为了实现热轧宽带钢板形的高精度控制,根据宽带钢热连轧精轧机组上游机架控制凸度与下游机架控制平坦度的特性,在首钢迁钢1580 mm热连轧生产线的精轧机组开发并应用了成套辊形配置技术.在F1机架工作辊采用负凸度辊形,加强带钢轧制过程的对中；在F2到F4机架工作辊应用低轴向力CVC辊形,对带钢进行凸度调控；在F5到F7机架工作辊上采用负凸度辊形,辅以长行程的工作辊周期性窜辊,均匀轧辊磨损,控制带钢的平坦度；在所有机架的支撑辊上采用VCR变接触式辊形,增加机架的横向刚度.采用此辊形配置后,带钢的板形控制精度达95％以上,同时,改善了带钢轧制稳定性,延长了轧制计划长度,实现了一定范围的自由规程轧制.
参考文献
| [1] | 杨荃;陈先霖;徐耀寰 等.应用变接触长度支撑辊提高板形综合调控能力[J].钢铁,1995,30(02):48. |
| [2] | 何安瑞,杨荃,陈先霖,赵林,徐延强.变接触轧制技术在热带钢轧机上的应用[J].钢铁,2007(02):31-34. |
| [3] | 连家创,戚向东,岳晓丽,杨自行,王佑林.最优辊型技术的开发和应用[J].钢铁,2007(10):60-63. |
| [4] | Shohet K N;Townsend N A .Roll Bending Methods of Crown Control in Four-High Plate Mills[J].Journal of the Iron and Steel Institute,1969,206(11):1088. |
| [5] | X. D. Wang;F. Li;B. H. Li;G. S. Zhu;B. Li;B. H. Zhang .VCR back-up roll and negative work roll contour design for solving roll spalling and transfer bar profile problems in hot strip mill[J].Ironmaking & Steelmaking: Products and applications,2010(8):633-640. |
| [6] | Wang X D;Yang Q;Li F.Design and Application of Variable Contact Roll Contour on Backup Roll of Finishing Stand at a Hot Strip Mill[A].San Francisco CA,2009 |
| [7] | Bald W;Beiseman G;Feldmann H.Continuous Variable Crown (CVC) Rolling[A].Warrendale:Association for Iron and Steel Technology,1987 |
| [8] | 王晓东,李飞,李本海,朱国森,金永春.变接触支持辊辊形及辊形配置技术在宽带钢热连轧粗轧机组的应用[J].钢铁,2010(07):47-51,56. |
| [9] | CHEN Xian-lin;ZOU Jia-xiang.A Specialized Finite Element Model for Investigating Controlling Factors Affecting Behavior of Rolls and Strip Flatness[A].Deauville,1987 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%