采用双螺杆挤出机制备了聚丙烯(PP)/回收聚酯(PET),回收PET/相容剂和不同相容剂增容PP/回收PET共混物,研究了以上共混物的剪切黏度、剪切应力与剪切速率的关系.结果表明,PP剪切黏度随回收PET含量增加而降低,剪切速率越高,剪切黏度降低越明显,具有典型的剪切变稀特性.加入PP-g-MA能提高PP/回收PET共混物剪切黏度,但加入PP-g-GMA会降低PP/回收PET共混物剪切黏度.PP/回收PET共混物剪切应力随r-PET含量增加而降低.PP-g-MA使回收PET/PP共混物剪切应力增大,但PP-g-GMA使共混物剪切应力降低.
参考文献
[1] | Natalie Zdrazilova;Berenika Hausnerova;Petr Saha;Takeshi Kitano .Rheological Behaviour of PP/PET and Modified PP/PET Blends.I.Steady State Flow Properties[J].Polymers & Polymer Composites,2003(6):487-504. |
[2] | Natalie Zdrazilova;Berenika Hausnerova;Takeshi Kitano;Petr Saha .Rheological Behaviour of PP/PET and Modified PP/PET Blends.II.Dynamic Viscoelastic Properties[J].Polymers & Polymer Composites,2004(5):433-447. |
[3] | Chiu HT;Hsiao YK .Compatibilization of poly(ethylene terephthalate)/polypropylene blends with maleic anhydride grafted polyethylene-octene elastomer[J].Journal of Polymer Research,2006(2):153-160. |
[4] | Heino M.;Hietaoja P.;Seppala J.;Kirjava J. .COMPATIBILIZATION OF POLYETHYLENE TEREPHTHALATE/POLYPROPYLENE BLENDS WITH STYRENE-ETHYLENE/BUTYLENE-STYRENE (SEBS) BLOCK COPOLYMERS[J].Journal of Applied Polymer Science,1997(2):241-249. |
[5] | Tao YJ;Mai KC .Non-isothermal crystallization and melting behavior of compatibilized polypropylene/recycled poly(ethylene terephthalate) blends[J].European Polymer Journal,2007(8):3538-3549. |
[6] | 陈蕾,喻爱芳,胡祖明,刘兆峰.PMMA-PET共混体系流变性能[J].高分子材料科学与工程,2003(03):152-155. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%