通过模拟压水堆一回路水环境,对304奥氏体不锈钢在320℃含Zn分别为60和120 μg/kg两种高温溶液中进行了600 h的腐蚀实验,对腐蚀后的试样表面进行了X射线光电子能谱分析(XPS)分析.结果表明,试样在含锌溶液中形成了主要化学成分为Zn(Cr,Fe)2O4的致密氧化膜;提高溶液中Zn的浓度,试样的腐蚀速率降低,氧化膜中Fe含量增多.
参考文献
[1] | Lister D H,Davidson R D,McAlpine E.The mechanism and kinetics of corrosion product release from stainless steel in lithiated high temperature water[J].Corros.Sci.,1987,27(2):113 |
[2] | Robertson J.The mechanism of high temperature aqueous corrosion of steel[J].Corros.Sci.,1989,29(11):1275 |
[3] | Terachi T,Yamada T,Miyamoto T,et al.Corrosion behavior of stainless steels in simulated PWR primary water-Effect of chromium content in alloys and dissolved hydrogen[J].J.Nucl.Sci.Technol.,2008,45(10):975 |
[4] | Lister D H.Mechanisms of zinc interaction with oxide films in hightemperature water[A].Presentation at EPRI Meeting[C].Toronto,2004 |
[5] | Lister D H.Activity transport and corrosion processes in PWRs[J].Nucl.Energy,1993,32:103 |
[6] | Stefanov P,Stoychev D,Stoycheva M,et al.XPS and SEM studies of chromium oxide films chemically formed on stainless steel 316 L[J].Mater.Chem.Phys.,2000,65(2):212 |
[7] | Huang J,Liu X,Han E H,et al.Influence of Zn on oxide films on Alloy 690 in borated and lithiated high temperature water[J].Corros.Sci.,2011,53(10):3254 |
[8] | Machet A,Galtayries A,Marcus P,et al.XPS study of oxides formed on nickel-base alloys in high-temperature and high-pressure water[J].Surf.Interface Anal.,2002,34(1):197 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%