欢迎登录材料期刊网

材料期刊网

高级检索

碳/碳(C/C)复合材料CVI过程数值模拟采用简化的多步模型(Reduced multi-step),将气体流动和扩散、气相反应、表面反应等相结合,使用有限差分方法进行模拟.由于氢气对CVI过程有着很强的抑制作用,研究了甲烷加入氢气后作为前驱气体模拟的情况.在固定甲烷分压为20kPa的条件下,通过对氢气的分压(0kPa、0.4kPa、4kPa)的控制,计算得到沉积结束时预制体内部的密度分布,通过结果的对比验证有限差分方法在此过程中的有效性以及氢气对CVI过程的影响.

参考文献

[1] Becker A;Hütinger K J .Chemistry and kinetics of chemical vapor infiltration of pyrocarbon-Ⅳ.Investigation of methane/hydrogen mixtures[J].CARBO,1999,37(06):931.
[2] Becker A.;Huttinger KJ. .Chemistry and kinetics of chemical vapor deposition of pyrocarbon - IV - Pyrocarbon deposition from methane in the low temperature regime[J].Carbon: An International Journal Sponsored by the American Carbon Society,1998(3):213-224.
[3] Cedric Descamps;Gerard L. Vignoles;Olivier Feron .Correlation Between Homogeneous Propane Pyrolysis and Pyrocarbon Deposition[J].Journal of the Electrochemical Society,2001(10):C695-C708.
[4] Norinaga K;Deutschmann O .Detailed kinetic modeling of gas-phase reactions in the chemical vapor deposition of carbon from light hydrocarbons[J].Industrial & Engineering Chemistry Research,2007(11):3547-3557.
[5] 侯向辉,李贺军,刘应楼,康沫狂.单向碳/碳复合材料ICVI致密化机理研究[J].西北工业大学学报,1999(02):221-225.
[6] 侯向辉,李贺军,李克智,康沫狂.CVI制备碳/碳复合材料致密化行为模拟研究[J].兵器材料科学与工程,1999(02):28-33.
[7] Hou Xianghui;Li Hejun;Chen Yixi .Modeling of chemical vapor infiltration process for fabrication of carbon-carbon composites by finite difference methods[J].Carbon: An International Journal Sponsored by the American Carbon Society,1999(4):669-677.
[8] 姜开宇,李贺军,李克智.C/C复合材料热梯度CVI工艺的数值模拟研究[J].复合材料学报,2000(04):84.
[9] 姜开宇,李贺军,李克智.2D碳/碳复合材料CVI过程的数值模拟研究[J].宇航学报,1999(04):104-107.
[10] 姜开宇,李贺军,侯向辉,李克智.碳基及陶瓷基复合材料CVI工艺数值模拟的相关数学模型[J].宇航材料工艺,1999(03):42-45.
[11] 姜开宇,李贺军,侯向辉,李克智.轴对称C/C复合材料件等温CVI过程的数值模拟研究[J].西北工业大学学报,2000(04):665-668.
[12] 龙莹 .预制体孔隙结构对CVI过程及材料性能的影响[D].中南大学,2008.
[13] 肖鹏,徐永东,张立同,成来飞.优化CVI反应器气体流场的可视化研究[J].流体力学实验与测量,2000(02):88-91.
[14] 肖鹏,熊翔,黄伯云.化学气相浸渗反应器内气体流场的数值模拟[J].中南大学学报(自然科学版),2005(05):761-765.
[15] 肖鹏,李娣,徐永东,黄伯云.CVI工艺过程中气体传质模型与计算[J].航空材料学报,2002(01):11-15.
[16] Weigang Zhang;Klaus J.Huttinger .Chemical vapor infiltration of carbon - revised Part I: Model simulations[J].Carbon: An International Journal Sponsored by the American Carbon Society,2001(7):1013-1022.
[17] LI Kezhi,LI Hejun,JIANG Kaiyu,HOU Xianghui.Numerical simulation of isothermal chemical vapor infiltration process in fabrication of carbon-carbon composites by finite element method[J].中国科学E辑(英文版),2000(01):77-85.
[18] Hejun Li;Aijun Li;Ruicheng Bai .Numerical simulation of chemical vapor infiltration of propylene into C/C composites with reduced multi-step kinetic models[J].Carbon: An International Journal Sponsored by the American Carbon Society,2005(14):2937-2950.
[19] Modeling and simulation of materials synthesis: Chemical vapor deposition and infiltration of pyrolytic carbon[J].Composites science and technology,2008(5):p.1097.
[20] Li AJ;Deutschmann O .Transient modeling of chemical vapor infiltration of methane using multi-step reaction and deposition models[J].Chemical Engineering Science,2007(18/20):4976-4982.
[21] Zhang WG.;Hu ZJ.;Huttinger KJ. .Chemical vapor infiltration of carbon fiber felt: optimization of densification and carbon microstructure[J].Carbon: An International Journal Sponsored by the American Carbon Society,2002(14):2529-2545.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%