欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 宇航材料工艺
  4. Nb-Si基超高温合金的研究进展

宇航材料工艺 , 2013, 43(3): 12-18.

Nb-Si基超高温合金的研究进展

郑蕾 1, , 贾丽娜 2, , 张虎 3, , 徐惠彬 4,

1.北京航空航天大学,北京 100191

2.北京航空航天大学,北京 100191

3.北京航空航天大学,北京 100191

4.北京航空航天大学,北京 100191

关键词： Nb-Si , 超高温合金 , 力学性能 , 热处理

Progress in Nb-Si Intermetallics Based Ultra-High Temperature Alloys

Zheng Lei 1, , Jia Lina 2, , Zhang Hu 3, , Xu Huibin 4,

1.北京航空航天大学,北京 100191

2.北京航空航天大学,北京 100191

3.北京航空航天大学,北京 100191

4.北京航空航天大学,北京 100191

Keywords： Niobium-silicide , Ultra-high temperature alloys , Mechanical properties , Heat treatment

Nb-Si基超高温合金由于熔点高、密度低和优良的高温强度等特点受到广泛关注,极具作为下一代高推重比航空发动机和超然冲压发动机的热端部件用材料的潜力.本文主要介绍了国内外在合金化、粉末冶金、定向凝固和热处理工艺对Nb-Si基合金组织和性能影响等方面的研究现状,并展望了其发展趋势.

