采用差示扫描量热（DSC）方法研究了聚对苯二甲酸乙二酯（PET）固相缩聚工艺过程中切片及粉尘的结晶熔融及降温结晶行为,研究表明,切片与粉尘呈现出不同的结晶行为,切片随工艺过程的进行,特性黏度增加,降温结晶能力减弱;而粉尘特性黏度增加的幅度更大,降温结晶能力增强;预结晶及结晶粉尘因摩擦形成了更高熔融温度（267.5℃）下的结晶;高的无机杂质的浓度,促进了粉尘的降温结晶成核;粉尘高的结晶能力,易造成后产品加工过程形成结晶斑点。
The crystallinity melting and cooling crystallization of chips and its powders from different stages of polyethylene terephthalate（PET） ~lid state polymerization （SSP） process have been researched by using differential scanning calorimetry （DSC） method. It shows that chip and powder have different crystallization behaviour. With proceeding of the process, the intrinsic viscosity of chip increases and the cooling crystallization ability of it decreases, while powder has a larger intrinsic viscosity increase than chip and a increase of cooling crystallization ability. Both pre-crystallizer and crystallizer powder form crystallinity at high melting temperature （267.5 ℃ ） due to friction. The high content inorganic component acts as the nucleating agent and accelerates crystallization. The high crystallization ability of powder in chips may form the crystallization spot during downstream processing.
参考文献
| [1] | 陈锦国,曹正俊,洪旭军,胡杰.瓶片质量与注塑工艺和制品质量的关系[J].合成技术及应用,2005(04):52-55. |
| [2] | 张军,沈希军,张建,冯连芳.聚酯切片结晶熔融粘结与固相缩聚工艺优化[J].高分子材料科学与工程,2010(05):1-4. |
| [3] | 李金霞,沈希军,冯连芳,张军,王嘉骏.固相缩聚反应温度与时间对PET结晶的影响[J].合成纤维工业,2006(03):18-20. |
| [4] | Fann DM.;Lee JY.;Huang SK. .DSC studies on the crystallization characteristics of poly(ethylene terephthalate) for blow molding applications[J].Polymer engineering and science,1998(2):265-273. |
| [5] | Y. Kong;J. N. Hay .Multiple melting behaviour of poly(ethylene terephthalate)[J].Polymer: The International Journal for the Science and Technology of Polymers,2003(3):623-633. |
| [6] | MEDELLIN-RODRIGUEZ F.J.;LOPEZ-GUILLEN R. .Solid-State Polymerization and Bulk Crystallization Behavior of Poly(ethylene terephthalate)(PET)[J].Journal of Applied Polymer Science,2000(1):78-86. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%