欢迎登录材料期刊网

材料期刊网

高级检索

双极板是质子交换膜燃料电池(PEMFC)的核心组件之一,占电池组重量和成本的大部分。不锈钢由于具有强度高、导电、传热性好以及耐腐蚀等优点,因此被作为双极板材料。然而,在PEMFC环境下,不锈钢会发生腐蚀并且表面会产生高电阻钝化膜,从而降低电池性能。为此,国内外研究者对不锈钢双极板的腐蚀与表面处理展开了广泛的研究,本文对此进行了详细阐述。

The bipolar plate is one of key core components of the proton exchange membrane fuel cell (PEMFC), accounting for a significant part of total weight and cost of the PEMFC stack. Stainless steels have high strength, superior conductivity and thermal conductivity, good corrosion resistance, so they are often used as bipolar plate material. However, in PEMFC environment, stainless steels will be corroded and can produce high resistance passive film, and thus reduces the cell performance. Therefore, the corrosion and surface treatment of stainless steel bipolar plates are extensively investigated. In this paper, the progress in research is described in detail.

参考文献

[1] Haruki Tsuchiya;Osamu Kobayashi .Mass production cost of PEM fuel cell by learning curve[J].International journal of hydrogen energy,2004(10):985-990.
[2] N. de las Heras;E. P. L. Roberts;R. Langton;D. R. Hodgson .A review of metal separator plate materials suitable for automotive PEM fuel cells[J].Energy & environmental science: EES,2009(2):206-214.
[3] Applicability of extra low interstitials ferritic stainless steels for bipolar plates of proton exchange membrane fuel cells[J].Journal of Power Sources,2010(21):P.7181.
[4] Young-Hoon Yun;Sung-Churl Choi .Surface modification of stainless steel bipolar plates for PEMFC (proton exchange membrane fuel cell) application[J].Journal of electroceramics,2009(2/4):462-467.
[5] Cunningham B;Baird DG .The development of economical bipolar plates for fuel cells[J].Journal of Materials Chemistry: An Interdisciplinary Journal dealing with Synthesis, Structures, Properties and Applications of Materials, Particulary Those Associated with Advanced Technology,2006(45):4385-4388.
[6] 熊麟,秦少雄,颜学敏,苏高申.质子交换膜燃料电池双极板材料研究进展[J].能源研究与信息,2010(01):1-6.
[7] CNTs nanostructuring effect on the properties of graphite composite bipolar plate[J].International journal of hydrogen energy,2010(9):4195.
[8] Allen Hermann;Tapas Chaudhuri;Priscila Spagnol .Bipolar plates for PEM fuel cells: A review[J].International journal of hydrogen energy,2005(12):1297-1302.
[9] Joong Hee Lee;Yun Ki Jang;Chang Eui Hong;Nam Hoon Kim;Peng Li;Hong Ki Lee .Effect of carbon fillers on properties of polymer composite bipolar plates of fuel cells[J].Journal of Power Sources,2009(2):939-943.
[10] The preparation technique optimization of epoxy/compressed expanded graphite composite bipolar plates for proton exchange membrane fuel cells[J].Journal of Power Sources,2010(16):p.5312.
[11] Corrosion protection of type 304 stainless steel bipolar plates of proton-exchange membrane fuel cells by doped polyaniline coating[J].Journal of Power Sources,2010(7):1914.
[12] M.P. Brady;B. Yang;H. Wang .The Formation of Protective Nitride Surfaces for PEM Fuel Cell Metallic Bipolar Plates[J].JOM,2006(8):50-57.
[13] Localised corrosion processes of austenitic stainless steel bipolar plates for polymer electrolyte membrane fuel cells[J].Journal of Power Sources,2010(11):3590.
[14] Masanobu Kumagai;Seung-Taek Myung;Shiho Kuwata;Ryo Asaishi;Hitoshi Yashiro .Corrosion behavior of austenitic stainless steels as a function of pH for use as bipolar plates in polymer electrolyte membrane fuel cells[J].Electrochimica Acta,2008(12):4205-4212.