参考文献

[1] Bewlay B P;Jackson M R;Zhao J C et al.A review of very-high temperature Nb-silicide-based composites[J].Metallurgical and Materials Transactions,2003,34A(10):2043-2049.
[2] P.Guan,X.P.Guo,X.Ding,J.Zhang,L.M.Gao,K.Kusabiraki.DIRECTIONALLY SOLIDIFIED MICROSTRUCTURE OF AN ULTRA-HIGH TEMPERATURE Nb-Si-Ti-Hf-Cr-Al ALLOY[J].金属学报(英文版),2004(04):450-454.
[3] Ellen M. Heian;Jeffery C. Gibeling;Zuhair A. Munir .Synthesis and characterization of Nb_5Si_3/Nb functionally graded composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):168-174.
[4] Dimiduk D M;Subramanian P R;Mendiratta M G .Exploration of Nb-based advanced intermetallic materials[J].Acta Metallurgica Sinica,1995,8(4/6):519-522.
[5] 傅恒志;郭景杰;刘林.先进材料定向凝固[M].北京:科学出版社,2008:630.
[6] Bewlay B P;Jackson M R;Lipsitt H A .The balance of mechanical and environmental properties of a multielement Niobium-Niobium silicide-based in situ composite[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1996,27A:3801.
[7] Seiji Miura;Kenji Ohkubo;Tetsuo Mohri .Microstructural control of Nb-Si alloy for large Nb grain formation through eutectic and eutectoid reactions[J].Intermetallics,2007(5/6):783-790.
[8] W. A. Zinsser Jr.;J. J. Lewandowski .Fatigue crack growth behavior of Nb-10Si in-situ composites[J].Scripta materialia,1998(12):1775-1780.
[9] 金永元;大雕?卡内洛.铌@高温应用[M].北京:冶金工业出版社,2005:70-133.
[10] 张永刚;韩雅芳;陈国良.金属间化合物结构材料[M].北京:国防工业出版社,2001:914.
[11] JIANGBO SHA;HISATOSHI HIRAI;TATSUO TABARU .Mechanical Properties of As-Cast and Directionally Solidified Nb-Mo-W-Ti-Si In-Situ Composites at High Temperatures[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(1):85-94.
[12] 马朝利,笠间昭夫,田中良平,花田修治,康沫狂.Nb/Nb5Si3原位复合材料的开发研究[J].金属热处理学报,2000(02):83-88.
[13] Jiangbo Sha;Hisatoshi Hirai;Tatsuo Tabaru .Effect of carbon on microstructure and high-temperature strength of Nb-Mo-Ti-Si in situ composites prepared by arc-melting and directional solidification[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):282-289.
[14] JIANGBO SHA;HISATOSHI HIRAI;TATSUO TABARU .Toughness and Strength Characteristics of Nb-W-Si Ternary Alloys Prepared by Arc Melting[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(12):2861-2871.
[15] W. A. Ainsser Jr;J. J. Lewandowski .Effects of R-Ratio on the fatigue crack growth of Nb-Si(ss) and Nb-10Si in situ composites[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1998(6):1749-1757.
[16] Mendiratta M G;Lewandowski J J;Dennis M.Dimiduk .Strength and ductile-phase toughening in the two-phase Nb/Nb5Si3 alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1991,22A(07):1573-1577.
[17] 李伟,杨海波,单爱党,吴建生.Nb-10Si合金室温断裂韧性研究[J].航空学报,2005(01):103-106.
[18] 白新德;邱钦伦;甘东文 等.Nb在空气中的氧化动力学及成膜机制的研究[J].浙江大学学报,1998,38(06):73.
[19] Ma C L;Li J G;Tan Y et al.Effect of B addition on the microstructures and mechanical properties of Nb-16Si-10Mo-15W alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,384(1/2):377.
[20] Zelenitsas K;Tsakiropoulos P .Study of the role of Ta and Cr additions in the microstructure of Nb-Ti-Si-Al in situ composites[J].Intermetallics,2006,14(06):639.
[21] Zelenitsas K;Tsakiropoulos P .Study of the role of Al and Cr additions in the microstructure of Nb-Ti-Si in situ composites[J].Intermetallics,2005,13(02):1079.
[22] Geng Jie;Tsakiropoulos P;Shao Guosheng .A study of the effects of Hf and Sn additions on the microstrncture of Nbss/Nb5Si3 based in situ composites[J].Intermetallics,2007,15(01):69.
[23] Kima Jin Hak;Tabaru Tatsuo;Sakamoto Michiru et al.Mechanical properties and fracture behavior of an Nbss/Nb5Si3 insitu composite modified by Mo and Hf alloying[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,372(1/2):137.
[24] Geng Jie;Tsakiropeulos Panos .A study of the microstructures and oxidation of Nb-Si-Cr-Al-Mo in-situ composites a loyed with Ti,Hf and Sn[J].Intermetallics,2007,15(03):382.
[25] Kim Won Yong;Yeo In Dong;Ra Tae Yeub et al.Effect of V addition on microstructure and mechanical property in the Nb-Si alloy system[J].Journal of Alloys and Compounds,2004,364(1/2):186.
[26] 田玉新,郭建亭,周兰章,李谷松,叶恒强.Dy对Nb-Nb5Si3共晶合金显微组织和力学性能的影响[J].金属学报,2008(05):589-592.
[27] Y. X. Tian;J. T. Guo;Y. C. Liang;C. L. Wu;L. Z. Zhou;H. Q. Ye .Effect of Ho additions on the microstructure and mechanical properties of Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf alloys[J].Zeitschrift fur Metallkunde,2007(6):511-515.
[28] Bewlay B P;Lewandowksi J J;Jackson M R .Refractory metal-intermetallic in-situ composites for aircraft engines[J].JOM-Journal of the Minerals Metals and Materials Society,1997,49(08):44-45.
[29] 王晓丽,王国峰,张凯锋.细晶Nb-16Si难熔合金的制备及其烧结-锻造短流程成形[J].金属学报,2009(09):1030-1034.
[30] J. Sha;H. Hirai;T. Tabaru .High-temperature strength and room-temperature toughness of Nb-W-Si-B alloys prepared by arc-melting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):151-158.
