采用β成核的动态硫化iPP/EPDM共混物即热塑性硫化胶(TPV)改性聚丙烯,并与通用增韧剂聚烯烃弹性体(POE)、三元乙丙橡胶(EPDM)增韧聚丙烯进行比较,考察了增韧体系的力学性能、热性能和相形态.结果表明,随增韧剂含量的增加,增韧体系的拉伸屈服强度和弯曲模量均有所下降,而冲击强度提高.TPV改性体系的强度、模量和维卡耐热温度较高,而冲击强度与EPDM改性体系相近,表现出了良好的综合性能.
参考文献
| [1] | van der Wal A.;Gaymans RJ.;Mulder JJ. .Polypropylene-rubber blends: 1. The effect of the matrix properties on the impact behaviour[J].Polymer: The International Journal for the Science and Technology of Polymers,1998(26):6781-6787. |
| [2] | Yiqun Liu;Marianna Kontopoulou .The structure and physical properties of polypropylene and thermoplastic olefin nanocomposites containing nanosilica[J].Polymer: The International Journal for the Science and Technology of Polymers,2006(22):7731-7739. |
| [3] | Kim JK.;Lee SH.;Hwang SH. .Experimental investigation of the morphology development and mechanical properties of waste ethylene propylene diene monomer/polypropylene blend in modular intermeshing corotating twin-screw extruder[J].Journal of Applied Polymer Science,2002(11):2276-2282. |
| [4] | Jinhai Yang;Yong Zhang;Yinxi Zhang .Brittle-ductile transition of PP/POE blends in both impact and high speed tensile tests[J].Polymer: The International Journal for the Science and Technology of Polymers,2003(17):5047-5052. |
| [5] | Grein C.;Plummer CJG.;Kausch HH.;Germain Y.;Beguelin P. .Influence of beta nucleation on the mechanical properties of isotactic polypropylene and rubber modified isotactic polypropylene[J].Polymer: The International Journal for the Science and Technology of Polymers,2002(11):3279-3293. |
| [6] | Menyhard A;Varga J;Liber A;Belina G .Polymer blends based on the beta-modification of polypropylene[J].European Polymer Journal,2005(4):669-677. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%