Influence of Cr, Mn and Mo Addition on Structure and Properties of V Microalloyed Medium Carbon Steels

材料科学技术（英文）, 2012, 28(11): 1053-1058.

Influence of Cr, Mn and Mo Addition on Structure and Properties of V Microalloyed Medium Carbon Steels

^1, , ^2, , ^3, , ^4,

1.wDepartment of Metallurgical Engineering, Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4,11120 Belgrade, Serbia

2.wDepartment of Metallurgical Engineering, Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4,11120 Belgrade, Serbia

3.wDepartment of Metallurgical Engineering, Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4,11120 Belgrade, Serbia

4.wDepartment of Metallurgical Engineering, Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4,11120 Belgrade, Serbia

关键词：力学性能测试 , V微合金化 , 中碳结构钢 , 中碳钢 , 针状铁素体 , 铬 , 奥氏体化温度 , 锰

Influence of Cr, Mn and Mo Addition on Structure and Properties of V Microalloyed Medium Carbon Steels

Keywords： Medium-carbon steels , Chromium , Molybdenum , Manganese addition , Bainite , Acicular ferrite ,

The effect of austenitizing temperature and Cr, Mo and Mn addition on microstructure and mechanical properties of V microalloyed medium carbon steel has been studied by means of metallography and mechanical testing. The addition of Cr, Mn and Mo leads to a decrease in yield strength (YS) by approximate 100 MPa in comparison to the base steel. It is assumed that Mn and Mo increase hardenability by promoting the formation of bainitic sheaves (BS), i.e. by suppressing the formation of ferrite-pearlite and acicular ferrite (FP-AF). Cr at the level used in this work is not that effective. Presence and packet size of bainitic sheaves decrease the Charpy V-notch impact energy at 20 ℃ (CVN20) in comparison to ferrite-pearlite and acicular ferrite microstructures.

参考文献

[1]	F. ISHIKAWA;T. TAKAHASHI .The formation of intragranular ferrite plates in medium-carbon steels for hot-forging and its effect on the toughness[J].ISIJ International,1995(9):1128-1133.
[2]	M.PRIKRYL;A. KROUPA .Precipitation Behavior in a Medium Carbon, Ti-V-N Microalloyed Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(5):1149-1165.
[3]	C. CAPDEVILA;J. P. FERRER;C. GARCIA-MATEO .Influence of deformation and molybdenum content on acicular ferrite formation in medium carbon steels[J].ISIJ International,2006(7):1093-1100.
[4]	M. Diaz-Fuentes;I. Gutierrez .Analysis of different acicular ferrite microstructures generated in a medium-carbon molybdenum steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):316-324.
[5]	I.MADARIAGA .Upper Acicular Ferrite Formation in a Medium-Carbon Microslloyed Steel by Isothermal Transformation: Nucleation Enhancement by CuS[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1998(3):1003-1016.
[6]	K. He;D. V. Edmonds .Formation of acicular ferrite and influence of vanadium alloying[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2002(3):289-296.
[7]	S.Zajac .Strengthening Mechanisms in Vanadium Microalloyed Steels Intended for Long Products[J].ISIJ International,1998(10):1130-1139.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Influence of Cr, Mn and Mo Addition on Structure and Properties of V Microalloyed Medium Carbon Steels

Influence of Cr, Mn and Mo Addition on Structure and Properties of V Microalloyed Medium Carbon Steels

参考文献