[31] 姚成方,郭喜平,郭海生,李永恺.电弧熔炼Nb-Ti-Si-Cr-Hf-Al-B-Y超高温合金母合金锭的组织形成和成分分布特点[J].材料工程,2007(z1):164-168.
[32] Loria Edward A .Niobium-base superalloys via powder metallurgy technology[J].JOM-Journal of the Minerals Metals and Materials Society,1987,39(07):22-26.
[33] Gevens A J;Heerden D Van;Foecke T .Fabrication and evaluation of Nb/Nb5Si3 microlaminate foils[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1999,30A(11):2959-2965.
[34] Bewlay BP.;Jackson MR.;Reeder WJ.;Sutliff JA.;Lipsitt HA. .SOLIDIFICATION PROCESSING OF HIGH TEMPERATURE INTERMETALLIC EUTECTIC-BASED ALLOYS[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(0):534-543.
[35] Bewlay B P;Jackson M R;Subramanian P R .Processing high-temperature refractory-metal silicide in-situ composite[J].JOM-Journal of the Minerals Metals and Materials Society,1999,51(04):32.
[36] J.L. Yu;K.F. Zhang;G.F. Wang .Superplasticity of multiphase fine-grained Nb-16Si-2Fe refractory alloy[J].Intermetallics,2008(10):1167-1170.
[37] B.P. Bewlay;M.R. Jackson;J.-C. Zhao;P. R. Subramanian;M.G. Mendiratta;J.J. Lewandowski .Ultrahigh-Temperature Nb-Silicide-Based Composites[J].MRS bulletin,2003(9):646-653.
[38] 郑海忠,鲁世强,肖旋,李鑫,王克鲁,董显娟.Laves相NbCr2室温脆性的研究进展[J].稀有金属材料与工程,2007(01):178-183.
[39] 王东辉;郑欣;李中奎 等.Nb-W-Mo-Zr-C高温合金的时效强化[J].稀有金属材料与工程,2007,37A(04):618-620.
[40] 姚成方,郭喜平,郭海生.Nb-Ti-Si基超高温合金的有坩埚整体定向凝固组织分析[J].金属学报,2008(05):579-584.
[41] Shiyu Qu;Yafang Han;Liguo Song .Effects of alloying elements on phase stability in Nb-Si system intermetallics materials[J].Intermetallics,2007(5/6):810-813.
[42] Subramanian P R;Mendiratta M G;Dimiduk D M et al.Advanced intermetallic alloys-beyond gamma titanium aluminides[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1997,239/240:1-13.
[43] Ma C L;Li J G;Tan Y et al.Microstructure and mechanical properties of Nb/Nb5Si3 in-situ composites in Nb-Mo-Si and Nb-W-Si systems[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,386(1/2):375-380.
[44] Li Wei;Yang Haibo;Shan Aidang et al.Effects of Mo addition on the stabilities of β Nb5Si3[J].Intermetallics,2006,14(04):392-3965.
[45] 李伟,杨海波,单爱党,吴建生.Mo对于Nb/Nb5Si3原位复合材料室温韧性的影响[J].材料工程,2004(04):31-33,48.
[46] Song Hyo Jin .Processing.Phase transformation and microstructral evolution of advanced Nb-Ti-Si-Al-Cr-X alloys for high temperature aeroengine applications[D].Ohio:University of Cincinati,2005.
[47] Chan KS. .Alloying effects on fracture mechanisms in Nb-based intermetallic in-situ composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(0):513-522.
[48] 孙志平,郭喜平.合金化对铌基固溶体合金和铌硅化物基合金室温断裂韧性影响的研究进展[J].材料导报,2008(04):79-83.
[49] K.S.Chan;D.L.Davidson .Effects of Ti addition on cleavage fracture in Nb-Cr-Ti solid solution alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1999(4):925-939.
[50] Y.X. Tian;J.T. Guo;L.Y. Sheng .Microstructures and mechanical properties of cast Nb-Ti-Si-Zr alloys[J].Intermetallics,2008(6):807-812.
[51] 宋立国,曲士昱,李树索,韩雅芳.铈对铌硅系复合材料高温氧化性能的影响[C].中国科协第二届优秀博士生学术年会论文集,2004:489-493.
[52] J.T. Guo;LY. Sheng;Y.X. Tian;L.Z. Zhou;H.Q. Ye .Effect of Ho on the microstructure and compressive properties of NiAl-based eutectic alloy[J].Materials Letters,2008(23):3910-3912.
[53] 梁克炳.解理断裂机制[J].无锡职业技术学院学报,2003(04):25-26.
[54] 郑鹏,沙江波,刘东明,徐惠彬.Hf对Nb-15W-5Si-2B合金室温和高温力学性能的影响[J].航空学报,2008(01):227-232.
[55] Zheng P;Sha JB;Liu DM;Gong SK;Xu HB .Effect of Hf on high-temperature strength and room-temperature ductility of Nb-15W-0.5Si-2B alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(0):656-659.
[56] 郭喜平,高丽梅.电子束区熔定向凝固Nb基高温合金的组织和性能[J].航空材料学报,2006(03):47-51.
[57] 贾丽娜,李小溅,沙江波,张虎.定向凝固对Nb-14Si-22Ti-2Hf-2Al-4Cr合金组织和高低温力学性能的影响[J].稀有金属材料与工程,2010(08):1475-1479.
[58] 曲士昱,王荣明,韩雅芳.热处理对Nb-10Si合金显微组织的影响[J].航空材料学报,2001(03):9-12.
[59] Guo Haisheng;Guo Xiping .Effects of homogenizing and aging treatments on the microstrucure and microhardness of an Nb-silicide based ultrahigh temperature alloy[J].International Journal of Material Reference,2010,101:900-905.
[60] 郭海生,郭喜平.高温均匀化及时效处理对Nb-Ti-Si基超高温合金组织的影响[J].稀有金属材料与工程,2008(09):1601-1605.
[61] 宋立国,曲士昱,宋尽霞,李树索,宫声凯,韩雅芳.1250℃热处理对Nb-16Si-24Ti-6Cr-6Al-2Hf合金的组织影响[J].材料工程,2005(12):30-32,36.
[62] Tewari Raghvendra;Song Hyo Jin;Chatterjee Amit et al.Microstructure characterization of multicomponent Nb-Ti-Si-Cr-Al-X alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2006,37A(09):2669-2676.
[63] Nobuaki Sekido;Yoshisato Kimura;Wei Fugao et al.Effect of lamellar space on the mechanical properties of (Nb) /(Nb,Ti)5Si3 two-phase alloys[J].Journal of Japan Institute Metarials,2000,64:1056-1061.
[64] N. Sekido;Y. Kimura;S. Miura .Fracture toughness and high temperature strength of unidirectionally solidified Nb-Si binary and Nb-Ti-Si ternary alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2006(1/2):223-229.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net