Uniaxial tensile tests were carried out in the temperature range of 250-450 ℃ and the strain rate range of 0.7×10-3-1.4×10-1s-1 to evaluate the superplasticity of AZ31 Mg alloy. The threshold stress which characterizes the difficulty for grain boundary sliding was calculated at various temperatures. The surface relieves of superplastically deformed specimens were observed by using a scanning electronic microscope (SEM). Results show that, at the temperature of 400 ℃ and strain rate of 0.7×10-3 s-1, the strain rate sensitivity exponent, i e, m value reaches 0.47 and the maximum elongation of 362.5% is achieved. Grain boundary sliding (GBS) is the primary deformation mechanism and characterized by a pronounced improvement in the homogeneity with increasing temperatures. A large number of filaments were formed at the end of deformation and intergranular cavities were produced with the necking and fracture of filaments. Finally, the model for the formation of intergranular cavities was proposed.
参考文献
| [1] | Zhang Jin'an;Wang Liqiu;Li Qingshan .Fibred magnesium hydroxide and flame-resistant polyene material[J].Journal of Wuhan University of Technology.Materials Science edition,1999(2):23-27. |
| [2] | LI Si-nian;SONG Shou-zhi;YU Tian-qing .Properties and Structure of Magnesium Matrix Composite Reinforced with CNTs[J].Journal of Wuhan University of Technology.Materials Science edition,2004(1):65-68. |
| [3] | Shyong Lee;Yung-Hung Chen;Jian-Yih Wang .Isothermal sheet formability of magnesium alloy AZ31 and AZ61[J].Journal of Materials Processing Technology,2002(1/2):19-24. |
| [4] | H. Takuda;T. Enami;K. Kubota;N. Hatta .The formability of a thin sheet of Mg-8.5Li-1Zn alloy[J].Journal of Materials Processing Technology,2000(1/3):281-286. |
| [5] | H. Takuda;H. Fujimoto;N. Hatta .Modelling on flow stress of MG-Al-Zn alloys at elevated temperatures[J].Journal of Materials Processing Technology,1998(0):513-516. |
| [6] | N N Magnesium;Magnesium Alloys-Ullmann's.Encyclopedia of Industrial Chemistry,Reprint of Articles from 5th Edition[M].VCH,Weinheim,1990:145. |
| [7] | T. Mohri;M. Mabuchi;M. Nakamura;T. Asahina;H. Iwasaki;T. Aizawa;K. Higashi .Microstructural evolution and superplasticity of rolled Mg-9Al-1Zn[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):139-144. |
| [8] | Y.H. Wei;Q.D. Wang;Y.P. Zhu .Superplasticity and grain boundary sliding in rolled AZ91 magnesium alloy at high strain rates[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):107-115. |
| [9] | Hiroyuki Watanabe;Toshiji Mukai;Koichi Ishikawa;Kenji Higashi .Low temperature superplasticity of a fine-grained ZK60 magnesium alloy processed by equal-channel-angular extrusion[J].Scripta materialia,2002(12):851-856. |
| [10] | J. C. Tan;M. J. Tan .Superplasticity in a rolled Mg-3Al-1Zn alloy by two-stage deformation method[J].Scripta materialia,2002(2):101-106. |
| [11] | X Wu;Y Liu .Superplasticity of Coarse-grained Magnesium Alloy[J].Scripta Materialia,2002,46:269-274. |
| [12] | Watanabe H.;Mukai T.;Kohzu M.;Tanabe S.;Higashi K.;Tsutsui H. .Deformation mechanism in a coarse-grained Mg-Al-Zn alloy at elevated temperatures[J].International Journal of Plasticity,2001(3):387-397. |
| [13] | A. Bussiba;A. Ben Artzy;A. Shtechman;S. Ifergan;M. Kupiec .Grain refinement of AZ31 and ZK60 Mg alloys — towards superplasticity studies[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1):56-62. |
| [14] | R A Storer;J L Cornillot.Annual Book of ASTM Standards[M].West Conshohocken,PA:ASTM,2000:229. |
| [15] | T G Nieh;J Wadsworth.Superplasticity in Metals and Ceramics[M].Cambridge:Cambridge University Press,1997:218. |
| [16] | O A Kaibyshev.Superplasticity of Alloys,Intermetallides,and Ceramics[M].Berlin:Springer-Verlag,1992:316. |
| [17] | O D Sherby;J Wadsworth .Superplasticity-recent Advances and Future Directions[J].Progress in Materials Science,1989,33:169-221. |
| [18] | F A Mohamed .Interpretation of Superplastic Flow in Terms of a Threshold Stress[J].Journal of Materials Science,1983,18:582-592. |
| [19] | O D Sherby;M Burke .Mechanical Behavior of Crystalline Solids at Elevated Temperature[J].Progress in Materials Science,1966,13:323-390. |
| [20] | Alfonso Bravo-León;Manuel Jiménez-Melendo;Domínguez-Rodríguez;Atul H. Chokshi .The role of a threshold stress in the superplastic deformation of fine-grained yttria-stabilized zirconia polycrystals[J].Scripta materialia,1996(7):1155-1160. |
| [21] | J.C. Tan;M.J. Tan .Superplasticity and grain boundary sliding characteristics in two stage deformation of Mg-3Al-1Zn alloy sheet[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):81-89. |
| [22] | O. A. Kaibyshev .Superplasticity resulting from cooperative grain boundary slicing[J].Acta materialia,1998(14):4911-4916. |
| [23] | Kaibyshev R.;Musin F.;Lesuer DR.;Nieh TG. .Superplastic behavior of an Al-Mg alloy at elevated temperatures[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):169-177. |
| [24] | N E Paton;C H Hamilton.Superplastic Forming of Structural Alloys[M].New York:AIME,1982:13. |
| [25] | J.C. Tan;M.J. Tan .Dynamic continuous recrystallization characteristics in two stage deformation of Mg-3Al-1Zn alloy sheet[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):124-132. |
| [26] | Z.Y. Ma;R.S. Mishra;M.W. Mahoney .Superplastic deformation behaviour of friction stir processed 7075Al alloy[J].Acta materialia,2002(17):4419-4430. |
| [27] | M A Michael;H Baker.ASM Specialty Handbook:Magnesium and Magnesium Alloys[M].OHIO:ASM International,1999:75. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%