报道了一种从室温到1 000℃能够连续润滑的Ni3Al基自润滑复合材料.该材料选用高温强度和抗氧化性优异的Ni3Al金属间化合物为基体材料,利用多种高、低温固体润滑剂的复合和协同效应实现了宽温域连续润滑.本文介绍了利用真空热压烧结方法制备该自润滑复合材料的简要过程,研究了材料的高温力学性能,并在球盘式高温摩擦试验机(HT-1000型)和销盘式高速摩擦试验机上分别测试了不同温度和转速下Ni3Al基自润滑复合材料的摩擦磨损性能.结果表明,材料在1 000℃时具有优异的力学性能(压缩强度40~45 MPa)和自润滑性能(摩擦因数0.28 ~0.25),在高载和高速条件下具有稳定的更低的摩擦因数.
参考文献
[1] | 石淼森.固体润滑技术[M].北京:中国石化出版社,1998 |
[2] | 松永正久;范煜.固体润滑手册[M].北京:机械工业出版社,1986 |
[3] | 薛群基,吕晋军.高温固体润滑研究的现状及发展趋势[J].摩擦学学报,1999(01):91-96. |
[4] | 刘如铁,李溪滨,程时和.金属基固体自润滑材料的研究概况[J].粉末冶金工业,2001(03):51-56. |
[5] | Sliney H E .Wide temperature spectrum self-lubricating coatings prepared by plasma spraying[J].Thin Solid Films,1979,64:217-221. |
[6] | 牛淑琴;朱家佩;欧阳锦林 .几种高温自润滑复合材料的研制与性能研究[J].摩擦学学报,1995,15(04):324. |
[7] | Dellacorte C;Sliney H E .Tribological properties of PM212[J].Lubrication Engineering,1991,47(04):298-303. |
[8] | Sliney H E .Solid lubricant materials for high temperatures-a review[J].Tribology International,1982,5:303-315. |
[9] | Dellacorte C;Sliney H E .Tribological and Mechanical Comparison of sintered and HIP ped PM212:high temperature self-lubricating composites[J].Lubrication Engineering,1992,48(11):877-885. |
[10] | Ding CH;Li PL;Ran G;Zhou JN .PM304 coating on a Ni-based superalloy by PM technique[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(0):755-758. |
[11] | C. H. Ding;P. L. Li;G. Ran;Y. W. Tian;J. N. Zhou .Tribological property of self-lubricating PM304 composite[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(5/6):575-581. |
[12] | Du, L.;Huang, C.;Zhang, W.;Li, T.;Liu, W. .Preparation and wear performance of NiCr/Cr_3C_2-NiCr/hBN plasma sprayed composite coating[J].Surface & Coatings Technology,2011(12):3722-3728. |
[13] | Blau P J;Devore C E .Sliding friction and wear behavior of several nickel aluminide alloys under dry and lubricated conditions[J].Tribology International,1990,23:226-234. |
[14] | La PQ.;Liu WM.;Yang SR.;Xue QJ. .Tribological properties of Ni3Al-Cr7C3 composite coatings under liquid paraffin lubrication[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(1/2):1-8. |
[15] | La P Q;Xue Q J;Liu W M .Effects of boron doping on tribological properties of Ni3Al-Cr7C3 coatings under dry sliding[J].Wear,2001,249:94-100. |
[16] | La P Q;Xue Q J;Liu W M .Tribological properties of Ni3Al-Cr7C3 composite coating under water lubrication[J].Tribology International,2000,33:469-475. |
[17] | Solmaz Y;Kelestemur M H .Wear behavior of borondoped Ni3Al material at elevated temperature[J].Wear,2004,257:1015-1021. |
[18] | Wang Y.;Jones H.;Lieblich M.;Rainforth WM. .Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy-Ni3Al powder metallurgy composite[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(2):1421-1432. |
[19] | Zhang S T;Zhou J S;Guo B G et al.Preparation and characterization of reactively sintered Ni3Al-hBN-Ag composite coating on Ni-based superalloy[J].Journal of Alloys and Compounds,2008,473:462-466. |
[20] | Gong K;Luo H L;Feng D et al.Wear of Ni3Al-based materials and its chromium-carbide reinforced composites[J].Wear,2008,265:1751-1755. |
[21] | Liu C T;White C L .Dynamic embrittlement of borondoped Ni3Al alloys at 600℃C[J].Acta Metallurgica,1987,35:643-649. |
