平面应变热模拟技术是塑性加工领域广泛应用的一种实验室模拟技术,现被广泛应用于测量金属的变形抗力以及金属的流动状态,是热轧过程模拟的最好的方法.为了全面研究平面应变技术,采用理论分析、数值模拟以及物理模拟的方法,系统分析了刚端、摩擦、试样尺寸以及对中性对平面应变过程中的应力状态以及金属流动的影响.研究结果显示各因素对金属流动以及实验结果的准确性有较大影响.
参考文献
| [1] | 周纪华;管克智.金属塑性变形阻力[M].北京:机械工业出版社,1989:31. |
| [2] | Wong S F;Hodson P D;Thomson P F .Comparison of Torsion and Plane-Strain Compression for Predicting Mean Yield Strength in Single and Multiple-Pass Flat Rolling Using Lead to Model Hot Steel[J].Journal of Materials Processing Technology,1995,58:601. |
| [3] | Oskar Pawelski;Radko Kaspai;Düsseldorf .Laboratory Simulation of the Thermomechanical Processing of Steel[J].Materialprüfung,1988,30:357. |
| [4] | 康永林;傅杰;柳得橹.薄板坯连铸连轧钢的组织性能控制[M].北京:冶金工业出版社,2006:101. |
| [5] | 牛济泰.材料和热加工领域的物理模拟技术[M].北京:国防工业出版社,1999:32. |
| [6] | Hand R J;Foster S R;Sellars C M .Tmeperature Changes During Hot Plane Strain Compression Testing[J].Materials Science and Technology,2000,16:442. |
| [7] | Evans R W;Scharning P J .Systematic Errors in Flow Stress Measurement for the Hot Plane Strain Compression Test[J].Materials Science and Technology,2004,20:431. |
| [8] | Wong S F;Hodgson P D;Thomson P F .Room Temperature Deformation and Recrystailisation Behavior of Lead and LeadTin Alloys in Torsion and Plane Strain Compression[J].Materials Science and Technology,1999,15:689. |
| [9] | Mirza M S;Sellars C M .Modeling the Hot Plane Strain Compression Test Part 1-Effect of Specimen Geometry,Strain Rate,and Friction on Deformation[J].Materials Science and Technology,2001,17:1133. |
| [10] | Mirza M S;Sellars C M .Modeling the Hot Plane Strain Compression Test Part 2-Effect of Friction and Specimen Geometry on Spread[J].Materials Science and Technology,2001,17:1142. |
| [11] | Duckham A;Knutsen R D .Asymmetric Flow During Plane Strain Compression Testing of Aluminum Alloys[J].Material Science and Engineering,1998,256:220. |
| [12] | 赵志业.金属塑性变形与轧制理论[M].北京:冶金工业出版社,2004:77. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%