在含FeSO_4·7H_2O_2、Na_2WO_4·2H_2O、NaH_2PO_22·H_2O、Na_3C_6H_5O_7·2H_2O、C_6H_8O_7·H_2O、NH_3·H_2O和苯亚磺酸钠的碱性镀液中,电沉积得到Fe-W-P三元合金,分析了不同镀液成分时所得镀层的化学组成,讨论了温度、pH、电流密度及NH_3·H_2O用量对镀层沉积速率和显微硬度的影响.结果表明:除NaH_2PO_2H_2O外,镀液中其他组分对镀层组成均有显著影响;工艺参数的改变对镀层沉积速率和显微硬度有一定影响,NH_3·H_2O体积分数对沉积速率的影响尤其显著.电沉积所得Fe-W-P合金镀层具有典型的非晶态结构,其耐蚀性略优于00Cr17Ni14Mo2不锈钢.
A Fe-W-P ternary alloy was electrodeposited in an alkaline bath containing FeSO_4·7H_2O, Na_2WO_4·2H_2O,NaH_2PO_2·H_2O, Na_3C_6H_5O_7·2H_2O, C_6H_8O_7·H_2O, NH_3·H_2Oand sodium benzenesulfinate. The chemical compositions of the deposits prepared with different bath compositions were analyzed. The effects of process parameters, such as temperature, pH, current density and NH_3·H_2O dosage, on the deposition rate and microhardness of deposit were studied. The results showed that each component of the bath except NaH_2PO_2·H_2O has a great effect on the composition of Fe-W-P alloy deposit. The deposition rate and micro-hardness of deposit are affected by the variation of process parameters to a certain degree. Particularly, the volume fraction of NH3"H20 in bath has a significant effect on the deposition rate of alloy. The Fe-W-P ternary alloy coating has a typical amorphous structure and its corrosion resistance is better than 00Cr17Ni14Mo2 stainless steel.
参考文献
| [1] | 王玲玲,孟岩,黄桂芳.Fe-P合金化学镀工艺及其耐蚀性研究[J].湖南大学学报（自然科学版）,2005(06):78-81. |
| [2] | 李庆伦;俞春福;崔水植 .电镀Fe-P非晶合金研究现状[J].表面技术,1999,28(01):4-5. |
| [3] | 俞春福,崔永植,李庆伦.电沉积非晶Fe-P合金镀层强化机理的研究[J].材料保护,1999(09):3-4. |
| [4] | 姚素薇;赵水林;任丽彬 等.非晶态Fe-W合金镀层的表面改性[J].应用化学,1995,12(04):32-35. |
| [5] | 姚素薇;赵水林;郭鹤桐 等.Fe-W非晶态镀层耐腐蚀机理的研究[J].中国腐蚀与防护学报,1993,13(04):350-355. |
| [6] | 姚素薇.电沉积Fe-W非晶态合金的研究[J].材料保护,1992(05):4. |
| [7] | 胡国荣,杨凯华,汤凤林,金继红.金刚石表面电镀铁钨合金的研究[J].电镀与涂饰,1999(02):7-9. |
| [8] | 欧阳义芳,王玲玲,廖树帜.化学镀Fe-Mo-B和Fe-W-B合金的耐蚀性能[J].广西科学,1997(04):282-284. |
| [9] | 陈红梅,钟夏平.化学镀Fe-W-P合金的工艺和镀层的形貌研究[J].广西大学学报(自然科学版),2005(04):306-309. |
| [10] | 张远声.电镀非晶态Fe-W-P合金工艺研究[J].电镀与精饰,1998(01):9. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%