利用优化的等离子束工艺参数对无限冷激铸铁表面进行合金化强化处理,并经650℃高温回火处理,获得高硬度、耐磨的合金化层组织.利用扫描电镜(SEM)、X射线衍射仪(XRD)、显微硬度计对等离子束合金化层进行分析,并对摩擦磨损性能进行了分析.试验结果表明,合金化层与基体之间实现了冶金结合,并形成了以莱氏体、马氏体、碳化物为主的显微组织,合金化层的细晶强化和回火弥散析出强化等强化作用,使显微硬度高达1200 HV0.2,合金化加回火处理后的耐磨性相对于基体提高了大约2倍.
参考文献
| [1] | 许巧玉,于青,李铸刚,刘湘.70Mn2Mo铸钢热轧辊的激光表面强化[J].金属热处理,2002(08):32-34. |
| [2] | 李美艳,王勇,韩彬,程义远,宋立新.高铬钢激光熔凝处理后的组织与耐蚀性能[J].材料保护,2010(03):61-63. |
| [3] | 孙桂芳,刘常升,陶兴启,陈岁元.高镍铬无限冷硬铸铁轧辊表面激光合金化的研究[J].东北大学学报（自然科学版）,2008(06):845-848. |
| [4] | 欧阳安,黄安国,王长贵,王玉涛,李志远.高镍铬铸铁轧辊材料激光相变组织与耐磨性研究[J].电焊机,2007(08):45-49. |
| [5] | CHEN Hao;LI Hui-qi .Microstructure and wear resistance of Fe-based coatings by plasma jet surface metallurgy[J].Materials Letters,2006,60(11):1311-1314. |
| [6] | Pan WX;Meng X;Li G;Fei QX;Wu CK .Feasibility of laminar plasma jet hardening of cast iron surface[J].Surface & Coatings Technology,2005(2/3):345-350. |
| [7] | Yuan Gao;Qing Gao;Jin-Yong Xu;Hong-Yi Liao;Zhong Xu .Morphology and composition of plasma alloying of Cr–Mo layer[J].Surface & Coatings Technology,2007(9/11):5526-5528. |
| [8] | Zhiyong He;Jinxiang Zhao;Zhong Xu .Plasma surface alloying of spheroidal graphite iron[J].Surface & Coatings Technology,2000(1/3):574-578. |
| [9] | 赵剑波,崔洪芝,孙海洋,张瑛.模具表面等离子处理的研究[J].模具制造,2005(09):49-51. |
| [10] | 王文焱,徐晶,谢敬佩,王爱华.TiC含量对激光合金化层组织和耐磨性的影响[J].金属热处理,2010(05):34-37. |
| [11] | L. Bourithis;G.D. Papadimitriou .Synthesizing a class "M" high speed steel on the surface of a plain steel using the plasma transferred arc (PTA) alloying technique: microstructure and wear properties[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):165-172. |
| [12] | J. Piekoszewski;R. Grotzschel;E. Wieser;J. Stanislawski;Z. Werner;W. Szymczyk;J. Langner .Kinetics of the pulsed erosion deposition process induced by high intensity plasma beams[J].Surface & Coatings Technology,2000(0):394-399. |
| [13] | 迟宏宵,马党参,王昌,陈再枝,雍岐龙.Cr8Mo2SiV钢二次硬化机理的研究[J].金属学报,2010(10):1181-1185. |
| [14] | J. Chen;X. Y. Li;T. Bell;H. Dong .Improving the wear properties of Stellite 21 alloy by plasma surface alloying with carbon and nitrogen[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2008(3/4):157-165. |
| [15] | 李美艳,王勇,韩彬,宋立新,程义远.热处理中高铬钢激光熔凝层的组织转变[J].材料热处理学报,2011(01):103-108. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%