[22] | V.K. Slicka;S.C. Deevi .Advances in processing of Ni_3Al-based intermetallics and applications[J].Intermetallics,2000(9/11):1329-1337. |
[23] | Shee SK.;De M.;Pradhan SK. .Effect of alloying, on the microstructure and mechanical properties of Ni3Al[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,1998(1/2):249-256. |
[24] | Czeppe T;Wierzbinski S .Structure and mechanical properties of NiAl and Ni3Al-based alloys[J].International Journal of Mechanical Sciences,2000,42:1499-1518. |
[25] | Y.Han;C.Xiao .Effect of yttrium on microstructure and properties of Ni_3Al base alloy IC6[J].Intermetallics,2000(5/6):687-691. |
[26] | Lee D B;Santella M L .High temperature oxidation of Ni3Al alloy containing Cr,Zr,Mo,and B[J].Materials Science and Engineering A,2004,374:217-223. |
[27] | Y. LU;W. CHEN;R. EADIE .Evaluation of high temperature corrosion resistance of a Ni_3Al (Mo) alloy[J].Intermetallics,2004(12):1299-1304. |
[28] | Lee WH. .Oxidation and sulfidation of Ni3Al[J].Materials Chemistry and Physics,2002(1):26-37. |
[29] | Lee WH.;Lin RY. .Hot corrosion mechanism of intermetallic compound Ni3Al[J].Materials Chemistry and Physics,2003(1):86-96. |
[30] | 朱定一,关翔锋,陈丽娟,汤伟.新型Ni3Al/石墨高温固体自润滑材料的制备及其性能[J].中国有色金属学报,2004(04):528-533. |
[31] | Shengyu Zhu;Qinling Bi;Jun Yang;Weimin Liu;Qunji Xue .Ni_3Al matrix high temperature self-lubricating composites[J].Tribology International,2011(4):445-453. |
[32] | Shengyu Zhu;Qinling Bi;Hairong Wu;Jun Yang;Weimin Liu .NiAl Matrix High-Temperature Self-Lubricating Composite[J].Tribology letters,2011(3):535-540. |
[33] | Shengyu Zhu;Qinling Bi;Jun Yang;Weimin Liu .Tribological Property of Ni_3Al Matrix Composites with Addition of BaMoO_4[J].Tribology letters,2011(1):55-63. |
[34] | Shengyu Zhu;Qinling Bi;Jun Yang;Weimin Liu .Influence of Cr content on tribological properties of Ni_3Al matrix high temperature self-lubricating composites[J].Tribology International,2011(10):1182-1187. |
[35] | Shengyu Zhu;Qinling Bi;Jun Yang;Weimin Liu .Effect of Fluoride Content on Friction and Wear Performance of Ni_3Al Matrix High-Temperature Self-Lubricating Composites[J].Tribology letters,2011(3):341-349. |
[36] | Shengyu Zhu;Qinling Bi;Jun Yang;Weimin Liu;Qunji Xue .Effect of particle size on tribological behavior of Ni_3Al matrix high temperature self-lubricating composites[J].Tribology International,2011(12):1800-1809. |
[37] | Zhu S Y;Bi Q L;Yang J et al.Ni3Al matrix composite with lubricous tungstate at high temperatures[J].Tribology Letters,2012,45:251-255. |
[38] | Shengyu Zhu;Qinling Bi;Muye Niu;Jun Yang;Weimin Liu.Tribological behavior of NiAl matrix composites with addition of oxides at high temperatures[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2012:423-434. |
[39] | SHENGYU ZHU;QINLING BI;LINGQIAN KONG;J. UNYANG;WEIMIN LIU .Barium Chromate as a Solid Lubricant for Nickel Aluminum[J].Tribology Transactions,2012(2):218-223. |
[40] | Niu M Y;Bi Q L;Yang J et al.Tribological performance of a Ni3Al matrix self-lubricating composite coating tested from 25 to 1000℃[J].Surface and Coatings Technology,2012,206:3938-3943. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%