基于ALE算法和三维热弹黏塑性本构方程并考虑湍流的影响,模拟了连铸起步段低碳钢带液芯压下薄板坯的凝固行为、应力应变分布及变形情况.研究表明,薄板坯连铸液芯压下过程中对板坯的压缩作用主要由板坯中未凝固的部分(液芯部分)来承担,板坯凝固坯壳部分在板坯厚度方向的尺寸变化不大.连铸液芯压下过程中板坯不同位置处的应力不同,板坯在经过液芯压下辊前后,应力发生了较大的变化.在板坯近角部区域应力最大,窄面区域所承受的应力比宽面区域大.连铸液芯压下过程中板坯的等效应变与液芯压下量有关,液芯压下量越大,等效应变值越大,而且应变最大值出现在窄面,且随着时间而发生变化,在起步段的某一时刻(13.5 s)应变达到最大值,此时更易接近板坯的临界等效应变,从而诱发裂纹等缺陷.研究证实了对带液芯压下薄板坯连铸起步段开展瞬态数值分析的必要性.
参考文献
| [1] | 彭晓华.薄板坯连铸连轧的液芯压下技术[J].钢铁,1999(09):63-67. |
| [2] | Cremer B;Pawelski O;Rasp W .Rolling Characteristics of Continuously Cast Slabs With Liquid Core[J].Ironmaking and Steelmaking,1993,20(04):264. |
| [3] | 干勇,陈栋梁.薄板坯连铸液芯压下过程的数值仿真[J].钢铁,1999(06):27-31. |
| [4] | 逯洲威,蔡开科,张家泉.薄板坯连铸液芯铸轧铸坯变形特点[J].北京科技大学学报,1999(05):432. |
| [5] | 逯洲威,蔡开科.薄板坯连铸液芯铸轧过程的三维有限元分析[J].金属学报,2000(07):757-760. |
| [6] | 逯洲威,蔡开科.薄板坯连铸液芯铸轧过程铸坯的应力应变分析[J].北京科技大学学报,2000(04):303-306. |
| [7] | 逯洲威.薄板坯连铸工艺液芯压下的有限元分析[J].上海金属,2002(05):17-20. |
| [8] | 张立,王迎春,徐宏伟.薄板坯连铸连轧液芯压下工艺研究[J].宝钢技术,2009(04):6-12. |
| [9] | Wang Y F;Zhang L F .Transient Fluid Flow Phenomena During Continuous Casting:Part Ⅰ-Cast Start[J].ISIJ International,2010,50(12):1777. |
| [10] | Wang Y F;Zhang L F .Transient Fluid Flow Phenomena During Continuous Casting:Part Ⅱ-Cast Speed Change,Temperature Fluctuation,and Steel Grade Mixing[J].ISIJ International,2010,50(12):1783. |
| [11] | Bennon W D;Incropera F P .A Continuum Model for Momentum,Heat and Species Transport in Binary Solid-Liquid Phase Change Systems-I.Model Formulation[J].International Journal of Heat and Mass Transfer,1987,30(10):2161. |
| [12] | Launder B E;Sharma B I .Application of The Energy-Dissipation Model of Turbulence to The Calculation of Flow Near a Spinning Disc[J].International Journal of Heat and Mass Transfer,1974,1(02):131. |
| [13] | Fj(ae)r H G;Mortensen D;Hakonsen A.Coupled Stress,Thermal and Fluid Flow Modelling of the Start-Up Phase of Aluminium Sheet Ingot Casting[A].Warrendale,Pennsylvania,USA:The Minerals,Metals & Materials Society (TMS),1999:743. |
| [14] | Ghosh S;Kikuchi N .an Arbitrary Lagrangian-Eulerian Finite Element Method for Large Deformation Analysis of Elastic-Viscoplastic Solids[J].Computer Methods in Applied Mechanics and Engineering,1991,86(02):127. |
| [15] | Ghosh S .Finite Element Simulation of Some Extrusion Processes Using Arbitrary Lagrangian-Eulerian Description[J].J Mater Shaping Technol,1990,8(01):53. |
| [16] | Mortensen D;Henriksen B R;M'Hamdi M.Coupled Modelling of Air-gap Formation and Surface Exudation During Extrusion Ingot DC-casting[A].Warrendale,Pennsylvania,USA:The Minerals,Metals & Materials Society(TMS),2008:773. |
| [17] | F(ae)r H G;Mo A .ALSPEN-A Mathematical Model for Thermal Stresses in DC Casting of Aluminium Billets[J].Modeling Identification and Control,1993,14(04):193. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%