利用锻造镦粗工艺制备了高横向塑性Mo-La2O3棒材,并检测了其在退火过程中横向弯曲性能,观察了其组织结构,利用SEM进行了断口形貌分析.结果表明:Mo-La2O3棒经锻造镦粗变形85%后横向具有较好的塑性,延伸率达到了2%,在退火过程中横向塑性逐渐升高,在1200℃时延伸率达到10%以上,经1570℃退火1 h后,合金发生了再结晶,此时延伸率为1.5%;Mo-La2O3棒中形成了大量的位错胞亚结构,胞内有大量的位错缠结在一起,这些位错还被La2O3钉扎;Mo-La2O3棒经1200℃退火后,断口有"分层"现象,且断口上具有明显的河流状花样和解理台阶,断裂面上伴有大量塑性变形的韧带和撕裂岭.
参考文献
| [1] | Mario Shimizu;Katsuya Itoh;Hitoshi Sato .Solar thermal thrustor made of single crystal molybdenum[J].Acta Astronautica,1997,41(I):23. |
| [2] | Mrotzek T;Hoffmann A;Martin U .Hardening mechanisms and recrystal]ization behaviour of several molybdenum alloys[J].International Journal of Refractory Metals and Hard Materials,2006,24:298. |
| [3] | Koval A Yu;Vasilev A D;Firstov S A .Fracture toughness of molybdenum sheet under brittle-ductile transition[J].International Journal of Refractory Metals and Hard Materials,1997,15(04):223. |
| [4] | Kumar A;Eyre B L .Grain boundary segregation and intergranular fracture in molybdenum[J].Proceedings of the Royal Society of London,1980,A370:431. |
| [5] | Yosizaws Naoki;Hiranka Yutaka;Kohi Seiji .Low-temperature fracture behavior of Mo alloys with a small addition of nickel or palladium source[J].Journal of the Japanese Society of Powder and Powder Metallurgy,2000,47(08):824. |
| [6] | Tetsuji Hoshika;Yutaka Hiraoka .Effect of carbon addition on the strength and ductility of doped molybdenum[J].粉体および粉末冶金,1999(5):472-477. |
| [7] | Hiraoka;Yutaka .Effect of rhenium and carbon additions on low-temperature fracture behavior of molybdenum[J].Journal of the Japan Institute of Metals,1992,56(02):161. |
| [8] | Zhang Jiuxing;Zhou Meiling;Liu Danmin .Fracture toughness of sintored Mo-La2O3 alloy and the toughening mechanisms[J].International Befractory Metals and Hard Materials,1999,17:405. |
| [9] | Zhou Meiling;Li Jun;Zuo Tieyong .Microstructure and properties of molybdenum wires doped with La[J].Transaction of Nonferrous Society of China,1994,4(03):57. |
| [10] | 罗丰华,周美玲,左铁镛.6T51高频加热电子管用碳化La2O3-Mo阴极的研究[J].稀有金属材料与工程,2003(01):58-62. |
| [11] | 王德志,刘心宇,周美玲.Mo-La2O3烧结坯的韧化机制研究[J].粉末冶金技术,2002(02):75-78. |
| [12] | Wadsworth J;Packer C M;Chewoy P M;Coons W C .A microstructure investigation of the origin of brittle behavior in the transverse direction in Mo-based alloy bars[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1984,15A(09):1741. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%