For friction stir welding （FSW）, a new idea is put forward in this paper to weld the thin plate of Al alloy by using the rotational tool without pin. The experiments of FSW are carried out by using the tools with inner-concave-flute shoulder, concentric-circles-flute shoulder and three-spiral-flute shoulder, respectively. The experimental results show that the grain size in weld nugget zone attained by the tool with three-spiral-flute shoulder is nearly the same while the grain sizes decrease with the decrease of welding velocity. The displacement of material flow in the heat-mechanical affected zone by the tool with three-spiral-flute shoulder is much larger than that by the tool with inner-concave-flute shoulder or concentric-circles–flute shoulder. The above-mentioned results are verified by numerical simulation. For the tool with three-spiral-flute shoulder, the tensile strength of FSW joint increases with the decrease of welding velocity while the value of tensile strength attained by the welding velocity of 20 mm/min and the rotation speed of 1800 r/min is about 398 MPa, which is 80% more than that of parent mental tensile strength. Those verify that the tool with three-spiral-flute shoulder can be used to join the thin plate of Al alloy.
参考文献
| [1] | A. Heinz;A. Haszler;C. Keidel;S. Moldenhauer;R. Benedictus;W. S. Miller .Recent development in aluminium alloys for aerospace applications[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1):102-107. |
| [2] | N. Afrin;D.L. Chen;X. Cao;M. Jahazi .Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):179-186. |
| [3] | M. Jariyaboon;A.J. Davenport;R. Ambat;B.J. Connolly;S.W. Williams;D.A. Price .The effect of welding parameters on the corrosion behaviour of friction stir welded AA2024-T351[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2007(2):877-909. |
| [4] | T. U. SEIDEL;A. P. PEYNOLDS .Visualization of the Material Flow in AA2195 Friction-Stir Welds Using a Marker Insert Technique[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(11):2879-2884. |
| [5] | M. Guerra;C. Schmidt;J.C. McClure .Flow patterns during friction stir welding[J].Materials Characterization,2002(2):95-101. |
| [6] | H. W. Zhang;Z. Zhang;J. T. Chen .3D modeling of material flow in friction stir welding under different process parameters[J].Journal of Materials Processing Technology,2007(1):62-70. |
| [7] | G. Buffa;J. Hua;R. Shivpuri;L. Fratini .A continuum based fern model for friction stir welding—model development[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):389-396. |
| [8] | H. N. B. Schmidt;T. L. Dickerson;J. H. Hattel .Material flow in butt friction stir welds in AA2024-T3[J].Acta materialia,2006(4):1199-1209. |
| [9] | R. Nandan;G.G. Roy;T.J. Lienert .Three-dimensional heat and material flow during friction stir welding of mild steel[J].Acta materialia,2007(3):883-895. |
| [10] | T.R. McNelley;S. Swaminathan;J.Q. Su .Recrystallization mechanisms during friction stir welding/processing of aluminum alloys[J].Scripta materialia,2008(5):349-354. |
| [11] | Z.W. Chen;T. Pasang;Y. Qi .Shear flow and formation of Nugget zone during friction stir welding of aluminium alloy 5083-O[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):312-316. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%