欢迎登录材料期刊网

材料期刊网

高级检索

以Ti粉、Al粉和CuO粉为原料,通过真空热压烧结工艺合成了Al2O3-Al6.1Cu1.2Ti2.7/TiAl复合材料,采用XRD、SEM及力学性能万能实验机分析研究了材料的相组成、微观结构及力学性能.结果表明:经过1000 ℃下热压2 h所得样品反应完全,复合材料基体主要由Al6.1Cu1.2Ti2.7与TiAl双相组成,Al2O3颗粒弥散分布于基体晶粒间.当原料配比中CuO含量为10wt%时材料弯曲强度达到最大值273.1 MPa;当CuO含量在14wt%时复合材料断裂韧性达到最大值6.7 MPa·m1/2.由于CuO的掺杂量增加,热压所得复合材料基体相组织呈现从块体到层状结构变化,自生Al2O3相呈现出由弥散分布到局部团聚现象变化.

参考文献

[1] Edward A. Loria .Gamma titanium aluminides as prospective structural materials[J].Intermetallics,2000(9/11):1339-1345.
[2] Su Yanqing;Guo Jingjie;Jia Jun .Composition control of a TiAl melt during the induction skull melting (ISM) process[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2002(1/2):261-266.
[3] 陈玉勇,李宝辉,孔凡涛.Y(0.3 at%)对Ti-45Al-5Nb合金铸态显微组织的影响[J].稀有金属材料与工程,2006(01):1-4.
[4] L.M. Peng;Z. Li;H. Li .Microstructural characterization and mechanical properties of TiAl-Al_2Ti_4C_2-Al_2O_3-TiC in situ composites by hot-press-aided reaction synthesis[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2006(1/2):100-106.
[5] Lee T K;Mosunov E I;Hwang S K.Consolidation of a gamma TiAl-Mn-Mo alloy by elemental powder metallurgy[J].Materials Science and Engineering,1997(04):128-131.
[6] 孔凡涛,陈子勇,田竞,陈玉勇.提高TiAl基合金室温塑性的方法[J].稀有金属材料与工程,2003(02):81-86.
[7] 张永刚.金属间化合物结构材料[M].北京:国防工业出版社,2001
[8] 艾桃桃,王芬,朱建锋.Al2O3/TiAl复合材料的原位合成及反应机制的研究[J].金属热处理,2007(04):38-42.
[9] 朱建锋,高积强,王芬,罗宏杰.原位反应合成TiN/Al2O3复合材料[J].稀有金属材料与工程,2007(z1):625-628.
[10] LIU Yong,HUANG Bai-yun,HE Yue-hui.Mechanism of non-isothermal reaction between elemental powders Ti and Al[J].中国有色金属学会会刊,2000(01):29.
[11] Dahms M;Jewett T J;Michaelsen C .Phase formation kinetics of titanium aluminides produced from elemental powder mixtures[J].Zeitschrift fur Metallkunde,1997,88(02):125-129.
[12] Fu EKY.;McShane HB.;Rawlings RD. .Reaction synthesis of titanium aluminides[J].Journal of Materials Science,2001(23):5537-5542.
[13] 李志强,韩杰才,赫晓东,张幸红.燃烧合成TiAl金属间化合物的反应机制[J].稀有金属材料与工程,2002(01):4-7.
[14] 马颖,郝远,寇生中,鲁学年.工艺参数对制备CuO与Al反应自生Al2O3增强铝基复合材料的影响[J].中国有色金属学报,2003(01):198-204.
[15] 寇生中;丁雨田;郝远 等.CuO/Al自生复合材料的反应动力学[J].金属学报,1995,31(10):853-855.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%