利用LS-DYNA有限元软件模拟了平头弹垂直冲击作用下平纹织物的动态响应,分析了织物的变形、纱线断裂、冲击载荷以及能量吸收特性,讨论了不同弹体冲击速度对织物动态响应的影响.结果表明:平头弹冲击作用下织物的破坏形式为弹体边缘的剪切破坏.在弹体贯穿织物过程中,纱线应变能、纱线动能和摩擦耗散能是弹体动能转变的主要能量形式.结果还表明,当弹体冲击速度小于临界速度时,织物吸收的能量随冲击速度的增加而增大,弹体冲击速度大于临界速度时织物吸收的能量逐渐降低.本文数值模拟结果与已有实验结果进行了对比,分析表明平头弹冲击织物时的横向偏移变形和吸能特性曲线均吻合较好.
参考文献
[1] | Ala Tabiei;Gaurav Nilakantan .Ballistic Impact of Dry Woven Fabric Composites: A Review[J].Applied Mechanics Reviews: An Assessment of the World Literature in Engineering Sciences,2008(1):1-13. |
[2] | 顾伯洪.织物弹道贯穿性能分析计算[J].复合材料学报,2002(06):92-96. |
[3] | Mehmet Karahan;Abdil Kus;Recep Eren .An investigation into ballistic performance and energy absorption capabilities of woven aramid fabrics[J].International journal of impact engineering,2008(6):499-510. |
[4] | V.B.C. Tan;C.T. Lim;C.H. Cheong .Perforation of high-strength fabric by projectiles of different geometry[J].International journal of impact engineering,2003(2):207-222. |
[5] | C.T. Lim;V.B.C. Tan;C.H. Cheong .Perforation of high-strength double-ply fabric system by varying shaped projectiles[J].International journal of impact engineering,2002(6):577-591. |
[6] | Y. Duan;M. Keefe;T.A. Bogetti;B.A. Cheeseman .Modeling friction effects on the ballistic impact behavior of a single-ply high-strength fabric[J].International journal of impact engineering,2005(8):996-1012. |
[7] | Y. Duan;M. Keefe;T.A. Bogetti;B.A. Cheeseman;B. Powers .A numerical investigation of the influence of friction on energy absorption by a high-strength fabric subjected to ballistic impact[J].International journal of impact engineering,2006(8):1299-1312. |
[8] | Y. Duan;M. Keefe;T. A. Bogetti;B. Powers .Finite element modeling of transverse impact on a ballistic fabric[J].International Journal of Mechanical Sciences,2006(1):33-43. |
[9] | V.B.C. Tan;T.W. Ching .Computational simulation of fabric armour subjected to ballistic impacts[J].International journal of impact engineering,2006(11):1737-1751. |
[10] | Bohong Gu;Jingyi Xu .Finite element calculation of 4-step 3-dimensional braided composite under ballistic perforation[J].Composites, Part B. Engineering,2004(4):291-297. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%