Fe-N thin films were fabricated on both 100Si and NaCl substrates by RF magnetron sputtering under low nitrogen partial pressure. The microstructure and magnetic properties of Fe-N thin films were investigated with the increase of the substrate temperature (Ts) and the annealing temperature (Ta). It is more difficult for nitrogen atoms to enter the Fe lattice under higher Ts above 150℃. The phase evolution is visible at higher Ta above 200℃. The phase transformation of α''-Fe16N2 occurred at 400℃. The change of crystal size with Ta was clearly visible from bright and dark field images. The clear high-resolution electron microscope (HREM) images of 110α, 111γ', 112α'', and 200α'' phases were observed. The interplanar distances from TEM and HREM match the calculated values very well. From the results of the vibrating sample magnetometer (VSM), the good magnetic properties of Fe-N films were obtained at 150℃ of Ts and 200℃ of Ta, respectively.
参考文献
| [1] | |
| [2] |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%