As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion.
参考文献
| [1] | 张书桥.干式切削加工技术及其应用[J].工具技术,2002(02):29-32. |
| [2] | Yang X F.Dry cutting key technology and its applications[J].Machinery Engineer,2003(07):9-11. |
| [3] | ZHAO Z S .Dry cutting-a perfectmetal cutting method[J].Research and Exploitation,2001,39:26-28. |
| [4] | F. Klocke;T. Krieg;K. Gerschwiler;R. Fritsch;V. Zinkann;M. Pohls;G. Eisenblatter .Improved cutting processes with adapted coating systems[J].CIRP Annals,1998(1):65-68. |
| [5] | Klocke F;Krieg T .Coated Tools for Metal Cutting-Features and Application[J].Annals of the CIRP,1999,48(02):515-525. |
| [6] | Fortuna SV.;Perry AJ.;Matossian JN.;Shulepov IA.;Sharkeev YP. .Microstructural features of wear-resistant titanium nitride coatings deposited by different methods[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2000(0):512-517. |
| [7] | Smith I J;Gillibrand J;Bbrooks J S et al.Dry cutting performance of HSS twist drills coated with improved TiAlN[J].Surface and Coatings Technology,1997,90:164-171. |
| [8] | Smith I J;Munz W D;Donohue L A et al.Improved Ti1-xAlx N PVD coating for dry high speed cutting operations[J].Surface Engineering,1998,14(01):37-41. |
| [9] | PalDey S;Deevi S C .Single layer and multilayer wear resistant coatings of ( Ti, Al) N: a review[J].Materials Science and Engineering,2003,A342:58-79. |
| [10] | Harris S G;Doyle E D;Vlasveld A C et al.Dry cutting performance viability through filtered are deposited coatings[J].Surface and Coatings Technology,2000,133 ～ 134:383-388. |
| [11] | Hermann A. Jehn .Multicomponent and multiphase hard coatings for tribological applications[J].Surface & Coatings Technology,2000(1/3):433-440. |
| [12] | Luo Q;Rainforth W M;Munz W D .Wear mechanisms of monolithic and multi-component nitride coatings grown by combined arc etching and unbalanced magnetron sputtering[J].Surface and Coatings Technology,2001,146 47:430-435. |
| [13] | Yang S;Li X;Teer D G .Properties and performance of CrTiAlN multiplayerhard coatings deposited using magnetron sputter ion plating[J].Surface and Coatings Technology,2003,90:391-396. |
| [14] | 张绪寿,余来贵,陈建敏.表面工程摩擦学研究进展[J].摩擦学学报,2000(02):156-160. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%