作为铸造过程中最常见且较严重的缺陷,热裂对双辊铸坯的质量具有重要的影响.在对热裂形成机理进行总结与分析的基础上,结合双辊铸造过程中热裂的形成及其主要影响因素,从工艺上对热裂的控制进行探讨与综述,提出在双辊铸造热裂研究中有待加强的方面.
参考文献
| [1] | Y.K. Shin;T. Kang;T. Reynolds .Development of twin roll strip caster for sheet steels[J].Ironmaking & Steelmaking: Products and applications,1995(1):35-44. |
| [2] | Shibuya K;Ozawa M .Strip casting techniques for steel[J].ISIJ International,1991,31(07):661. |
| [3] | 汪凌云,范永革,黄光杰,黄光胜,潘复生,刘正宏.AZ31B镁合金板材的织构[J].材料研究学报,2004(05):466-470. |
| [4] | F. H. Froes;D. Eliezer;E. Aghion .The science, technology, and applications of magnesium[J].JOM,1998(9):30-34. |
| [5] | 丁培道,蒋斌,杨春楣,方亮.薄带连铸技术的发展现状与思考[J].中国有色金属学报,2004(z1):192-196. |
| [6] | 李华伦;黄育宏 .用于镁合金板材生产的镁合金双辊连续铸造系统[P].中国,ZL03118572.X,2003-11-19. |
| [7] | 娄花芬,李周,李宏磊,马可定,李向宇,汪明朴.变形镁合金连续铸轧技术研究进展[J].材料导报,2005(04):58-60,70. |
| [8] | 李庆春.铸件形成理论基础[M].北京:机械工业出版社,1982 |
| [9] | Borland J C.Fundamentals of solidification cracking in welds:Part 1[J].Weld Metal Fabrication,1979(01):19. |
| [10] | 周家荣.高强变形铝合金成分对铸锭裂纹倾向性的影响——兼谈铸锭冷裂纹和热裂纹的机制[A].广州,2006 |
| [11] | Wray P J .The geometry of two-phase aggregates in which the shape of the second phase is determined by its dihedral angle[J].Acta Metall,1976,24(02):125. |
| [12] | Borland J C.Fundamentals of solidification cracking in welds:Part 2[J].Weld Metal Fabrication,1979(03):99. |
| [13] | 曹禄华;丁浩.热裂纹的电子显微分析[J].铸造技术,1997(01):47. |
| [14] | Clyne T W;Davies G J .The influence of composition on solidification cracking susceptibility in binary alloy systems[J].British Foundryman,1981,74:65. |
| [15] | 陈光昀;刘旭麟;金蕴琳.ZQS-2000型双试棒合金热裂--线收缩仪的设计及实验研究铸造[J].铸造,1998(01):13. |
| [16] | 王业双 .MgAl合金的热裂行为研究[D].上海:上海交通大学,2002. |
| [17] | Singer A R E;Cottrell S A .Properties of the aluminium-silicon alloys at temperatures in the region of the solidus[J].JOURNAL OF METALS,1947,73:33. |
| [18] | Sigworth G K .Hot tearing of metals[J].AFS Transactions,1996,155:1053. |
| [19] | Davies V de L.The influence of grain size on hot tearing[J].British Foundryman,1970(04):93. |
| [20] | Oya S;Fujii T;Otraki M et al.Solidified structure and hot tearing of Al-4.5 ％Cu alloys[J].Light Metals,1984,34:511. |
| [21] | Saveiko V N .Theory of hot tearing[J].Russ Casting Production,1961,11:453. |
| [22] | 陈平昌.材料成形原理[M].北京:机械工业出版社,2001 |
| [23] | Pellini W S .Strain theory of hot tearing[J].Foundry,1952,80:199. |
| [24] | Dodd R A .Hot-tearing of castings:A review of literature[J].Foundry Trade J,1956,101:31. |
| [25] | Borland J C .Generalized theory of super-solidus cracking in welds (and castings)[J].British Weld J,1960,7(08):508. |
| [26] | Apblett W R;Pellini W S .Factors which influence weld hot cracking[J].Weld Res,1954,33:83. |
| [27] | 陈绪宏,丁培道,杨春楣.双辊快速凝固AZ31镁合金薄带试验研究[J].轻合金加工技术,2003(05):19-22. |
| [28] | 康向东,邸洪双,张晓明.双辊铸轧薄带钢裂纹形成原因分析[J].材料与冶金学报,2002(02):106-109. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%