[15] 李谋成,曾潮流,林海潮,吴维(山文),曹楚南.316不锈钢在F-/Cl-酸性溶液中的腐蚀行为[J].中国腐蚀与防护学报,2002(03):162-166.
[16] A.-M. Lafront;E. Ghali;A. T. Morales .Corrosion behavior of two bipolar plate materials in simulated PEMFC environment by electrochemical noise technique[J].Electrochimica Acta,2007(15):5076-5085.
[17] Masanobu Kumagai;Seung-Taek Myung;Shiho Kuwata;Ryo Asaishi;Hitoshi Yashiro .Corrosion behavior of austenitic stainless steels as a function of pH for use as bipolar plates in polymer electrolyte membrane fuel cells[J].Electrochimica Acta,2008(12):4205-4212.
[18] Chih-Yeh Chung;Shi-Kun Chen;Po-Jen Chiu;Ming-Hsin Chang;Tien-Tsai Hung;Tse-Hao Ko .Carbon film-coated 304 stainless steel as PEMFC bipolar plate[J].Journal of Power Sources,2008(1):276-281.
[19] Performance of a proton exchange membrane fuel cell stack using conductive amorphous carbon-coated 304 stainless steel bipolar plates[J].Journal of Power Sources,2010(20):P.7061.
[20] Tomokazu Fukutsuka;Takayuki Yamaguchi;Shin-Ichi Miyano;Yoshiaki Matsuo;Yosohiro Sugie;Zempachi Ogumi .Carbon-coated stainless steel as PEFC bipolar plate material[J].Journal of Power Sources,2007(1):199-205.
[21] Yu Fu;Guoqiang Lin;Ming Hou;Bo Wu;Zhigang Shao;Baolian Yi .Carbon-based Films Coated 316l Stainless Steelas Bipolar Plate For Proton Exchange Membrane Fuel Cells[J].International journal of hydrogen energy,2009(1):405-409.
[22] Shine Joseph;J.C. McClure;R. Chianelli;P. Pich;P.J. Sebastian .Conducting polymer-coated stainless steel bipolar plates for proton exchange membrane fuel cells (PEMFC)[J].International journal of hydrogen energy,2005(12):1339-1344.
[23] Y.J. Ren;C.L. Zeng .Effect of conducting composite polypyrrole/polyaniline coatings on the corrosion resistance of type 304 stainless steel for bipolar plates of proton-exchange membrane fuel cells[J].Journal of Power Sources,2008(2):524-530.
[24] 钱耀川,谭俊,石恭臣,胡仲翔.电沉积铅改性304不锈钢双极板在模拟PEMFC环境中的性能[J].南京工业大学学报(自然科学版),2009(05):47-51.
[25] 梁鹏,徐洪峰,刘明,卢璐,傅杰.镀银-石墨涂层316L不锈钢双极板的电化学性能测试及表征[J].物理化学学报,2010(03):595-600.
[26] Yu Fu;Ming Hou;Hongfeng Xu;Zhongjun Hou;Pingwen Ming;Zhigang Shao;Baolian Yi .Ag-polytetrafluoroethylene composite coating on stainless steel as bipolar plate of proton exchange membrane fuel cell[J].Journal of Power Sources,2008(2):580-584.
[27] 王文涛,吴博,李红凯,林国强,付宇,侯明,衣宝廉.PEMFC不锈钢双极板离子镀CrNX薄膜表面改性[J].电源技术,2009(05):371-374.
[28] 吴博,李红凯,林国强,付宇,候明,衣宝廉.不锈钢双极板电弧离子镀Cr1-xNx薄膜改性研究[J].金属学报,2009(09):1125-1129.
[29] 吴博,王文涛,张敏,付宇,林国强.不锈钢双极板表面电弧离子镀Cr/CrN/Cr薄膜研究[J].电源技术,2007(11):861-863.
[30] 王剑莉,孙俊才,田如锦,徐靖.表面改性不锈钢双极板的性能研究[J].电源技术,2007(09):725-727.
[31] Jong Seol Yoon;Jim Lee;Hae Jin Hwang;Chin Myung Whang;Ji-Woong Moon;Do-Hyeong Kim .Lanthanum oxide-coated stainless steel for bipolar plates in solid oxide fuel cells (SOFCs)[J].Journal of Power Sources,2008(2):281-286.
[32] 闫斌,陈宏霞,陈嘉宾,马学虎.SUS304不锈钢耐腐蚀性硅氧烷复合膜的研究[J].石油化工腐蚀与防护,2008(05):1-4.
[33] 狄志勇,何建平,周建华,孙盾,王涛.有机-无机自组装制备类荷叶结构超疏水涂层及其性能研究[J].无机材料学报,2010(07):765-769.
[34] Kiyoharu Tadanaga;Takayuki Fujii;Atsunori Matsuda .Micropatterning of SnO_2 thin films using hydrophobic-hydrophilic patterned surface[J].Ceramics International,2004(7):1815-1817.
[35] Chen AC;Peng XS;Koczkur K;Miller B .Super-hydrophobic tin oxide nanoflowers[J].Chemical communications,2004(17):1964-1965.
[36] 沈广霞,陈艺聪,林昌健.疏水型纳米TiO2膜的制备、表征及耐蚀性能研究[J].电化学,2004(01):65-69.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%