采用有机化蒙脱土(OMMT)和碳纳米管(MWCNTs)2种纳米材料改性双酚A型环氧树脂.通过溶液共混法制备OMMT/EP、MWCNTs/EP、OMMT/MWCNTs/EP环氧树脂纳米复合材料.利用扫描电子显微镜观察了复合材料的冲击断面,测试了复合材料的力学性能和热性能,探讨了OMMT、MWCNTs增韧环氧树脂的机理.结果表明,当试样中OMMT质量分数为4％,MWCNTs质量分数为0.7％时,OMMT/EP、MWCNTs/EP和OMMT/MWCNTs/EP的冲击强度分别达到16.8 kJ/m2,23.1 kJ/m2,30.4 kJ/m2,较未掺杂环氧树脂分别提高了16.7％,60.4％,110％.弯曲强度较未改性环氧树脂分别提高了27.54％,35.74％,54.12％.3种复合材料的热分解温度和马丁耐热温度均较未改性环氧树脂略有提高.
参考文献
| [1] | Jianwei Zhang;Dazhi Jiang .Interconnected multi-walled carbon nanotubes reinforced polymer-matrix composites[J].Composites science and technology,2011(4):466-470. |
| [2] | 汪源,王源升.不同结构聚合物核壳粒子对环氧树脂的增韧改性[J].高分子材料科学与工程,2012(02):23-27. |
| [3] | Byung Chul Kim;Sang Wook Park;Dai Gil Lee .Fracture toughness of the nano-particle reinforced epoxy composite[J].Composite structures,2008(1/3):69-77. |
| [4] | P. Kiliaris;C.D. Papaspyrides .Polymer/layered silicate (clay) nanocomposites: An overview of flame retardancy[J].Progress in Polymer Science,2010(7):902-958. |
| [5] | Long-cheng Tang;Hui Zhang;Jin-hua Han;Xiao-ping Wu;Zhong Zhang .Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes[J].Composites science and technology,2011(1):7-13. |
| [6] | 张明艳,隋珊,陈金玉,吴淑龙,孙睿,郭宁.功能化碳纳米管/环氧树脂复合材料性能研究[J].电工技术学报,2014(04):97-102. |
| [7] | Zhicai Wang;Cailing Xu;Yongqing Zhao .Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):481-487. |
| [8] | 王合情,曹诺,肖卫东,胡高平.纳米有机蒙脱土改性环氧树脂的研究[J].现代塑料加工应用,2007(06):8-10. |
| [9] | Ke Wang;Ling Chen;W Jingshen Wu;Mei Ling Tov;Chaobin He;Albert F.Yee .Epoxy Nanocomposites with Highly Exfoliated Clay:Mechanical Properties and Fracture Mechanisms[J].Macromolecules,2005(3):788-800. |
| [10] | 陈金玉 .碳纳米管/环氧树脂纳米复合材料的制备及力、热性能影响机理[D].哈尔滨理工大学,2014. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%