通过改变挤出机的螺杆结构及螺杆转速,研究了熔融挤出过程中,剪切强度的变化对聚酰胺66/玻璃纤维复合材料力学及流变性能的影响.结果表明,当螺杆后段的捏合块数量由7块减少到4块,且螺杆转速为120 r/min时,熔体受到的机械剪切应力最小,在挤出过程中有效地减少了玻纤的断裂,使其平均长度最长,复合材料的力学性能最高.聚酰胺66中加入玻璃纤维能显著影响复合材料的流变行为,玻纤的平均长度越长,与基体间的作用就越强,共混体系的复数黏度及动态储能模量也越高.
参考文献
| [1] | J. L. Thomason .Micromechanical parameters from macromechanical measurements on glass reinforced polyamide 6, 6[J].Composites science and technology,2001(14):2007-2016. |
| [2] | J.L.Thomason .The influence of fibre properties of the performance of glass-fibre-reinforced polyamide 6,6[J].Composites science and technology,1999(16):2315-2328. |
| [3] | D.M. Laura;H. Keskkula;J.W. Barlow;D.R. Paul .Effect of glass fiber surface chemistry on the mechanical properties of glass fiber reinforced, rubber-toughened nylon 6[J].Polymer: The International Journal for the Science and Technology of Polymers,2002(17):4673-4687. |
| [4] | J.L. Thomason .Interfacial strength in thermoplastic composites-at last an industry friendly measurement method[J].Composites, Part A. Applied science and manufacturing,2002(10):1283-1288. |
| [5] | J.L.Thomason .Structure-Property Relationships in Glass Reinforced Polyamide,Part 2:The Effects of Average Fiber Diameter and Diameter Distribution[J].Polymer Composites,2007(3):331-343. |
| [6] | H. Azizi;I. Ghasemi .Investigation on the Dynamic Melt Rheological Properties of Polypropylene/Wood Flour Composites[J].Polymer Composites,2009(4):429-435. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%