针对喷射沉积铝合金板坯含有一定量的孔隙、直接轧制时易出现板坯表面横裂及边裂的问题,探讨了一种新型的准等静压轧制工艺-陶粒轧制.主要研究在陶粒轧制工艺过程中传压介质对喷射沉积8009/SiCP铝合金板坯轧制成形性能的影响.结果表明,在陶粒轧制过程中合理设计、选取及控制传压介质,避免了板坯轧制变形过程中裂纹的形成,有效地提高了喷射沉积铝合金板坯的轧制成形性能.
参考文献
| [1] | Rainer Gerling;Schimansky F P;Wegmann G et al.Spray forming of Ti 48.9Al (at%) and subsequent hot isostatie pressing and forging[J].Material Science and Engineering,2002,A326:73. |
| [2] | Kuhn H A;Ferguson B L;Simith O D .Pseudo-HIP using conven-tional presses[J].Metal Powder Report,1983,38(06):321. |
| [3] | 詹美燕,陈振华.喷射沉积多孔材料的轧制变形理论[J].材料研究学报,2004(06):661-667. |
| [4] | Cho H K;Suh J;Kim K T .Uniaxial compression of porous alloys steel at room and high temperatures[J].International Journal of Mechanical Sciences,1994,36(04):317. |
| [5] | Heung Nam Han;Yong-gi Lee;Kyu Hwan Oh et al.Analysis of hot forging of porous metals[J].Material Science and Engineering,1996,A206:81. |
| [6] | Heung Nam Han;Kyu Hwan Oh;Dong Nyung Lee .Anlysisi of forging limit for sintered porous metals[J].Scripta Metallurgica et Materialia,1995,32(12):1934. |
| [7] | Hariprasad S;Sastry S M L;Jerina K L et al.Microstructure and mechanical properties of dispersion-strengtened high-temperature Al-8.5Fe-1.3V-1.7Si alloys produced by atomized melt deposition process[J].Metallurgical and Materials Transactions,1993,24A(04):865. |
| [8] | 詹美燕,夏伟军,袁武华,傅定发,陈振华.喷射沉积耐热铝合金8009板坯轧制工艺及其对板材组织性能的影响[J].热加工工艺,2004(02):38-40. |
| [9] | Brian James W .Overview of high density P/M forming processes[J].Int J Powder Metall Powder Techn,1985,21(03):163. |
| [10] | Ferguson B;Kuhn A;Smith O D et al.Hot consolidation of porous performs using[J].Int J Powder Metall Powder Techn,1984,20(02):131. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%