计了一种新型双层结构的石油钻机刹车块，研究了丁腈橡胶对摩擦材料力学与摩擦学性能的影响；采用均匀设计方法和SAS软件对所研制刹车块摩擦层的材料配方进行了优化。结果表明：丁腈橡胶可显著提高摩擦材料的冲击强度，降低其硬度和密度；配方优化后材料的摩擦因数高且稳定，磨损率低；与市售的半金属刹车块相比，在350℃时，其热衰退率可减小约51％，磨损率可降低约34．7％；研制的双层刹车块制动灵敏，无噪声，使用寿命可延长60％以上。
A new two-layer brake block for oil rig was designed. The effect of nitrile butadience rubber （NBR） on mechanical and tribological performances of frictionmaterials was studied. The material formula of friction layer of brake blocks was optimized with uniform design method and SAS software. The results show that the NBR could significantly increase impact strength of the friction material, and reduce the hardness and density; the coefficient of friction of the material with optimized formula was high and stable, the rate of wear was low. Compared with merchant semi-metal brake blocks, the rate of heat and wear fade and wear might decrease by about 51% and 34. 7% at 350℃. The developed two-layer brake block braked sensitively and noiselessly, its working life prolonged over 60%.
参考文献
| [1] | 夏安龙.石油钻机无石棉刹车块的研制与应用[J].石油机械,2000(04):32-34. |
| [2] | 沈仲英.粉末丁腈橡胶在摩擦材料中的应用[J].非金属矿,1995(05):51-53. |
| [3] | 王新华,张嗣伟,王德国.石油钻机盘式刹车块材料的磨损机制研究[J].润滑与密封,2008(02):5-8,16. |
| [4] | 林荣会,郗英欣,邵艳霞,方亮.原位同生法制备纳米铜改性酚醛树脂[J].高分子材料科学与工程,2004(06):210-213. |
| [5] | 廖子龙.芳纶的市场需求与芳纶浆粕的应用[J].高科技纤维与应用,2008(03):36-39. |
| [6] | 郭洪涛,张佐光,仲伟虹,李敏.碳纤维/芳纶浆粕摩阻复合材料初步研究[J].复合材料学报,2001(02):50-53. |
| [7] | 曾宪佑,黄畴,黄红明,郭惠玲.丁腈橡胶、腰果油改性酚醛树脂的研究[J].化学与生物工程,2005(02):21-23. |
| [8] | 刘伟,胡以强.基于两种丁腈橡胶复合填料的高性能离合器摩擦材料[J].化工中间体,2009(03):67-72. |
| [9] | 车剑飞,宋晔,陆怡平,马卫华,吉法祥.均匀设计在摩擦材料配方设计中的应用[J].南京理工大学学报（自然科学版）,1999(03):249-252. |
| [10] | 王晓东,徐晓伟,李艳萍,关岩,李玉萍.丁腈橡胶粉末对酚醛树脂性能的影响[J].粘接,2006(05):16-17. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%