采用Co包覆Al2O3/TiC微米级、纳米级粉料进行了不同Co含量、不同烧结温度的热压烧结实验.综合分析和对比了两种不同粒径包覆粉体的烧结结果,结果发现纳米级的粉体烧结效果优于微米级粉体的烧结效果.综合力学性能最佳的纳米级复相陶瓷材料的硬度为HRA92.7,抗弯强度σf为782 Mpa,断裂韧性KIC为7.81 Mpa·M1/2.利用SEM观察采取综合力学性能最佳的ATC纳米复合材料制备工艺制备的Al2O3、Al2O3/TiC和ATC的断口,可以看出Al2O3、Al2O3/TiC主要以沿晶断裂为主,而ATC为沿晶与穿晶混合断口,并从ATC断口,发现形成了晶内型结构,观察到了裂纹曲折的扩展路径以及裂纹的分叉、偏转、桥联这些有助于材料强度和韧性提高的现象.
参考文献
| [1] | 卢金山,高濂,归林华,郭景坤.Al2O3/Ni包裹粉体的制备、烧结行为及其显微结构研究[J].无机材料学报,2001(02):277-282. |
| [2] | Liden E.;Eklund L.;Nyberg B.;Carlsson R.;Carlstrom E. .HOMOGENEOUS DISTRIBUTION OF SINTERING ADDITIVES IN LIQUID-PHASE SINTERED SILICON CARBIDE[J].Journal of the American Ceramic Society,1995(7):1761-1768. |
| [3] | Djuricic B;Mcgarry D;Pickring S .The Preparation of Ultrafine Ceria-stabilized Zirconia Particles Coated with Yittria[J].Journal of Materials Science Letters,1993,12:1320. |
| [4] | 杨静漪,张巨先,蔺玉胜,侯耀永.包覆法添加烧结助剂制备A12O3/SiCp复相陶瓷[J].青岛化工学院学报(自然科学版),2000(03):226-229. |
| [5] | Pemilla Petterssonettersson;Mats Johnsson .Thermal Shock Properties of Alumina Reinforced with Ti (CN) Whiskers[J].Journal of the European Ceramic Society,2003,23:309-313. |
| [6] | Li H.;Sun JL.;Huang LP. .Effects of ductile cobalt on fracture behavior of Al2O3-TiC ceramic[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):17-20. |
| [7] | 彭晓峰;黄校先;张玉峰 .高性能细晶粒氧化铝陶瓷材料的制备与研究[J].无机材料学报,1998,13(03):327-332. |
| [8] | Krstie V V;Nicholson P S;Hoagland R G .Toughening of Glasses by Metallic Particles[J].Journal of the American Ceramic Society,1981,64(09):499. |
| [9] | Marshall D B;MorrisWL .Toughening Mechanisms in Cemented Carbides[J].Journal of the American Ceramic Society,1990,73(10):2938. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%