基于热模拟试验,构建TC18合金的Arrhenius型材料本构关系,并将其应用于TC18板坯多道次轧制工艺的有限元仿真,获得各道次轧制过程中的轧件温度场、等效应力?应变场、损伤场等分布情况以及载荷?轧制时间状态,进而为轧件尺寸预测以及轧机规格的选取提供指导.轧件每道次仿真所得尺寸与具体试验所得尺寸比较可知,宽展误差不超过0.7%,长度误差不超过4%.经四道次热轧试验后,在轧件边缘1 mm区域出现了裂纹,与仿真所得损伤场分布一致.上述验证表明仿真结果能够与热轧试验较好吻合.
@@@@Based on thermal simulation a Arrhenius type constitutive relationship of TC18 titanium alloy was applied to the finite element simulation of multi-lane hot rolling. The field of temperature, stress?strain and damage and the load?time status at every lane were investigated to predict the rolling size and the specification of rolling mill. The error in spreading width and rolling length between simulating and experimental results are less than 0.7%and 4%at each lane, respectively. Crack occurs at 1 mm edge of the workpiece after four-lane hot rolling experiment, which is in accordance with the damage field obtained from simulation. The above verification shows that the simulation are coincident with the experimental results.
参考文献
| [1] | 陈玉良,刘建良,黄子良,马磊,胡建成.国内钛带卷生产现状及发展前景[J].钛工业进展,2010(05):6-9. |
| [2] | 王方,高敬.世界非航空钛市场现状及发展趋势[J].钛工业进展,2009(06):5-10. |
| [3] | 李明利,舒滢,冯毅江,陈婷婷,祝建雯.我国钛及钛合金板带材应用现状分析[J].钛工业进展,2011(06):14-17. |
| [4] | 韩栋,张鹏省,毛小南,卢亚锋,奚正平,杨建朝.BT22钛合金及其大型锻件的研究进展[J].材料导报,2010(03):46-50. |
| [5] | 赵红霞,虞文军.航空用高强度BT22钛合金的研发和应用[J].航空制造技术,2010(01):85-86,90. |
| [6] | 王金雪,袁鸿,余槐.TC18钛合金手工TIG焊与电子束焊焊接接头的组织与性能对比[J].焊接,2010(03):33-35. |
| [7] | 胡愈刚,王晓平,周亮.TC18钛合金焊接技术在飞机起落架制造中的应用研究[J].航空制造技术,2011(16):72-74. |
| [8] | 王蕊宁,高文柱,戚运莲,吕利强,奚正平.有限元模拟在板材轧制中的应用[J].中国材料进展,2009(04):56-60. |
| [9] | 于德军,柏春光,徐东生,李渭清,何书林,雷家峰,刘羽寅,杨锐.钛合金开坯锻造过程的有限元模拟[J].中国有色金属学报,2010(z1):500-504. |
| [10] | DING Han-lin,KANAMORI Nao,HONMA Tomoyuki,KAMADO Shigeharu,KOJIMA Yo.FEM analysis for hot rolling process of AM60 alloy[J].中国有色金属学会会刊(英文版),2008(z1):242-246. |
| [11] | SUI Feng-li,CHEN Li-qing,LIU Xiang-hua,XU Li-xia.Application of FEM to Hot Continuous Rolling Process for Inconel 718 Alloy Round Rod[J].钢铁研究学报（英文版）,2009(05):43-49. |
| [12] | M. Wang;H. Yang;Z. C. Sun;L. G. Guo .Analysis of coupled mechanical and thermal behaviors in hot rolling of large rings of titanium alloy using 3D dynamic explicit FEM[J].Journal of Materials Processing Technology,2009(7):3384-3395. |
| [13] | 徐磊;于德军;柏春光;王刚 崔玉友 杨锐 .TiAl 基合金的热轧过程模拟[J].稀有金属材料与工程,2008,37(z3):897-900. |
| [14] | MOISEYEV VALENTIN N;董宝明;张胜;郭德伦 梁慧凤 朱知寿.钛合金在俄罗斯飞机及航空航天上的应用[M].北京:航空工业出版社,2008:75-79. |
| [15] | 罗雷,毛小南,杨冠军,牛蓉蓉.BT22钛合金简介[J].热加工工艺,2009(14):14-16. |
| [16] | 张翥;谢水生;赵云豪.钛材塑性加工技术[M].北京:冶金工业出版社,2010:27-78. |
| [17] | 余琨,王晓艳,蔡志勇,王日初,史禔.AZ31镁合金热轧开坯变形行为的有限元模拟[J].中南大学学报（自然科学版）,2009(06):1535-1539. |
| [18] | ZENG Zhi-peng;JONSSON S;ZHANG Yan-shu .Constitutive equation for pure titanium at elevated temperatures[J].Materials Science and Engineering A,2009,505(1/2):116-119. |
| [19] | MCQUEEN H J;YUE S;RYAN N D;FRY E .Hot Working characteristics of steels in austenitic state[J].Journal of Materials Processing Technology,1995,53(1/2):293-310. |
| [20] | ZENER C;HOLLOMOM J H .Effect of strain-rate upon the plastic flow of steel[J].Journal of Applied Physics,1994,15(01):22-27. |
| [21] | SELLARS C;MCTEGART W .On the mechanism of hot deformation[J].ACTA METALLURGICA SINICA,1966,14(09):1136-1138. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%