欢迎登录材料期刊网

材料期刊网

高级检索

采用双层辉光离子渗金属技术,在纯铜表面形成均匀的渗钛层.对离子渗钛试样和纯铜试样在400℃和700℃进行了高温氧化对比实验,分别给出了它们的氧化动力学曲线,用扫描电子显微镜观察分析氧化表面形貌,结果表明纯铜表面离子渗钛后提高了高温抗氧化的性能,降低了氧化速率,离子渗钛层的氧化膜致密,对继续氧化有阻碍作用.

Double glow discharge is applied to pure copper substrate to obtaintitanizing alloying layer.The high temperature oxidation resistance of the plasma titanizing samples at 400℃ and 700℃ wasinvestigated.The oxidation kineticscurve was worked out.The morphologies of oxidation surface were observed and analyzed with a scanning electron microscope and the oxidation mechanism was ssed.The results show that plasma titanizing on copper surface can improve greatly the high temperatureoxidation resistance of copper.The oxidation rate of copper is less than that of plasma titanizing.The oxidation film of plasma titanizing sample is very dense and is not easily exfoliated.The dense oxidation film prevents the copper from more oxidation.

参考文献

[1]
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%