采用电化学测试、失重试验、铜加速乙酸盐雾试验等方法,研究了X80大变形管线钢的腐蚀行为.结果表明,在电化学试验中,X80大变形管线钢在NaCl溶液中的耐蚀性好于针状铁素体X80管线钢,腐蚀程度较轻.在铜加速乙酸盐雾试验中,随着腐蚀时间的延长,两种管线钢的腐蚀程度加剧,点蚀程度增加,相比较针状铁素体X80管线钢,X80大变形管线钢点蚀坑数目较少,表现出优异的耐蚀性.X80大变形管线钢优异的耐蚀性是由于其微观组织为晶粒粗大的多边形铁素体和贝氏体/马氏体,铁素体中位错密度较低.
参考文献
[1] | 胥聪敏,陈勇,王玉柱,王礼平,罗金恒.X80管线钢在东南酸性土壤环境中的电化学腐蚀特征研究[J].热加工工艺,2009(24):1-4. |
[2] | 龚敏,张国虎,曾祥梅,张婷.X80管线钢在模拟土壤介质中的电化学行为[J].热加工工艺,2011(12):31-33. |
[3] | Hu Y Y;Zuo X R;Li R T et al.Comparison of two different rolling processes on microstructure and properties of ferrite-bainite dual-phase pipeline steels[J].Advanced Materials Research,2011,197-198:724-729. |
[4] | Zhou M;Du L X;Zhao Y F et al.Microstructure characteristics and mechanical properties of X80 pipeline steels[J].JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,2012,27(02):252-255. |
[5] | 张小立,冯耀荣,赵文轸,霍春勇,庄传晶,吉玲康,孟强.X80级管线钢的组织和力学性能[J].特殊钢,2006(03):11-13. |
[6] | 胥聪敏,李艳,张耀享.X80管线钢在洛阳土壤中的电化学腐蚀行为研究[J].热加工工艺,2011(10):13-16. |
[7] | 李红英,康巍,胡继东,刘洋.X70和X80管线钢的电化学腐蚀行为[J].材料热处理学报,2011(10):151-158. |
[8] | Van Boven G;Chen W;Rogge R .The role of residual stress in neutral PH stress corrosion cracking of pipeline steels.Part 1:Pitting and cracking occurrence[J].Acta Materialia,2007,55(01):29-42. |
[9] | Hamada AS;Karjalainen LP;Somani MC .Electrochemical corrosion behaviour of a novel submicron-grained austenitic stainless steel in an acidic NaCl solution[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):211-217. |
[10] | 夏大海,宋诗哲,王吉会,毕慧超,蒋雨轩,韩哲文.镀锡薄钢板在NaCl溶液中的腐蚀行为[J].中国有色金属学报(英文版),2012(03):717-724. |
[11] | Z. Y. Liu;X. G. Li;Y. F. Cheng.Understand the occurrence of pitting corrosion of pipeline carbon steel under cathodic polarization[J].Electrochimica Acta,2012:259-263. |
[12] | P.P. Sarkar;P. Kumar;Manas Kumar Manna;PC. Chakraborti .Microstructural influence on the electrochemical corrosion behaviour of dual-phase steels in 3.5% NaCl solution[J].Materials Letters,2005(19/20):2488-2491. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%